Resumen del contenido incluido en la página 1
Wonderful Communication, Mobile Life.
Vodafone B970
3G Router from Vodafone
User Guide
Resumen del contenido incluido en la página 2
Notice Copyright © 2008 Huawei Technologies ual do not constitute the warranty of any kind, expressed or implied. Co., Ltd. Huawei Technologies Co., Ltd. Address: All Rights Reserved 6 Administration Building, Huawei Technologies 1 No part of this manual may be reproduced or Co., Ltd., Bantian, Longgang District, Shenzhen, transmitted in any form or by any means without P. R. China prior written consent of Huawei Technologies Postal Code: 518129 Co., Ltd. Website: http://www.huawei.com 2 T
Resumen del contenido incluido en la página 3
Safety Precautions Read the safety precautions carefully to ensure the Do not place your device or its accessories correct and safe use of your wireless device. For in containers with strong electromagnetic detailed information, see "Warnings and field. Precautions." Do not place magnetic storage media near your device. Radiation from the device may Do not switch on your device when the erase the information stored on them. device use is prohibited or when the device use may cause inte
Resumen del contenido incluido en la página 4
Table of Contents Table of Contents 1 UPnP Settings.......................................... 21 Remote Management .............................. 21 Using the Management Page 1 Troubleshooting 23 Logging In to the Management Page ........ 1 Abbreviations 25 Management Page Overview .....................1 Viewing Configuration Info .........................2 Optimized Settings .....................................2 Quick Setup................................................2 Accessing the Interne
Resumen del contenido incluido en la página 5
1Using the Management Page Item Description Logging In to the Management Optimize Improves wlan's speed of transmission Page and increases the upload speed of Internet Explorer if its version is lower than IE 6.0. 1 Start the Internet browser and enter the address Quick Setup Quickly configures the device. http://192.168.1.1 in the address bar. Connection Displays the network connection status and connects to the network. 2 Enter the password, and then click Login.The Advanced Conf
Resumen del contenido incluido en la página 6
Viewing Configuration Info Item Green icon Red icon 3 Click Refresh to view the current status on the advanced status page. WCDMA The WCDMA The WCDMA network network is is unavailable. available. Optimized Settings If the device is registered with Note In this page you can download a executable program other network modes, the which will modify some parameters in system. These corresponding network connection parameters will improve wlan's speed of transmission status is displayed.
Resumen del contenido incluido en la página 7
Using the Management Page Quick Setup PPP Authentication: This service is provided by Configuring PPP Profile Settings your ISP. For details, consult your ISP. • Profile Name: Enter a profile name when the text box Configuring WLAN Settings is empty. • Dial-up Number/PPP User Name/PPP Password: (Name) SSID: Enter a name for your wireless local 1 Enter these three parameters provided by the internet area network (WLAN). service provider (ISP). The dial-up number is used to • The service se
Resumen del contenido incluido en la página 8
Accessing the Internet setting. After the setting, you can select it is 0. To disable this function, you can set the value to Disabled to improve the WLAN security. 0 or null. WEP Configuring WLAN Encryption • Wireless Equivalent Privacy (WEP) is a 64-bit or 128-bit data encryption method. The 128-bit WEP encryption To access the WLAN, you must set the wireless provides higher security level. security key on your PC to be the same as that of the • Network key 1: You can enter 5 ASCII charac
Resumen del contenido incluido en la página 9
Using the Management Page Accessing the Internet correct PIN or PUK code, the network-related functions are unavailable. • The SIM card is supplied by the service provider. For details, contact your service provider. • When the Save PIN Code check box is 1 selected, the Auto validation is enabled. • If Auto validation is enabled, the PIN code is recorded and automatically validated after each restart. 2 If PPP Connection is Manual, click Connect / Disconnect to connect to or disconnec
Resumen del contenido incluido en la página 10
2Configuring Your Computer This takes the Windows XP operating system (OS) Configuring the Wireless Network as an example to describe how to configure your computer. For other OSs, the configurations may be 1 Choose Start > Control Panel > Network different and you need to configure them as required. Connections > Wireless Network Connection. 2 Click Show Wireless Networks to display the Wireless Configuration wireless network connection list. The wireless configuration allows your P
Resumen del contenido incluido en la página 11
Configuring Your Computer Configuring the PC Network Disabling Proxy Settings Configuring the PC Network The recommended configurations of the PC are as 1 Start the Internet browser, and then choose follows: Tools > Internet Options. • Obtain an IP address automatically. 2 • Deselect Use a proxy server for your LAN. 2 Select the Connections tab, and then click LAN Configuring the Network Connection Settings. 3 In the LAN Settings dialog box, deselect Use a 1 Choose My Network Pl
Resumen del contenido incluido en la página 12
3Advanced Settings Icon Description Overview Click to access the Dynamic DNS Settings Click Advanced Settings, you can configure both page. the basic attributes and advanced parameters of the Click to access the Static Route Settings device, and also perform routine maintenance and page. management to the device. The following table shows the functions of the shortcut icons. System Management Icon Description Click to access the System page. Click to access the System page. Changing th
Resumen del contenido incluido en la página 13
Advanced Settings System Management • Enable: The browsed webpage goes to the User Control device’s login page automatically when the net- work connection is disconnected. In this page the administrator can set some • Disable: The browsed webpage displays error configuration for user. when the network connection is disconnected. 1 Click . 5 Click OK. 3 2 Set the Status Page: Upgrading the device • Active: You can view the current parameter con- figuration information and the networ
Resumen del contenido incluido en la página 14
SIM Settings Restoring the Factory Defaults SIM Settings If you need to reconstruct the network or you forget the changes of some parameters, you can choose to Click to access the SIM Settings page. restore factory defaults and reconfigure the device. When the device works in the ROM-SIM mode, the page is not available. Click to access the Restore Defaults page, Enabling or Disabling the PIN Code and then click Restore. 1 Click . After this operation, all configurations are Note
Resumen del contenido incluido en la página 15
Advanced Settings Mobile Network Settings 2 Select Modify in the PIN Code Operation list Mobile Network Settings box. 3 Enter the current PIN code. Click to access the Mobile Network Settings page. 4 Enter the new PIN code and confirm it. Setting the Preferred Mode and Band 3 5 Click Apply. 1 Click . Auto Validating PIN Code 2 Select the preference of connection mode in the You can enable or disable the auto validate PIN code Preferred Mode list box. function. 1 Click
Resumen del contenido incluido en la página 16
Dial-up Settings 3 Select the band to search the network in the Dial-up Settings Band list box. 4 Click Apply. Click to access the Dial-up Settings page. Configuring the PPP Settings Configuring the Mode for Searching Network 1 Click to access the PPP Settings page. 1 Click . 2 Enter the correct parameters. • Profile List: Select a profile from the established 2 Select the mode for searching the network. dial-up connection list. If the drop-down list is • Auto: The device a
Resumen del contenido incluido en la página 17
Advanced Settings DHCP Settings • PPP Max Dial Time: Set the maximum waiting ◆ Deleting a Profile time when connecting to the Internet. 1 Select a profile to be deleted in the Profile List 3 Click Apply. drop-down list. Managing the Profile List 2 Click Delete. 3 Click to access the Profile Settings page. DHCP Settings ◆ Creating a Profile Click to access the DHCP Settings page, you 1 Enter the profile information in the text box can set the mode for assigning IP addresses in
Resumen del contenido incluido en la página 18
WLAN Settings • Start IP Address/End IP Address: It is used to define Enabling or Disabling the WLAN the IP address range that the host can use during the IP address assignment. For example, in the network segment 192.168.1.0/24, the default IP address of the 1 Click to access the WLAN Enable page. device is 192.168.1.1. The host IP address can range from 192.168.1.2 to 192.168.1.254. The minimum 2 Select Enabled/Disabled to enable or disable range is a single IP address. the WLAN. •
Resumen del contenido incluido en la página 19
Advanced Settings WLAN Settings ◆ Enabling or Disabling the AP Isolation Mode Description • On: The terminals (PCs) connecting to the device 54g LRS If the device has difficulties in through the WLAN cannot communicate with each communicating with devices other. conforming to the IEEE 802.11b • Off: The terminals (PCs) connecting to the device standards, select this mode. through the WLAN can communicate with each other. 54g Only The device can only work in the low ◆ Selecting a Country
Resumen del contenido incluido en la página 20
WLAN Settings A security key can protect your WLAN from illegal ◆ MAC Restrict Mode data attacking. The security key of your wireless The following table shows the MAC address filter device must be consistent with that of the PC. modes: ◆ Configuring the 802.11 Authentication Parameter Description • Open: Open system authentication. A user accessing Disabled The MAC address filter function is the WLAN can choose WEP, WPA-PSK, or WPA2-PSK disabled. key to pass the authentication or choose No
