Resumen del contenido incluido en la página 1
Owner’s Manual
Thank you, and congratulations on your choice of the VK-8 combo organ.
Before using this unit, carefully read the sections entitled: “IMPORTANT
SAFETY INSTRUCTIONS” (p. 2), “USING THE UNIT SAFELY” (p. 3,4), and
“IMPORTANT NOTES” (p. 5). These sections provide important information
concerning the proper operation of the unit. Additionally, in order to feel
assured that you have gained a good grasp of every feature provided by
your new unit, owner’s manual should be read
Resumen del contenido incluido en la página 2
The lightning flash with arrowhead symbol, within an CAUTION equilateral triangle, is intended to alert the user to the RISK OF ELECTRIC SHOCK presence of uninsulated “dangerous voltage” within the DO NOT OPEN product’s enclosure that may be of sufficient magnitude to ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, The exclamation point within an equilateral triangle is DO NOT REMOVE COVER
Resumen del contenido incluido en la página 3
USING THE UNIT SAFELY The symbol alerts the user to important instructions Used for instructions intended to alert or warnings.The specific meaning of the symbol is the user to the risk of death or severe determined by the design contained within the injury should the unit be used triangle. In the case of the symbol at left, it is used for improperly. general cautions, warnings, or alerts to danger. Used for instructions intended to alert The sym
Resumen del contenido incluido en la página 4
USING THE UNIT SAFELY 015 110a • Do not force the unit’s power-supply cord to share • Whenever you suspect the possibility of lightning an outlet with an unreasonable number of other in your area, pull the plug on the power cord out devices. Be especially careful when using of the outlet. extension cords—the total power used by all .......................................................................................................... devices you have connected to t
Resumen del contenido incluido en la página 5
IMPORTANT NOTES 291b In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages 2, 3 and 4, please read and observe the following: 356 Power Supply • Do not allow rubber, vinyl, or similar materials to remain on the unit for long periods of time. Such objects can 301 • Do not use this unit on the same power circuit with any discolor or otherwise harmfully affect the finish. device that will generat
Resumen del contenido incluido en la página 6
Contents Conventions Used in This Manual .......................................................................................................... 1 USING THE UNIT SAFELY......................................................................3 IMPORTANT NOTES ...............................................................................5 Main Features..........................................................................................9 Panel Descriptions.......................
Resumen del contenido incluido en la página 7
Contents Advanced Use .......................................................................................47 About the Edit Modes .................................................................................................................. 47 Basic Procedure ............................................................................................................................. 47 Settings That Are Saved for the Entire System ...............................................
Resumen del contenido incluido en la página 8
MEMO 8
Resumen del contenido incluido en la página 9
Main Features Organ Features Virtual Tonewheel Sound Generator The VK-8 features a Virtual Tonewheel sound generator that perfectly simulates the sound-production mechanism of traditional tone wheel organs. Since all parts — upper, lower, and pedal — are completely polyphonic, notes aren’t cut off regardless of your performance technique. Rotary Sound An effect algorithm using Roland’s COSM technology creates a faithful rotary speaker simulation that’s essential for a gre
Resumen del contenido incluido en la página 10
Panel Descriptions 1 2 3 4 5 6 7 8 25 26 2728 29 30 31 1. [MASTER VOLUME] knob 10. [AMPLIFIER] button Adjust the overall volume (p. 19). Switches the frequency response and cabinet resonance of the virtual amp (p. 33). ■ VIBRATO AND CHORUS 11. [TONE] knob 2. VIBRATO AND CHORUS [ON] button Adjust the tonal character of the organ voice (p. 33). Switches the vibrato or chorus effect on/off (p. 31). ■ REVERB 3. [VIBRATO AND CHORUS] knob 12
Resumen del contenido incluido en la página 11
Panel Descriptions POWER SWITCH LOCATED ON THE REAR PANEL 9 10 11 12 13 14 15 18 19 20 21 22 23 POWER SWITCH LOCATED ON THE REAR PANEL 24 16 17 19. [1]–[8] button ■ HARMONIC BAR PART When the [PRESET] button’s indicator is lit, the [1]–[8] These buttons select the part whose settings the buttons will switch presets. When the [PRESET] harmonic bars will affect. button’s indicator is dark, the [1]–[8] buttons will switch 26. [PEDAL] button OTHER TONES. When the harmonic bars are moved, the sou
Resumen del contenido incluido en la página 12
Panel Descriptions 32 33 34 35 3637 3839 40 4142 43 REAR PANEL 39. CONTROL PEDAL jack Accepts connection of a pedal switch or expression 32. [POWER] switch pedal. The desired function can be assigned to the pedal Turn the power on/off (p. 19). (p. 18, p. 40). 33. AC Inlet 40. OUTPUT R jack Connect the included power cable to this inlet (p. 16). 41. OUTPUT L (MONO) jack 34. MIDI KEYBOARD IN connector An amp, powered speakers, etc., can be connected here. An external keyboard can be connected
Resumen del contenido incluido en la página 13
How the VK-8 Works About the Virtual Tonewheel Sound Generator A traditional tone wheel organ produces the sound by 91 toothed wheels called “tone wheels.” Each tone wheel produces a different pitch. A motor is used to rotate these tone wheels past electromagnetic coils, and as the teeth of each wheel pass by the corresponding electromagnetic coil, an audio signal is generated. The combination of harmonic bars and the notes that are pressed then select the audio signals that are output, prod
Resumen del contenido incluido en la página 14
How the VK-8 Works Vibrato and Chorus Traditional tone wheel organs provided a total of six different effects: three kinds of vibrato (V1, V2, V3) and three kinds of chorus (C1, C2, C3). Vibrato is an effect that cyclically modulates the pitch, and chorus is an effect that modulates the pitch to produce spaciousness and depth. Harmonic bars The harmonic bars of a tone wheel organ are arranged in ascending order of pitch, from left to right. Borrowing some inspiration from the pipes of a pipe
Resumen del contenido incluido en la página 15
How the VK-8 Works About the Memories System memory Settings that affect the entire VK-8 are referred to as “system memory.” Preset memory Settings that are stored independently for each preset number, such as harmonic bar and panel settings, are called “preset memory.” There are a total of 64 preset memories, and each of them can be edited. 15
Resumen del contenido incluido en la página 16
Before You Begin Playing NOTE Connecting the Power Cord To prevent malfunction and/ or damage to speakers or other 1 Before making a connection, make sure that the VK-8 is turned off. devices, always turn down the volume, and turn off the 2 Connect supplied power cable to the VK-8, and plug the other end into a power on all devices before making any connections. power outlet. fig.01-01 AC Outlet NOTE Be sure to use the supplied power cable. AC Inlet 16
Resumen del contenido incluido en la página 17
Before You Begin Playing NOTE Connecting Your Amp, Speakers, or To prevent malfunction and/ Headphones or damage to speakers or other devices, always turn down the The VK-8 is not equipped with an amplifier or speakers. In order to hear the sound, volume, and turn off the you will need to connect audio equipment such as a monitor speaker system or power on all devices before stereo set, or use headphones. making any connections. 1 Before making any connections, make sure that all the devi
Resumen del contenido incluido en la página 18
Before You Begin Playing Connecting the Pedal Keyboard 1 Before making any connections, make sure that all the devices are turned If the SUB KEYBOARD FUNCTION (p. 58) is turned off. on, it will not be necessary to specify the MIDI channel. 2 Use a commercially available MIDI cable to connect the VK-8’s MIDI PEDAL IN connector to the MIDI OUT connector of your MIDI pedal keyboard unit. fig.01-05 PEDAL IN NOTE The power switch of your MIDI pedal keyboard unit MIDI OUT must be turned on befo
Resumen del contenido incluido en la página 19
Before You Begin Playing NOTE Turning the Power On Once the connections have been completed, turn on power to your various devices 1 Before turning on the VK-8’s power, make sure that: in the order specified. By • The VK-8 is correctly connected to the desired peripheral devices. turning on devices in the wrong order, you risk causing • The volume of the VK-8 and any connected audio equipment or malfunction and/or damage to speakers is turned to the minimum position. speakers and other d
Resumen del contenido incluido en la página 20
Before You Begin Playing NOTE Restoring the Factory Settings (Factory When you perform the Factory Reset) Reset operation, all the data you created will be lost from This function resets all the VK-8’s settings to their factory default values. the VK-8’s internal memory. If the VK-8 contains important data that you wish to keep, use 1 Make sure that the volume is turned to the minimum position. the Bulk Dump operation to save the data on an external 2 Press the lower portion of the VK-8
