Manual de instrucciones de Airlink101 AP671W

Resumen del contenido incluido en la página 1

Package Contents



Before you begin the installation, please check the items of your package:

• Wireless N 300 Multi-Function Access Point
• Power Adapter
• Ethernet Cable (Cat.5)

• Setup CD
Quick Installation Guide
• Quick Installation Guide


Wireless N 300 Multi-Function Access Point

Section 1
with 5-Port Switch

This Quick Installation Guide only provides basic instructions. For detailed
Model # AP671W
information on using this product, please refer to the

Resumen del contenido incluido en la página 2

Step 2 Click Next to start the configuration. Step 4 Make sure the LEDs of POWER, WLAN and the LAN port that is connected to the Router are lit. If not, try the above steps again. LED Indicators: Light LED Description Status POWER On Router is powered on. On WPS setup is in progress. WLAN Off Wireless network is switched off. Wireless network is ready and WPS setup is Flashing not in progress. On LAN port is connected. Step 3 Connect one end of a network cable to a LAN por

Resumen del contenido incluido en la página 3

Step 6 Configure the IP Address for your Access Point for future Step 8 Configure the settings for the operation mode you have selected. management use. Click Next. 8.1 Access Point Configure the SSID and Channel Number if you have selected Access Point mode. Click Next. Step 7 Select an operation mode for your Access Point and click Next. The wizard will guide you to finish the following corresponding settings.

Resumen del contenido incluido en la página 4

8.2 Universal Repeater 8.4 Point-to-Point / Point-to-MultiPoint / WDS Bridge Click on Site Survey, select the wireless router or AP you wish to repeat on Same setup procedure applies to Point-to-Point Bridge, Point-to-MultiPoint the popup Wireless Site Survey window and click Connect. Bridge and WDS Bridge modes. For bridge mode, you need at least two Configure a network name in Main SSID for the repeater to be identified. Access Points. We will use Point-to-Point Bridge as an example.

Resumen del contenido incluido en la página 5

Step 10 Verify the settings you have configured and click Restart. Section 2 Technical Support E-mail: support@airlink101.com Toll Free: 1-888-746-3238 Website: www.airlink101.com Step 11 Click Finish to end the EZ Setup Wizard. If you are using Bridge mode, you need to follow the same configuration *Theoretical maximum wireless signal rate derived from IEEE standard 802.11 specifications. Actual data throu