Manual de instrucciones de Altec Lansing inMotion iMX2

Resumen del contenido incluido en la página 1

Resumen del contenido incluido en la página 2

FCC Instructions for a Class B digital device or peripheral Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio co

Resumen del contenido incluido en la página 3

The lightning flash with arrowhead, within an Caution: To prevent the risk of electric shock, do not The exclamation point within an equilateral triangle is equilateral triangle, is intended to alert the user to the remove cover (or back). No user- serviceable parts intended to alert the user to the presence of important presence of uninsulated “dangerous voltage” within the inside. Refer servicing to qualified service personnel. operating and maintenance (servicing) instructions in product’s encl

Resumen del contenido incluido en la página 4

Power INMOTION IMX2 Use one of the following two options to power your inMotion iMX2: MOBILE AUDIO DOCK AC (Wall outlet) Power Thank you for purchasing this Altec Lansing product. For generations, Insert the barrel connector from the power supply into the DC Altec Lansing has been first in audio innovation. Today, our line of connector on the back of the inMotion iMX2. After this connection is powered speakers has received more performance awards than any made, insert the power supply into a wal

Resumen del contenido incluido en la página 5

Troubleshooting Symptom Possible Problem Solution Power LED is The power supply isn’t connected to a wall outlet Insert the barrel connector from the power supply into the DC connector not lit (AC and/or the power supply connector is not plugged on the back of the inMotion iMX2. After this connection is made, insert Operation). into the DC connector on the back of the inMotion the power supply into a wall outlet. iMX2. The surge protector (if used) isn’t powered on. If the power supply is plugge

Resumen del contenido incluido en la página 6

Resumen del contenido incluido en la página 7

Resumen del contenido incluido en la página 8

Solución de problemas Síntoma Posible problema Solución El indicador LED La fuente de suministro no está conectada a un Inserte el conector cilíndrico de la fuente de suministro en el conector CC de encendido tomacorriente de pared y /o el conector de la ubicado en la parte posterior del inMotion iMX2. Después de hacer esta no está fuente de suministro no está enchufado en el conexión, inserte la fuente de suministro en un tomacorriente de pared. iluminado conector CC ubicado en la parte posteri

Resumen del contenido incluido en la página 9

7

Resumen del contenido incluido en la página 10