Resumen del contenido incluido en la página 1
Introduction
Hypertec ISDN 10T Router
USER'S MANUAL
Information in this document is subject to change without
notice. All rights reserved. All brand names are registered
trademarks of their respective companies.
1
Resumen del contenido incluido en la página 2
Introduction WARNING This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Para. 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in
Resumen del contenido incluido en la página 3
Introduction Contents Contents 3 1 INTRODUCTION 1-1 About this Manual 1-4 2 INSTALLATION 2-1 General 2-1 Hardware Installation 2-1 Software Installation 2-3 Installing EasyWeb 2-4 3. Concepts and Principles of Operation 3-1 ISDN Overview 3-1 Data Communication Services 3-3 Voice Communication Service 3-15 Basic Rate ISDN Provisioning for United States and Canada 3-15 4. Configuration and Management 4-1 Introduction 4-1 NMS 4-2 Monitoring Status with ClearMon. 4-40 Managing the HyperRoute from a
Resumen del contenido incluido en la página 4
Introduction INTRODUCTION The Hypertec ISDN 10T Router is a compact router/bridge designed for small office and home applications by providing a consolidated data and voice link to Internet, Intranet, and the telephone network over a single ISDN line. Figure 0-1 The Hypertec ISDN 10T Router The Hypertec ISDN 10T Router provides an ideal means of connecting a local area network consisting of Ethernet stations to the Internet through a local Internet Service Provider (ISP) and using conventiona
Resumen del contenido incluido en la página 5
Introduction A schematic of how the Hypertec ISDN Router is used is shown in Figure 0-2 A Hypertec ISDN Router Application. Figure 0-2 A Hypertec ISDN Router Application The Hypertec ISDN Routersupports the following features: ISDN • U or ST interfaces • Switched ISDN service for various switches worldwide : National ISDN, ATT 5ESS, DMS switches in North America EuroISDN(ETSI) switches in Europe NTT switches in Japan EuroISDN switches in Taiwan, Singapore ATT 5ESS switches in Korea • Detail
Resumen del contenido incluido en la página 6
Introduction Security • CLID (caller ID) • Call-Back (hang-up and dial the caller) • PAP/CHAP ( PPP authentication protocol) • Access List (filtering of packets bases upon IP address) • NAT (network address translation). Hides internal IP addresses from outside world, no need to change existing IP address assignments, allows the subscription of single IP address account for the entire LAN. Network Management • From local console, NMS/SNMP or Web Browser/HTTP • NMS runs on Windows 3.1, Windows95
Resumen del contenido incluido en la página 7
Introduction About this Manual Chapter 2, Installation. This chapter provides details of how to install the Hypertec ISDN Router hardware and software. Guidance is provided about the ISDN line that is required from your telephone company and the personal computer requirements to use the Network Management System software. Chapter 3, Concepts and Principles of Operation. This chapter covers the concepts and principles of operation of three major topics : ISDN, Data Services, and voice services.
Resumen del contenido incluido en la página 8
Installation INSTALLATION General The Hypertec ISDN 10T Router is shipped in a box, which contains the following items: • The Hypertec ISDN 10T Router • One Power Adapter with cable • One ISDN cable, 6 foot long with an RJ45 connector at each end • One data cable with a DB9 connector at each end • One changer DB9 (male) to DB25 (female) 1 • Two 3 / ” diskette containing the Hypertec ISDN 10T Router NMS software 2 1 • One 3 / ” diskette containing the Hypertec ISDN 10T Router EasyWeb software 2
Resumen del contenido incluido en la página 9
Installation 1. Determine the place where the Hypertec ISDN 10T Router is to reside, it is designed to rest on a flat level surface such as a desktop or table. Make sure that an AC power source and the ISDN termination are nearby. Connect the Ethernet LAN to any or all of the four RJ 45 ports labeled Ethernet using cables with RJ45 connectors. You may daisy-chain the Hypertec ISDN 10T Router embedded repeater to other external Ethernet hubs to accommodate more than 4 LAN users by using a cross
Resumen del contenido incluido en la página 10
Installation Software Installation The Hypertec ISDN 10T Router software diskettes contain two software packages, namely, NMS and EasyWeb. The Hypertec ISDN 10T Router Network Management System (NMS) is used to manage the Hypertec ISDN 10T Router from a Windows based PC equipped with a TCP/IP protocol stack. NMS communicates with the Hypertec ISDN 10T Router through Simple Network Management Protocol (SNMP) NMS consists of two applications, One is the SNMP management which is used to configure
Resumen del contenido incluido en la página 11
Installation Uninstalling NMS Under Window95/NT you can uninstall NMS by selecting Add/Remove Programs in the Start/Settings/Control Panel window. Select NMS from the list and click the Add/Remove button. Installing EasyWeb The procedure for installing EasyWeb depends upon whether your system has an installed HTTP server or not. Installing EasyWeb if there is NO installed HTTP server. 1. Select a Windows95/NT-based PC on the Ethernet network that is attached to the Hypertec ISDN 10T Router and t
Resumen del contenido incluido en la página 12
Installation Example using the Microsoft Personal web server on Win95. 1. Run the Microsoft Personal web server on Windows 95 2. Double click the icon on the right end of the task bar. A tagged Personal Web Server Properties) dialog box pops up. 3. Select the Administration page. 4. Press the Administration button to launch the default web browser on your system. 5. The Internet Services Administration web page is shown on the browser. Select WWW Administration to bring up the Internet Services
Resumen del contenido incluido en la página 13
Concepts and Principles of Operation Physical Interface The ISDN physical interface is a available in two types, U and S/T. The S/T interface relies on a external device called NT1 to connect the user equipment to the ISDN line. The S/T interface is used in most parts of the world. The U interface, widely used in North America, is designed for user equipment with built-in NT1. The NT1 (also called ISDN DSU) built-in ISDN device is also allowed In Japan. The Japanese U interface however works dif
Resumen del contenido incluido en la página 14
Concepts and Principles of Operation Directory numbers A directory number is the address or telephone number for the ISDN line assigned by your ISDN service provider or telephone company. The number of directory numbers allocated depends on which Service Provider you are using. If you are using an NI-1 line, you will be assigned one directory number per B- channel. Otherwise, you will be assigned one directory number per device. Service Profile Identifiers (SPIDs) Note: Service Profile Identifie
Resumen del contenido incluido en la página 15
Concepts and Principles of Operation Service type Number of channels DA64 One B-channel DA128 Two B channels Data Communication Services Two widely used inter-networking mechanisms are bridging and routing. Bridging offers a straightforward method of interconnecting network segments. Bridges are simple to use. However, if you are bridging across a WAN using ISDN, you can incur unnecessary costs from the ISDN bill. A more controllable way of moving data cross networks is by routing. For Internet
Resumen del contenido incluido en la página 16
Concepts and Principles of Operation Internet and Intranet Connection Profiles Hypertec ISDN 10T Router maintains two connection profiles one for Internet and the other for Intranet. The Internet connection by definition is for users to reach Internet, the Intranet connection is made between two offices. The Internet profile contains the configuration parameters required by the Internet connection. The categories available under Internet profile are : ISDN, PPP, IP, and NAT. The Intranet profil
Resumen del contenido incluido en la página 17
Concepts and Principles of Operation You can set Hypertec Router IP addresses to be 'un-numbered' or ‘numbered’. By setting it to “un- numbered”, you can route IP over a link between two devices without assigning IP addresses to the ISDN interfaces. This allows you to save valuable IP address space. There are situations where a traditional “numbered” IP address scheme is inevitable. In Figure 0-2, Unnumbered ISDN Link, there is an unnumbered link between an ISDN router and a remote router at the
Resumen del contenido incluido en la página 18
Concepts and Principles of Operation IPX IPX is the protocol used by Novel Netware as the network layer protocol. Novel IPX also uses Routing Information Protocol (RIP) for routing protocol. The IPX address consists of two parts: a 4- byte network number, and a 6- byte node number. Often, the node number is assigned as the Ethernet MAC address. In a bridging environment, all Netware clients and servers share the same external network number. In an IPX routing environment, networks connected by
Resumen del contenido incluido en la página 19
Concepts and Principles of Operation RIP Novel IPX also uses Routing Information Protocol (RIP) as a routing protocol. Although it is similarly named to the IP equivalent, it uses a different protocol. IPX RIP broadcasts packets to the network every 60 seconds to inform other IPX routers or servers about its network. Upon receiving an IPX RIP packet, a router adds one to the hop count of each router advertised and broadcasts a RIP packet to other networks it is connected to. SAP Netware Servers
Resumen del contenido incluido en la página 20
Concepts and Principles of Operation Hypertec ISDN 10T Router to negotiate for either PAP or CHAP authentication protocol whichever the remote end prefers. Multilink PPP The PPP Multilink Protocol (RFC 1717) is a standards based extension of the PPP (Point-to-Point Protocol) standard. It allows you to combine channels into a 'Multilink bundle' so that data can be sent at higher rates. Multilink PPP can implement a feature known as 'packet fragmentation' where larger individual packets are chop
