Resumen del contenido incluido en la página 1
BiPAC 7800
Dual WAN
ADSL2+ Firewall Router
User Manual
Version released 1.01
Last revised date 11-11-2008
Resumen del contenido incluido en la página 2
Table of Contents Chapter 1: Introduction .....................................................................1 Introduction to your Router ..................................................................1 Features ............................................................................................2 Chapter 2: Installing the Router .......................................................4 Important note for using this router ....................................................4 Packag
Resumen del contenido incluido en la página 3
WAN ..................................................................................................41 WAN Profile (ADSL) ..........................................................................41 WAN Profile – Main Port (EWAN) .........................................................47 ADSL Mode .....................................................................................49 System ..............................................................................................50 Time Z
Resumen del contenido incluido en la página 4
Chapter 1: Introduction Introduction to your Router Thank you for purchasing BiPAC 7800 Router. Your new router is an all-in-one unit that combines an ADSL modem, ADSL2/2+ router and Ethernet network switch to provide everything you need to get the machines on your network connected to the Internet over an ADSL broadband connection. The BiPAC 7800 router complies with ADSL2+ standards for deployment worldwide and supports downstream rates of up to 24 Mbps and upstream rates of up to 1 Mbps. D
Resumen del contenido incluido en la página 5
Features Express Internet Access The router complies with ADSL worldwide standards. It supports downstream rate up to 12/24 Mbps with ADSL2/2+, 8Mbps with ADSL. Users enjoy not only high-speed ADSL services but also broadband multimedia applications such as interactive gaming, video streaming and real-time audio much easier and faster than ever. It is compliant with Multi-Mode standard (ANSI T1.413, Issue 2; G.dmt (ITU G.992.1); G.lite (ITU G.992.2); G.hs (ITU G994.1); G.dmt.bis (ITU G.992
Resumen del contenido incluido en la página 6
Domain Name System (DNS) Relay It provides an easy way to map the domain name (a friendly name for users such as www.yahoo. com) and IP address. When a local machine sets its DNS server with this router’s IP address, every DNS conversion request packet from the PC to this router will be forwarded to the real DNS in the outside network. Dynamic Domain Name System (DDNS) The Dynamic DNS service allows you to alias a dynamic IP address to a static hostname. This dynamic IP address is the WAN I
Resumen del contenido incluido en la página 7
Chapter 2: Installing the Router Important note for using this router 4
Resumen del contenido incluido en la página 8
Package Contents BiPAC 7800 Dual WAN ADSL2+ Firewall Router CD containing the online manual RJ-11 ADSL/Telephone cable Ethernet (RJ-45) cable Power adapter Quick Start Guide Splitter / Microfilter (Optional) 5
Resumen del contenido incluido en la página 9
The Front LEDs. LED Meaning Lit red when WAN port fails to get IP address. 1 Internet Flash green when WAN port gets IP address successfully and when data is transmitted. Lit Green when the device is successfully connected to an ADSL 2 DSL DSLAM. (“line sync”). Lit when connected to a broadband connection device. 3 EWAN Lit orange for 10/100Mbps. Blinking when data is Transmitted / Received. Lit when one of LAN ports is connected to an Ethernet device. Ethernet port Lit green when the sp
Resumen del contenido incluido en la página 10
The Rear Ports Port Meaning 1 Power Switch Power ON/OFF switch. 2 Power Connect it with the supplied power adapter. Press more than 1 second to restore the device to its default 3 RESET mode. Connect to a PC or an office/home network of 10Mbps, 4 Giga Ethernet 100Mbps or 1000Mbps using the provided RJ-45 Ethernet cables. WAN 10/100Mbps Ethernet port (with auto crossover 5 EWAN support). Connect Cable Modem, VDSL, and Fiber Modem or PON optic lines with your RJ-45 cable. Connect this port t
Resumen del contenido incluido en la página 11
Cabling One of the most common causes of problem is bad cabling or ADSL line(s). Make sure that all connected devices are turned on. On the front panel of your router is a bank of LEDs. Verify that the LAN Link and ADSL line LEDs are lit. If they are not, verify if you are using the proper cables. Make sure that all devices (e.g. telephones, fax machines, analogue modems) connected to the same telephone line as your router have a line filter connected between them and the wall outlet (unless
Resumen del contenido incluido en la página 12
Chapter 3: Basic Installation The router can be configured through your web browser. A web browser is included as a standard application in the following operating systems: Linux, Mac OS, Windows 98/NT/2000/XP/Me/Vista, etc. The product provides an easy and user-friendly interface for configuration. Please check your PC network components. The TCP/IP protocol stack and Ethernet network adapter must be installed. If not, please refer to your Windows-related or other operating system manuals.
Resumen del contenido incluido en la página 13
Connecting Your Router Users will not be able to connect to the internet through EWAN if DSL is already connected to the internet. Only one connection type (EWAN or DSL) is allowed to connect to the internet at one time. ADSL Router Mode Broadband Router Mode 10
Resumen del contenido incluido en la página 14
Network Configuration Configuring PC in Windows Vista 1. Go to Start. Click on Network. 2. Then click on Network and Sharing Center at the top bar. 3. When the Network and Sharing Center window pops up, select and click on Manage network connec- tions on the left window column. 4. Select the Local Area Connection, and right click the icon to select Properties. 11
Resumen del contenido incluido en la página 15
5. Select Internet Protocol Version 4 (TCP/IPv4) then click Properties. 6. In the TCP/IPv4 properties window, select the Obtain an IP address au- tomatically and Obtain DNS Server address automatically radio but- tons. Then click OK to exit the set- ting. 7. Click OK again in the Local Area Connection Properties window to apply the new configuration. 12
Resumen del contenido incluido en la página 16
Configuring PC in Windows XP 1. Go to Start > Control Panel (in Classic View). In the Control Panel, double-click on Network Connections 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window, click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address auto- matically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration. 13
Resumen del contenido incluido en la página 17
Configuring PC in Windows 2000 1. Go to Start > Settings > Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address auto- matically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration. 14
Resumen del contenido incluido en la página 18
Configuring PC in Windows 95/98/Me 1. Go to Start > Settings > Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP/IP > NE2000 Compatible, or the name of your Network Interface Card (NIC) in your PC. 3. Select the Obtain an IP address auto- matically radio button. 4. Then select the DNS Configurationtab. 5. Select the Disable DNS radio button and click OK to finish the configuration. 15
Resumen del contenido incluido en la página 19
Configuring PC in Windows NT4.0 1. Go to Start > Settings > Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Prop- erties. 3. Select the Obtain an IP address from a DHCP server radio button and click OK. 16
Resumen del contenido incluido en la página 20
Factory Default Settings Before configuring your router, you need to know the following default settings. Web Interface (Username and Password) Username: admin Password: admin The default username and password are “admin” and “admin” respectively. Device LAN IP settings IP Address: 192.168.1.254 Subnet Mask: 255.255.255.0 ISP setting in WAN site PPPoE DHCP server DHCP server is enabled. Start IP Address: 192.168.1.100 IP pool counts: 100 LAN and WAN Port Addresses The parameters of LAN
