Manual de instrucciones de Belkin F5D5230

Resumen del contenido incluido en la página 1

5. Select your connection type (this information is provided by your ISP) and click
"Select". Depending on your selection, you will see the "Static IP Address" page or
the "PPPoE" page. Enter the required values provided by your ISP and click "Enter".
6. The “MAC Cloning/Entry” screen will appear. If your ISP binds your connection to
the MAC address of your network adapter, click "Clone MAC Address" or enter the
MAC address here. Press “Enter”.
4-Port Cable/DSL
Gateway Router
®
Quick Setup Guid

Resumen del contenido incluido en la página 2

4. Close the window. The following window will appear. Click "Save". 5. Connect the power adapter to the Router. 6. After the cable or DSL modem and the Router are turned on, the Router’s WAN link light should be on. This indicates that the modem and the Router are connected to each other. 7. Turn on the rest of your computers. After your computers boot up, a LAN link light (on the front of the Router) will 5. Restart the computer. be on for each port to which a computer is connected. These li