Resumen del contenido incluido en la página 1
Part No. 060191-10, Rev. B
April 2004
®
OmniStack 6300-24
Users Guide
Resumen del contenido incluido en la página 2
An Alcatel service agreement brings your company the assurance of 7x24 no-excuses technical support. You’ll also receive regular software updates to maintain and maximize your Alcatel product’s features and functionality and on-site hardware replacement through our global network of highly qualified service delivery partners. Additionally, with 24-hour-a-day access to Alcatel’s Service and Support web page, you’ll be able to view and update any case (open or closed) that you have reported t
Resumen del contenido incluido en la página 3
Warning This equipment has been tested and found to comply with the limits for Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions in this guide, may cause interference to radio communications. Operat
Resumen del contenido incluido en la página 4
Resumen del contenido incluido en la página 5
Contents Chapter 1: Introduction 1-1 Key Features 1-1 Description of Software Features 1-2 System Defaults 1-5 Chapter 2: Initial Configuration 2-1 Connecting to the Switch 2-1 Configuration Options 2-1 Required Connections 2-2 Remote Connections 2-3 Basic Configuration 2-3 Console Connection 2-3 Setting Passwords 2-4 Setting an IP Address 2-4 Manual Configuration 2-4 Dynamic Configuration 2-5 Enabling SNMP Management Access 2-6 Community Strings 2-6 Trap Receivers 2-7 Saving Configuration Se
Resumen del contenido incluido en la página 6
Contents Telnet Settings 3-21 Configuring Event Logging 3-23 System Logs 3-23 System Logs Configuration 3-24 Remote Logs Configuration 3-25 Sending Simple Mail Transfer Protocol Alerts 3-27 Resetting the System 3-29 Setting the System Clock 3-29 Configuring SNTP 3-30 Setting the Time Zone 3-31 Simple Network Management Protocol 3-31 Enabling SNMP 3-33 Setting Community Access Strings 3-33 Specifying Trap Managers and Trap Types 3-34 Configuring SNMPv3 Management Access 3-35 Setting an Engine I
Resumen del contenido incluido en la página 7
Contents Port Configuration 3-75 Displaying Connection Status 3-75 Configuring Interface Connections 3-77 Creating Trunk Groups 3-79 Statically Configuring a Trunk 3-80 Enabling LACP on Selected Ports 3-81 Configuring LACP Parameters 3-83 Displaying LACP Port Counters 3-85 Displaying LACP Settings and Status for the Local Side 3-86 Displaying LACP Settings and Status for the Remote Side 3-88 Setting Broadcast Storm Thresholds 3-90 Configuring Port Mirroring 3-91 Configuring Rate Limits 3-92 Show
Resumen del contenido incluido en la página 8
Contents Mapping Protocols to VLANs 3-137 Class of Service Configuration 3-139 Setting the Default Priority for Interfaces 3-139 Mapping CoS Values to Egress Queues 3-141 Selecting the Queue Mode 3-143 Setting the Service Weight for Traffic Classes 3-143 Mapping Layer 3/4 Priorities to CoS Values 3-145 Selecting IP Precedence/DSCP Priority 3-145 Mapping IP Precedence 3-146 Mapping DSCP Priority 3-147 Mapping IP Port Priority 3-149 Mapping CoS Values to ACLs 3-150 Changing Priorities Based on ACL
Resumen del contenido incluido en la página 9
Contents Understanding Command Modes 4-5 Exec Commands 4-6 Configuration Commands 4-6 Command Line Processing 4-7 Command Groups 4-9 Line Commands 4-10 line 4-10 login 4-11 password 4-12 timeout login response 4-13 exec-timeout 4-14 password-thresh 4-14 silent-time 4-15 databits 4-16 parity 4-16 speed 4-17 stopbits 4-17 disconnect 4-18 show line 4-18 General Commands 4-19 enable 4-19 disable 4-20 configure 4-20 show history 4-21 reload 4-22 end 4-22 exit 4-22 quit 4-23 System Management Commands
Resumen del contenido incluido en la página 10
Contents ip ssh timeout 4-35 ip ssh authentication-retries 4-36 ip ssh server-key size 4-36 delete public-key 4-37 ip ssh crypto host-key generate 4-37 ip ssh crypto zeroize 4-38 ip ssh save host-key 4-38 show ip ssh 4-39 show ssh 4-39 show public-key 4-40 Event Logging Commands 4-41 logging on 4-41 logging history 4-42 logging host 4-43 logging facility 4-43 logging trap 4-44 clear logging 4-44 show logging 4-45 SMTP Alert Commands 4-46 logging sendmail host 4-47 logging sendmail level 4-47 lo
Resumen del contenido incluido en la página 11
Contents whichboot 4-66 boot system 4-66 Authentication Commands 4-67 Authentication Sequence 4-67 authentication login 4-68 authentication enable 4-69 RADIUS Client 4-70 radius-server host 4-70 radius-server port 4-70 radius-server key 4-71 radius-server retransmit 4-71 radius-server timeout 4-72 show radius-server 4-72 TACACS+ Client 4-73 tacacs-server host 4-73 tacacs-server port 4-73 tacacs-server key 4-74 show tacacs-server 4-74 Port Security Commands 4-75 port security 4-75 802.1x Port Aut
Resumen del contenido incluido en la página 12
Contents match access-list ip 4-96 show marking 4-97 MAC ACLs 4-98 access-list mac 4-98 permit, deny (MAC ACL) 4-99 show mac access-list 4-100 access-list mac mask-precedence 4-101 mask (MAC ACL) 4-102 show access-list mac mask-precedence 4-104 mac access-group 4-104 show mac access-group 4-105 map access-list mac 4-105 show map access-list mac 4-106 match access-list mac 4-106 ACL Information 4-107 show access-list 4-107 show access-group 4-108 SNMP Commands 4-108 snmp-server community 4-109
Resumen del contenido incluido en la página 13
Contents show dns 4-127 show dns cache 4-128 clear dns cache 4-128 Interface Commands 4-129 interface 4-130 description 4-131 speed-duplex 4-131 negotiation 4-132 capabilities 4-133 flowcontrol 4-134 combo-forced-mode 4-135 shutdown 4-135 switchport broadcast packet-rate 4-136 clear counters 4-137 show interfaces status 4-138 show interfaces counters 4-139 show interfaces switchport 4-140 Mirror Port Commands 4-141 port monitor 4-141 show port monitor 4-142 AMAP Configuration 4-143 amap enable 4
Resumen del contenido incluido en la página 14
Contents spanning-tree forward-time 4-163 spanning-tree hello-time 4-164 spanning-tree max-age 4-164 spanning-tree priority 4-165 spanning-tree pathcost method 4-166 spanning-tree transmission-limit 4-166 spanning-tree mst-configuration 4-167 mst vlan 4-167 mst priority 4-168 name 4-169 revision 4-169 max-hops 4-170 spanning-tree spanning-disabled 4-171 spanning-tree cost 4-171 spanning-tree port-priority 4-172 spanning-tree edge-port 4-172 spanning-tree portfast 4-173 spanning-tree link-type 4-
Resumen del contenido incluido en la página 15
Contents GVRP and Bridge Extension Commands 4-192 bridge-ext gvrp 4-193 show bridge-ext 4-193 switchport gvrp 4-194 show gvrp configuration 4-194 garp timer 4-195 show garp timer 4-196 Priority Commands 4-197 Priority Commands (Layer 2) 4-197 switchport priority default 4-197 queue mode 4-198 queue bandwidth 4-199 queue cos-map 4-200 show queue mode 4-201 show queue bandwidth 4-201 show queue cos-map 4-202 Priority Commands (Layer 3 and 4) 4-202 map ip port (Global Configuration) 4-203 map ip
Resumen del contenido incluido en la página 16
Contents IGMP Query Commands (Layer 2) 4-222 ip igmp snooping querier 4-222 ip igmp snooping query-count 4-222 ip igmp snooping query-interval 4-223 ip igmp snooping query-max-response-time 4-224 ip igmp snooping router-port-expire-time 4-224 Static Multicast Routing Commands 4-225 ip igmp snooping vlan mrouter 4-225 show ip igmp snooping mrouter 4-226 IP Interface Commands 4-227 Basic IP Configuration 4-227 ip address 4-227 ip default-gateway 4-228 ip dhcp restart 4-229 show ip interface 4-22
Resumen del contenido incluido en la página 17
Tables Table 1-1. Key Features 1-1 Table 1-2. System Defaults 1-5 Table 3-4. Main Menu 3-3 Table 3-2. Configuration Options 3-3 Table 3-1. SNMPv3 Security Models and Levels 3-32 Table 3-22. Compatible Operating Systems 3-45 Table 3-30. 802.1X Statistics 3-59 Table 3-45. LACP Port Counters Information 3-85 Table 3-47. LACP Settings - Local Side 3-86 Table 3-49. LACP Settings - Remote Side 3-88 Table 3-54. Displaying Port Statistics 3-94 Table 3-85. Mapping CoS Values to Egress Queues 3-141 Table
Resumen del contenido incluido en la página 18
Tables Table 4-27. Authentication Sequence 4-67 Table 4-28. RADIUS Commands 4-70 Table 4-29. TACACS+ Commands 4-73 Table 4-30. Port Security Commands 4-75 Table 4-31. 802.1X Port Authentication Commands 4-76 Table 4-32. ACL Information 4-84 Table 4-33. IP ACLs 4-85 Table 4-34. Priority Queue Mapping 4-95 Table 4-35. MAC ACLs 4-98 Table 4-36. Priority Queue Mapping 4-105 Table 4-37. ACL Information 4-107 Table 4-38. SNMP Commands 4-108 Table 4-1. SNMP Engine ID 4-115 Table 4-2. SNMP View 4-116 Ta
Resumen del contenido incluido en la página 19
Table 4-67. Quality of Service Commands 4-210 Table 4-68. Multicast Filtering Commands 4-218 Table 4-69. IGMP Snooping Commands 4-218 Table 4-70. IGMP Query Commands (Layer 2) 4-222 Table 4-71. Static Multicast Routing Commands 4-225 Table 4-72. IP Configuration 4-227 Table B-1. Troubleshooting Chart B-1 xix
Resumen del contenido incluido en la página 20
Tables xx
