Manual de instrucciones de American Power Conversion 1050

Resumen del contenido incluido en la página 1

®
990-2012F Revision 7 12/03
APC Back-UPS Pro
1000/1050/1100/1400
User’s Manual


Installation and Initial Start-Up
To obtain warranty coverage, please fill out and
Check the Site Wiring Fault Indicator
return the warranty registration card now.
Location: Top right corner of UPS back panel.
Connect Telephone / Network Surge
Inspection
Suppression (Optional)
Caution: If the site wiring fault indicator lights,
Inspect the UPS upon receipt. Notify the carrier
Connect a singl

Resumen del contenido incluido en la página 2

Replacing the Battery Troubleshooting Problem Possible Cause Solution UPS will not turn “On”. On/Off/Test button not Press the On/Off/Test This UPS has an easy to replace hot-swappable battery. Battery replacement is a safe pushed. button to power the UPS procedure, isolated from electrical hazards. You may leave the UPS and loads on for the and the loads. following procedure. See your dealer or call the number in this manual for information on replacement battery kits. UPS input cir