Resumen del contenido incluido en la página 1
A-C7X-100-11 (1)
Digital Video
Camera Module
Technical Manual
XCD-V50CR (Color model)
XCD-V50 (Black and white model)
2005 Sony Corporation
Resumen del contenido incluido en la página 2
Table of Contents Overview Main Features ............................................................ 3 System Components................................................. 4 Connection Diagram ................................................. 5 Location of Parts and Operation.............................. 6 Functions Gain ............................................................................ 7 Shutter ........................................................................ 7 Trigger Shutter
Resumen del contenido incluido en la página 3
Overview Overview The XCD-V50CR/V50 with its 1/3-type PS IT CCD is industrial-use digital video camera module. Utilizing Main Features an IEEE 1394b-2002 digital interface, transfer rates as high as 800 Mbps are realized. In addition, the use of The XCD-V50 video camera module digital signals enables industrial-use image processing utilizes a 1/3-type PS IT CCD without “image deterioration,” an important plus in the industrial world. Moreover, the use of a square pixel RAW mode output using the
Resumen del contenido incluido en la página 4
Overview System Components The XCD-V50CR/V50 Video Camera Module system comprises the following components. Video Camera Module XCD-V50CR/V50 IEEE1394b Cable C-mount Lens (9 pin-9 pin 4.5 m) Host Adapter Card Tripod Adapter (Commercially available) VCT-ST70I (Isolated type) XCD-V50CR XCD-V50 4
Resumen del contenido incluido en la página 5
Overview Connection Diagram XCD-V50CR/V50 C-mount Lens IEEE1394b Cable Host Adapter Card Host Equipment (PC, etc.) Tripod Adapter VCT-ST70I XCD-V50CR XCD-V50 5
Resumen del contenido incluido en la página 6
Overview Location of Parts and Operation Front/Top/Bottom Rear Panel 1 2 4 5 3 1 4 6 2 3 3 1 Lens mount (C-mount) 4 IEEE1394b connectors Attach any C-mount lens or other optical equipment. Connect the IEEE1394b cable (supplied) to this connector. Note The lens must not project more than 7 mm (9/32 inch) 5 Pilot lamp from the lens mount. This lamp indicates the camera module operation states: 1 Lens mount face 2 7 mm (9/32 inch) or less OFF: Camera power OFF 2 Auxiliary holes (Top) Green: Camera
Resumen del contenido incluido en la página 7
Functions Functions Gain Trigger Shutter Manual Gain setting is available with this camera. Trigger shutter is useful for capturing images in The variable range extends from 0 to 18 dB, and the response to a trigger that starts the exposure to match a unit is designed so that the gain can be subdivided and preset timing. It can also be used to capture an image set to any of 512 steps. using multiple cameras with the same timing. When a At the factory default setting, the gain is set to 0 dB. tri
Resumen del contenido incluido en la página 8
Functions 16-bit Mode White Balance (XCD-V50CR only) The camera supports 16-bit Black & white (Monochrome) mode, but because the output of the AD You can adjust the R and B gain with respect to G. converter is 14-bit, only the least significant 14 bits of Shoot a white object and adjust the two gains to the 16 bits will handle data. The upper 2 bits will be standardize the signal levels of R, G, and B. filled with zeros. 00dddd | dddddddd Hue (XCD-V50CR only) ExposureOut You can adjust the G gai
Resumen del contenido incluido en la página 9
Control Control The remaining 28 bits can be allocated to the camera Camera Command as addresses, but in reality, the first 2 bits are fixed at 0, so the largest number of bits that can be allocated to Status Register the camera as address space is 24 bits. The bus and node IDs may be changed if the topology is re- structured because of bus reset, so only the least This camera complies with IIDC 1394-based Digital significant 32 address bits are shown in this User’s Camera Specification, Version
Resumen del contenido incluido en la página 10
Control ConfigROM Offset 0-7 8-15 16-23 24-31 Bus 400h 04 21 ROM CRC Info 404h 31 33 39 34 Block 408h 20 FF 60 00 40ch 08 00 46 02 NodeVendorID/ChipID-Hi 410h 00 10 00 01 ChipID-Lo Root 414h 0003 CRC Directory 418h 03 08 00 46 ModuleVendorID 41ch 0C 00 83 C0 420h D1 00 00 01 UnitDirectoryOffset With the exception of bits 8 to 15 of the 400h offset The UnitDirectory offset address is required to be address field, the length of the entire ConfigROM is 420h +000004h * 1 = 424h made up of 21h Quadle
Resumen del contenido incluido en la página 11
Control Offset 0-7 8-15 16-23 24-31 Unit 434h 000B CRC Dependent 438h 40 3C 00 00 CommandRegsBase Info 43Ch 81 00 00 0A VendorNameLeaf 440h 82 00 00 0D ModelNameLeaf 444h 38 00 00 10 Unit sub sw version 448h 39 00 00 00 Reserved 44Ch 3A 00 00 00 Reserved 450h 3B 00 00 00 Reserved 454h 3C 00 00 01 Vendor unique info 0 458h 3D 00 00 00 Vendor unique info 1 45Ch 3E 00 00 00 Vendor unique info 2 460h 3F 00 00 00 Vendor unique info 3 For offset address 434h, the length of the The offset address of Ve
Resumen del contenido incluido en la página 12
Control Control Base Address Every register address is decided based on the base address found in the CommandRegsBase field of ConfigROM. F0F00000h is the control base address on this camera. Inquiring Supported Video Modes First, we will find out what video formats are supported. Address Data F0F00100h 80000000h We find that Format0 is supported. Next, for each format, we will find out which video modes are supported. Format0 Address Data F0F00180h 06000000h We find video modes 5 and 6 of Forma
Resumen del contenido incluido en la página 13
Control Video Mode Settings Starting/Stopping Video Transfer Select the video mode you want to use from the tables, and make the required settings. As example, the (ContinuousShot) register setting for Format0, Mode5, and a frame rate of 60 fps is shown. In the device driver, after the preparations for In addition, an isochronous transfer speed of receiving isochronous data are made, video transfer 800 Mbps, and isochronous channel 0 are used in this starts when the following commands are issued
Resumen del contenido incluido en la página 14
Control Feature Controls This camera supports the following features. Shutter Controls the exposure time. Can be controlled by both relative control values from 1/100000 of a second to 1/15s, allocated from 1 to 3196. Gain Can be changed to 0 to 18 dB, subdivided in 512 steps. Trigger Sets external trigger mode. Trigger Mode 0 and 1 are available. Software Trigger Mode in which triggers can be output by software. The XCD-V50CR supports the following additional features. White Balance Adjusts th
Resumen del contenido incluido en la página 15
Control Shutter (exposure time) control White Balance control (XCD-V50CR only) Address Data Address Data F0F0081C 82000ddd Sets Shutter manually. F0F0080C 82bbbrrr Sets R and B Gain. “bbb” sets B Gain, “rrr” sets R Gain. Gain control Hue (G Gain) control (XCD-V50CR only) Address Data Address Data F0F00820 82000ddd Sets Gain manually. F0F00810 82000ddd Sets G Gain. Trigger control Address Data F0F00830 82000000 Sets to Hardware Trigger Mode0. 82010000 Sets to Hardware Trigger Mode1. 82E00000 Sets
Resumen del contenido incluido en la página 16
Appendix Appendix Notes on the Camera Operations When using Trigger mode When this camera is set to accept a trigger at the fastest possible timing, it can accept overlap of the next trigger signal in the midst of video transmission. For this reason, a trigger inhibition period is not available. Thus, if a trigger signal is input before the CCD can change to the state where it can accept exposures, multiple exposures can occur, and it cannot capture the correct image. Make sure that the followin
Resumen del contenido incluido en la página 17
Appendix Specifications 1 Image sensor /3-type progressive scan IT transfer CCD Number of effective pixels Approx. 330,000 659 (H) × 494 (V) Unit cell size 7.4 µm (H) × 7.4 µm (V) Interface format IEEE1394b-2002 Transfer speed 800, 400 Mbps Protocol IIDC 1394-based Digital Camera Specification Version 1.31 Compliant Image format 640 × 480 Mono8/16 Frame rate 15/30/60 fps (mono8) 15/30 fps (mono16) Lens mount C-mount Flange back 17.526 mm Minimum illumination XCD-V50CR: 20 lx (F0.95, Gain: +18 dB
Resumen del contenido incluido en la página 18
Appendix CCD Pixel Location (Top View) Total number of pixels: 692 (H) × 504 (V) Number of effective pixels: 659 (H) × 494 (V) Number of output pixels: 640 (H) × 480 (V) XCD-V50CR 18 XCD-V50
Resumen del contenido incluido en la página 19
Appendix Spectral Sensitivity (Relative Response) Parameters (Without lens and light source parameters.) XCD-V50 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 400 500 600 700 800 900 1000 Wave Length [nm] XCD-V50CR 1.0 G 0.9 R 0.8 B 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 400 450 500 550 600 650 700 Wave Length [nm] XCD-V50CR 19 XCD-V50 Relative Response Relative Response
Resumen del contenido incluido en la página 20
Appendix Dimensions Unit: mm XCD-V50CR 20 XCD-V50
