Manual de instrucciones de Ciprico DIMEDA 10G

Resumen del contenido incluido en la página 1

For detailed instructions, refer to online help or the
Software User Guide (Part No. 21022081). Ciprico
DiMeda 10G
manuals are available at: www.ciprico.com>
Customer Support> Tech Pub Library.
Getting Started
Step 1. Unpack Appliance Step 3. Open DiMeda Software on Workstation
Unpack DiMeda. Move it to the place of operation. Warning: DiMeda is a. From any network machine, recognize DiMeda by adding an IP
address within the subnet range of 172.31.0.0.
heavy; use care in lifting it. Save pac

Resumen del contenido incluido en la página 2

Step 9. Configure SMTP LCD Display Simple Mail Transfer Protocol (SMTP) notifies an administrator via The liquid crystal display (LCD) panel enables you to enter commands. e-mail when an event occurs in the DiMeda system. To disable SMTP, Use the arrow, F1, F2, and Enter buttons to view status or enter leave the window blank and click on the Next icon. To enable SMTP, click commands. in the Enable box and do the following: a. Enter the IP address of the mail server. b. Remove a contact by cli