Resumen del contenido incluido en la página 1
EUB-9701 EXT2
Wireless-N USB 2.0 Adapter
(802.11n draft, 802.11g & 802.11b)
User Manual
Version: 1.3
1
Resumen del contenido incluido en la página 2
TABLE OF CONTENTS 1 INTRODUCTION.................................................................................................................................4 2 FEATURES............................................................................................................................................4 3 PACKAGE CONTENTS.......................................................................................................................5 4 SYSTEM REQUIREMENTS.....
Resumen del contenido incluido en la página 3
Revision History Version Date Notes 1.1 May 24, 2007 Created 1.2 June 4, 2007 Updated setup pages 1.3 June 9, 2007 Modified Config pages & Screenshots 3
Resumen del contenido incluido en la página 4
1 Introduction EnGenius Wireless-N USB Adapter (EUB-9701 EXT2) implements the latest 11n (Draft 2.0) technology which extremely improves wireless signal for your computer than existing wireless 802.11g technology. The incredible speed of Wireless-N USB adaptor makes heavy traffic networking activities more flexible and takes the wireless into practical road. You could enjoy the racing speed of wireless connection, surf Internet without string of wires. Adding EnGenius Wireless-N to y
Resumen del contenido incluido en la página 5
EUB-9701 Wireless N USB adapter Version 1.3 * Theoretical wireless signal rate based on IEEE standard of 802.11a, b, g chipset used. Actual throughput may vary. Network conditions and environmental factors lower actual throughput rate. ** All specifications are subject to change without notice. 3 Package Contents Open the package carefully, and make sure that none of the items listed below are missing. Do not discard the packing materials, in case of
Resumen del contenido incluido en la página 6
EUB-9701 Wireless N USB adapter Version 1.3 4 System Requirements To begin using the WLAN USB Adapter, your PC/Notebook must meet the following minimum requirements: Operating System – Microsoft Windows XP/2000 USB 2.0 socket x 1 (free to use socket) 256MB system memory or larger 750MHz CPU or higher configuration 5 Installation Insert the support CD into your optical drive. In the CD drive folder, you will see the following file.
Resumen del contenido incluido en la página 7
EUB-9701 Wireless N USB adapter Version 1.3 Await instructions as you see the setup progress as shown below... Click finish to restart PC/notebook. 7
Resumen del contenido incluido en la página 8
EUB-9701 Wireless N USB adapter Version 1.3 Please insert EUB-9701 EXT2 Wireless Network Adapter with the USB cable in your notebook/PC’s available USB 2.0 socket After a few seconds a notification that setup is complete will show up as follows. Click Finish to restart the PC/notebook. 8
Resumen del contenido incluido en la página 9
EUB-9701 Wireless N USB adapter Version 1.3 6 Verify installation 1. Open [Control Panel] =>Double-click [System]. 2. Select [Hardware] tab=>Click [Device Manager]. Select and double-click [802.11N USB wireless LAN card] Verify that the device status of [802.11N USB wireless LAN card] 9
Resumen del contenido incluido en la página 10
EUB-9701 Wireless N USB adapter Version 1.3 [This device is working properly]->Click [OK] 7 Setup Network Configuration (MS WinXP) • Enter [Start Menu] =>select [Control panel] =>select [Network]. • Right-click [Wireless Network] • Select [Local Area Connection]) icon=>select [properties] • Select [Internet Protocol (TCP/IP)] =>Click [Properties]. 10
Resumen del contenido incluido en la página 11
EUB-9701 Wireless N USB adapter Version 1.3 • Select the [General] tab. a. If your Wireless Router supports [DHCP] function, please select both [Obtain an IP address automatically] and [Obtain DNS server address automatically]. b. If the router does not support [DHCP] function, you have to configure the IP and DNS settings. 11
Resumen del contenido incluido en la página 12
EUB-9701 Wireless N USB adapter Version 1.3 8 Setup WLAN (EnGenius Config-Utility) Prerequisite: 1. Your home/office environment should have a wireless LAN Access Point (AP) that is available for your use. 2. You should readily have the (security keys) to connect those Wireless LAN Access Points (AP) Configuration utility will first automatically link with the Wireless AP if there is no security key required. If the connection is successful, a mes
Resumen del contenido incluido en la página 13
EUB-9701 Wireless N USB adapter Version 1.3 Click on Launch Config Utilities. Notice it has many tabs for configuration To make connection, select one AP/SSID (eg: NKSP) and click [Connect]. When the connection works, [Connected] will appear in the left button of this tab and the icon appears in front of the linked AP. When the connection failed, [Disconnected] will appear. If the AP has set up the encryption, please setup the same before you click
Resumen del contenido incluido en la página 14
EUB-9701 Wireless N USB adapter Version 1.3 If there is security key required, obtain it and click connect. If you need to input a security key, refer to chapter 9 to understand setting up WEP key. 9 Setup Network security (WEP, WPA…) If your AP/Router has network security key, your wireless adapter needs to have the same security setting. The details of network security setting are described below. Please open EnGenius Wireless Utility before you sta
Resumen del contenido incluido en la página 15
EUB-9701 Wireless N USB adapter Version 1.3 Follow steps below: a. [Authentication Type]: indicates the authentication type of the AP/Router. Please confirm the setting of the AP/Router. ＊ [Open]: WEP open system is based on request and grant. It is essentially no authentication. ＊ [Shared]: WEP shared key is based on request, challenge, challenge response, grant/deny. b. Select [WEP] in [Encryption]. c. Key in AP encryption keys (64/128bits) i
Resumen del contenido incluido en la página 16
EUB-9701 Wireless N USB adapter Version 1.3 Setting the [Authentication and Security] Page: a. Authentication Type: Select [WPA-PSK] or [WPA2-PSK] (AP must support the function). b. Encryption: Select [TKIP] or [AES].(Same as AP) c. Enter the selected AP’s password in [WAP Preshared Key] box and click [OK]. WPA and WPA2 16
Resumen del contenido incluido en la página 17
EUB-9701 Wireless N USB adapter Version 1.3 1. Select an AP with [WPA] or [WPA2] authentication and press [Connect]. Here we use OFFICE for example; hence the following settings must correspond with your corresponding Wireless Access Point. Setting the [Authentication and Security] Page: a. Authentication Type: select [WPA] or [WPA2-PSK] (AP must support the function). b. Encryption: select [TKIP] or [AES] (Same as AP) 17
Resumen del contenido incluido en la página 18
EUB-9701 Wireless N USB adapter Version 1.3 c. If the AP/router has [802.1x Setting] function, click it for advanced settings. Please consult your network administrator for details or check the user manual of the Wireless Access Point. Click [OK] to finish setting. 10 Adding Profiles 1. Select one AP in the SSID column, eg: EnGenius=>Click [Add to Profile] and the page shown below will appear. 18
Resumen del contenido incluido en la página 19
EUB-9701 Wireless N USB adapter Version 1.3 2. Setting items in the [configuration] tab: • Profile Name: Enter the connected AP profile, eg: PROF1. • SSID: Click the drop-down menu and select one AP. You can also enter the AP manually. • PSM: When CAM is selected, indicates that the product is not in power saving status. When PSM is selected, the product is in power saving status. (Only select it under Infrastructure network type). • Network Type: [
Resumen del contenido incluido en la página 20
EUB-9701 Wireless N USB adapter Version 1.3 • [Add]: Click [Add] to add a new profile. • [Delete]: to delete a profile, select one profile name and click [Delete]. • [Edit]: to edit the setting of a profile, select the profile and click [Edit]. • [Activate]: to activate the selected profile, select the profile and click [Activate]. 11 WPS Configuration Wi-Fi Protected Setup (WPS) configuration function - provides easy procedures to set up wirel
