Manual de instrucciones de Golden Technologies AWLL5077

Resumen del contenido incluido en la página 1

Windows XP/2000 Users:
Ver. 1.0


Quick Installation Guide

Golden 150 Wireless Mini USB Adapter

Model # AWLL5077

Package Contents:

• Golden 150 Wireless Mini
USB Adapter
• Driver & Utility CD
• Quick Installation Guide


Windows Vista Users:




Section 1


Install the Wireless USB Adapter

This Quick Installation Guide only provides the basic installation instructions.
For detailed instructions of other advanced features, please refer to the User’s
M

Resumen del contenido incluido en la página 2

Step 1.5 Click Install to start the installation. Note: If the Autorun screen doesn’t appear automatically, go to Start, Run, and type D:\Utility\Setup.exe (where D is the letter of your CD drive) and click OK. Step 1.6 For Windows XP, click on Continue Anyway. Windows Vista Users: When you get warning message(s), make sure that you give permission to continue with the installation of the driver software. Step 1.4 The Airlink101 WLAN Monitor screen will popup. Click Next at

Resumen del contenido incluido en la página 3

Step 1.7 Click Finish to complete the installation. For Windows Vista: click on Install this driver software anyway. Step 1.8 Select Yes, I will restart my computer now. Click Finish to complete the installation. Please wait when Windows is installing the driver for Airlink101 Wireless Adapter and the utility, Airlink101 Wireless Monitor. The driver and utility have been installed. Please continue to Section 2.

Resumen del contenido incluido en la página 4

Section 2 Connect to Wireless Network For Windows 7 Users: You will need to use the utility built in Windows 7 to manage this wireless USB adapter. Currently, Airlink101 Wireless Monitor does not support Windows 7. Step 2.1 Click on the wireless icon in the system tray at the bottom right-hand corner of your screen. A list of available network will pop up. Select the one you want to connect to and click Connect. For Windows Vista/XP/2000 Users: Step 2.1 Open the Air

Resumen del contenido incluido en la página 5

Step 2.2 The Easy Setup Button (Wi-Fi Protected Setup) is a new and easy way to configure the encryption for your wireless network clients. In order to use it, you need to have a router that supports this feature. Note: If your router doesn’t support Easy Setup Button function (Wi-Fi Protected Setup), please go to Step 2.3. 1. Push the Easy Setup Button of the Adapter until you see the following window pops up on the monitor. 3. The router will now start to synchronize the e

Resumen del contenido incluido en la página 6

If the network that you are attempting to connect does not have encryption enabled, you will receive a warning about connecting to an unsecured network. Click OK to complete the connection. Go to Step 2.5. Step 2.4 Enter the wireless security key into the Network Key and Confirm Network Key boxes. Click OK. Congratulations! You have now connected to the wireless network successfully. The wireless adapter will automatically detect the type of Network Authentication and

Resumen del contenido incluido en la página 7

Troubleshooting 1. If you cannot open the wireless monitor utility, make sure that the USB adapter is inserted firmly into the USB port. 2. If you cannot connect to the wireless router, you may want to double check the wireless security settings on the router. The network key you entered in Step 2.4 must match with the settings on the wireless router. 3. If you are experiencing problems with the connection such as low signal strength, slow connection speed, or unstable wirele