Resumen del contenido incluido en la página 1
VT-M284A
1
HITACHI
Video Deck
VT-M284A
Owner's Manual
Your Complete Guide
to Videocassette Viewing
and Recording
Using these quality features:
Automatic tape head cleaning
Up to 8 delayed recording programs
Auto tracking for improved picture in playback
Cable-compatible frequency synthesizer quartz tuner
Illuminated remote control for use with your VCR and TV
All basic playback functions on convenient shuttle control
On-screen programming guid
Resumen del contenido incluido en la página 2
Introduction ................................................................................................................................................. 4 FOR YOUR SAFETY........................................................................................................................... 4 IMPORTANT SAFEGUARDS .................................................................................................................. 6 Getting Started....................................
Resumen del contenido incluido en la página 3
Recording Tips.................................................................................................................................... 31 Using the Instant Recording Timer (IRT)........................................................................................ 32 Setting the VCR to Record Later ..................................................................................................... 33 Reviewing What You Have Programmed ..........................................
Resumen del contenido incluido en la página 4
Introduction Introduction FOR YOUR SAFETY POWER SUPPLY: AC 120V, 60 Hz ONLY. The POWER switch turns the VCR on and off, leaving the clock/timer unaffected. If the unit is to be left unattended for a long period, it is recommended that the unit be completely switched off and unplugged. Illustrated below is the label on the back of your unit. This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Ther
Resumen del contenido incluido en la página 5
Introduction Caution to user: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. "Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of
Resumen del contenido incluido en la página 6
IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS In addition to the careful attention devoted to quality standards in the manufacture of your video product, safety is a major factor in the design of every instrument. But, safety is your responsibility too. This page lists important information that will help to assure your enjoyment and proper use of a Video Cassette Recorder and accessory equipment. Please read it carefully before operating your video product and keep it in a handy pla
Resumen del contenido incluido en la página 7
IMPORTANT SAFEGUARDS broken plugs. They may result in shock or fire hazard. Periodically examine the cord and have it replaced by your service technician if appearance indicates damage or deteriorated insulation. 7 Power Cord Protection -- Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the app
Resumen del contenido incluido en la página 8
IMPORTANT SAFEGUARDS accessory recommended by the manufacturer. 11A An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. 12 Outdoor Antenna Grounding -- If an outside antenna or cable system is connected to the video product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
Resumen del contenido incluido en la página 9
IMPORTANT SAFEGUARDS SERVICE 17 Servicing -- Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 18 Conditions Requiring Service -- Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions. a. When the power-supply cord or plug is damaged b. If liquid has been
Resumen del contenido incluido en la página 10
Getting Started Getting Started Relax. Using a VCR is very straightforward. This sections explains how to hookup the VCR, quick tour of the controls, set up for first-time operation using on-screen menus, and videocassette tapes. Enjoy getting to know all about your Hitachi VCR. Let's get started. Simple Hookups 1 Decide Where to Put Your VCR Be sure your chosen location allows for proper ventilation, stability, and protection from heat and moisture (see Important Safegu
Resumen del contenido incluido en la página 11
Getting Started We will guide you through this process. But first, turn the TV and the VCR around so you are looking at their backs. Note the various input and output receptacles, their shapes, and how they are labeled. Then read through the rest of this hookup section before proceeding to an actual hookup. DO NOT TURN ON THE POWER YET. FOR YOUR SAFETY, LEAVE YOUR TV AND VCR UNPLUGGED WHILE HOOKING THEM UP. 3 Hook up the Audio/Video Signal If your TV is a fairly recent model, you pro
Resumen del contenido incluido en la página 12
Getting Started 4 Hook up the RF Signal Look at the back of your TV for a connector that looks like one of these, and follow the corresponding hookup option. If you have any sort of cable box, see the hookup options in Advanced Operations (page 50). Simple Antenna/Cable 75 Ohm Hookup This is an easy hookup that you can use if your cable or antenna has a 75 ohm round wire connector. You will need the 75 ohm cable supplied with your VCR. It looks like this: If you have been watching
Resumen del contenido incluido en la página 13
Getting Started External or Internal 300 Ohm Antenna If you have either an external or internal (rabbit ears) antenna rather than cable, you may have 300 ohm connectors like these. In this case, you will need special adapters to make the 75 ohm round wire connection shown below. (You may already have one on your TV.) 1. Remove the antenna line from the back of your TV if it is already connected there, or take it from where it comes in on the wall. 2. Considering the three pictures bel
Resumen del contenido incluido en la página 14
Getting Started strong signal. Connect the antenna to the adapter, and use the cable extension to go from the adapter to the VCR. Use the supplied 75 ohm cable to connect the VCR to the TV. Now continue with the hookup: 1. Using whichever adapter you have fit your antenna with, attach that connector to the IN FROM ANT jack on the back of the VCR. 2. Using the 75 ohm cable supplied with your VCR, connect either end to the OUT TO TV jack on the back of the VCR. 3. Use a second adapter
Resumen del contenido incluido en la página 15
Getting Started 7 Set the RF or Video Channel Switch When the VCR is on, its video signal can come into your TV on either channel 3 or channel 4. You need to select the appropriate channel. Turn the power on to both the TV and the VCR, and look for a switch on the back of the VCR. Set the switch to 3 or 4, whichever is not a commercial channel in your area. Your basic hookup is now complete. When you're ready to try hooking up a second VCR or a video camera for a complete home en
Resumen del contenido incluido en la página 16
Getting Started (Controls) Getting Started (Controls) Quick Tour of the Controls Study these pictures carefully to learn about the buttons and controls that you'll need for everyday operation. Various controls are explained throughout this manual as they are needed, but now is a good time to get familiar with their locations. Most of the time, you'll be directing the VCR from the remote control, but there are some controls on the VCR that will come in handy too. When you're familiar
Resumen del contenido incluido en la página 17
Getting Started (Controls) Remote Control Buttons POWER Turns the VCR on and off. GUIDE Brings up an on-screen setup and programming guide, the Easy Guide System. VCR/TV Switches between viewing through the VCR and not viewing through the VCR. CLEAR Used in on-screen programming and indexing. DISPLAY Used in on-screen programming and indexing. VOLUME Increase or decrease the audio volume. MUTE Turns off the audio until you press MUTE again. REC Starts recording on the station th
Resumen del contenido incluido en la página 18
Getting Started (Controls) If the remote is not working even at close range, try putting in two fresh AA batteries. When replacing the batteries, remove the old batteries and press the POWER button on the remote and hold it for about 10 seconds, then insert two fresh batteries. Objects in the Way There may be objects between the remote and the VCR - for instance, a stack of books on the coffee table, your 2-year-old child, the dog. Hold the remote so that it points at the VCR with noth
Resumen del contenido incluido en la página 19
Getting Started (Controls) Display Indicators Watch for these signs and symbols that let you know that the VCR is responding to your instructions. Meet Your On-Screen Guide Your Hitachi VCR has as a special feature called the Easy Guide System. This feature guides you through simple setup and programming tasks right on the TV screen. With the TV and VCR turned on, press GUIDE on the remote control. You will see this screen: You may view all the on-screen instructions in English, Fr
Resumen del contenido incluido en la página 20
Getting Started (Initial Setup) Getting Started (Initial Setup) Setup for First-Time Operation Before you use your VCR to watch or record from your TV, you need to "tell" the VCR whether your TV uses cable or antenna input and let it program itself to receive your TV's channels. It's also a good idea to set the clock so you can do timed recording later. With your TV and VCR hooked up, turn them both on and follow these steps using the remote control. Initial Setup Options Pre
