Resumen del contenido incluido en la página 1
Operation/Reference Guide
NXR-ZGW/-ZRP
NetLinx ZigBee Compatible Gateway
and Repeater
Last updated: 7/30/2008
Control System Accessories
Resumen del contenido incluido en la página 2
AMX Limited Warranty and Disclaimer AMX warrants its products to be free of defects in material and workmanship under normal use for three (3) years from the date of purchase from AMX, with the following exceptions: • Electroluminescent and LCD Control Panels are warranted for three (3) years, except for the display and touch overlay components that are warranted for a period of one (1) year. � Disk drive mechanisms, pan/tilt heads, power supplies, and MX Series products are warranted for a pe
Resumen del contenido incluido en la página 3
Software License and Warranty Agreement LICENSE GRANT. AMX grants to Licensee the non-exclusive right to use the AMX Software in the manner described in this License. The AMX Software is licensed, not sold. This license does not grant Licensee the right to create derivative works of the AMX Software. The AMX Software consists of generally available programming and development software, product documentation, sample applications, tools and utilities, and miscellaneous technical information. P
Resumen del contenido incluido en la página 4
Resumen del contenido incluido en la página 5
Table of Contents Table of Contents Overview ............................................................................................................1 NXR-ZGW Specifications........................................................................................... 1 NXR-ZRP Specifications ............................................................................................ 3 How ZigBee works...............................................................................................
Resumen del contenido incluido en la página 6
Table of Contents Network ........................................................................................................................ 19 Enabling and disabling the wireless network ................................................................ 19 Connecting an NXR-ZRP to the network for the first time ............................................ 19 Setting the PAN channel ............................................................................................... 20 Connecting
Resumen del contenido incluido en la página 7
Overview Overview The NXR-ZGW (FG5791-01) is an Ethernet to ZigBee wireless gateway. The NXR-ZGW features a 10BaseT, half duplex Ethernet port capable of Power over Ethernet (PoE), 16 Mbytes of Flash, 16 Mbytes of SDRAM, and a ZigBee module, and is controlled via a web server interface. The NXR-ZRP (FG5791-02) is a ZigBee wireless repeater that features 16 Mbytes of Flash, 16 Mbytes of SDRAM, and a ZigBee module. NXR-ZGW Specifications The following table outlines the specifications for the
Resumen del contenido incluido en la página 8
Overview NXR-ZGW (FG5791-01) Specifications (Cont.) Rear Components: Power connector Two power options are available: � 2-pin 3.5mm Phoenix connector � Power Over Ethernet (PoE) - powers the device through the CAT5 cable. Both Power and Data can be transmitted simultaneous through the CAT5 cable when using the appropriate equipment. Ethernet port 10BaseT modular (RJ-45) connector - used to connect the NXR-ZGW to your LAN and/or to connect your third party device to the LAN when the NXR- ZGW
Resumen del contenido incluido en la página 9
Overview NXR-ZRP Specifications The following table outlines the specifications for the NXR-ZRP. NXR-ZRP (FG5791-02) Specifications Dimensions (HWD): � 906 x 2.500 x 3.424 (23.01 mm x 63.50 mm x 86.96 mm) depth does not include antenna Weight: � 0.25 lbs (113.39g) Power: 10.5 - 18 VDC; 13.5 (nominal operation voltage) Memory: � 16 Mbytes of Flash � 1 Megabit external memory Radio Specifications: Frequency IEEE 802.15.4 Operating channels � 11 - 26 Modulation technique �DSS Output power � Re
Resumen del contenido incluido en la página 10
Overview NXR-ZRP (FG5791-02) Specifications (Cont.) Other AMX Products: � Mio Modero R-3 Remote (FG148-03) � Mio Modern R-4 Remote (FG148-04) � NXR-ZGW NetLinx ZigBee Gateway (FG5791-01) � NXA-WAP 2403A 3 dBI Antenna (FG2255-20) � NXA-WAP 2405A 5.5 dBI Antenna (FG2255-21) � NXA-WAP 2413A Mounting Bracket (FG2255-24) Connection LEDs Reset Button PWR/STATUS ICSP RF ANT RESET (Front) Antenna Mount 2-pin 3.5mm Phoenix 12VDC power connector PWR (Rear) FIG. 2 Front and Rear Components of the NXR-ZRP
Resumen del contenido incluido en la página 11
Overview How ZigBee works The ZigBee wireless personal network technology protocol provides a framework for reliable, cost- effective, low-power, wireless networked, monitoring and control products based on an open global standard. (More information on the ZigBee standard is available at http://www.zigbee.org.) Many ZigBee-enabled devices use ZigBee exclusively as a communication and control interface, but not all: some have the option of switching between ZigBee, standard IR, or a combinatio
Resumen del contenido incluido en la página 12
Overview Mesh Network Arrangements The following installations depend upon the criteria for the network. A home installation would perhaps only need one NXR-ZGW or PAN ID where a commercial installation might require a NXR-ZGW and several NXR-ZRPs. When adding a ZigBee network to a NetLinx master, an Ethernet switch or hub must be added to the master for proper function of the ZigBee network. Single PAN ID installations After you have installed the NXR-ZGW, you should consider the arrangement
Resumen del contenido incluido en la página 13
Overview 1 hop NXR-ZGW (Coordinator) NetLinx Master CAT5 Ethernet Mio R-4 Mio R-4 connection PAN ID 1 1 hop 2 hops 3 hops NXR-ZGW (Coordinator) NetLinx Master NXR-ZRP NXR-ZRP (Router) (Router) Mio R-4 Mio R-4 Mio R-4 Mio R-4 Mio R-4 Mio R-4 CAT5 Ethernet connection PAN ID 2 FIG. 4 Multiple PAN ID Network FCC Compliance This device complies with Part 15 of the FCC rules. Subject to the following two conditions: 1. This device must not cause harmful interference and 2. This device must accept al
Resumen del contenido incluido en la página 14
Overview 8 NXR-ZGW/-ZRP
Resumen del contenido incluido en la página 15
Installation Installation Things to Consider Before Starting Several factors will help decide the best place to install NXR-ZGW and NXR-ZRP devices. Before installing, consider the following: Location and Antenna Direction The best location for NXR-ZGW and NXR-ZRP devices are usually in the center of your wireless network, with line of sight to all of your mobile devices. Try to place the antenna in a position that can best cover your wireless network. Normally, the higher you place the anten
Resumen del contenido incluido en la página 16
Installation Connecting the Optional Accessory Antennas Several accessory 2.4GHz antennas are available for use with NXR-ZGW and NXR-ZRP devices. Each of these antennas is uniquely suited to meet a wide variety of installation requirements. Determining the Power Source Based upon location and the availability of electricity, select one of the two following methods for power: 2-pin 3.5mm captive-wire connector - Prepare the captive wire pair and insert it into the connector. See Preparing cap
Resumen del contenido incluido en la página 17
Installation Using the PSN NetLinx connector for power The PWR and GND cable from the 12 VDC power supply must be connected to the corresponding location on the 2-pin 3.5 mm mini-captive wire connector (FIG. 6). PWR + 12 VDC Power Supply GND - To the Device FIG. 6 12 VDC Power Connector Wiring Diagram 1. Insert the PWR and GND wires on the terminal end of a PSN 2-pin 3.5 mm mini-captive wire cable. Match the wiring locations of the +/- on both the power supply and the terminal connector.
Resumen del contenido incluido en la página 18
Installation 12 NXR-ZGW/-ZRP
Resumen del contenido incluido en la página 19
Setting up a Network Setting up a Network After you have established the location of the gateway (page 9), connected it (page 10), provided power (page 10), and placed the device in either a rack(page 11) or wall installation (page 11) you can then begin configuring the NXR-ZGW and adding an NXR-ZRP and ZigBee-compatible devices to the network. 1. Confirm the NXR-ZGW is receiving power by checking the PWR LED (See “Front and Rear Components of the NXR-ZGW” on page 2.). 2. Using a PC connecte
Resumen del contenido incluido en la página 20
Setting up a Network 14 NXR-ZGW/-ZRP
