Manual de instrucciones de MGE UPS Systems PULSAR M 3000 RT 3U

Manual de instrucciones del aparato MGE UPS Systems PULSAR M 3000 RT 3U

Aparato: MGE UPS Systems PULSAR M 3000 RT 3U
Categoría: Cargador
Fabricante: MGE UPS Systems
Tamaño: 0.7 MB
Fecha de añadido: 1/25/2014
Número de páginas: 24
Imprimir el manual

Descargar

¿Cómo se utiliza?

Nuestro propósito es proporcionarte el acceso más rápido posible a los contenidos incluidos en los manuales de instrucciones del aparato MGE UPS Systems PULSAR M 3000 RT 3U. Utilizando la vista previa online, puedes ver rápidamente el índice de contenidos y pasar a la página donde encontrarás la solución a tu problema con MGE UPS Systems PULSAR M 3000 RT 3U.

Para tu comodidad

Si ver los manuales de instrucción de MGE UPS Systems PULSAR M 3000 RT 3U directamente en esta página no es cómodo para ti, puedes utilizar dos soluciones posibles:

  • Vista en pantalla completa – Para ver cómodamente los manuales de instrucciones (sin descargarlos en tu ordenador) puedes utilizar el modo de vista en pantalla completa. Para activar la vista del manual MGE UPS Systems PULSAR M 3000 RT 3U en pantalla completa, utiliza el botón Pantalla completa
  • Descargar al ordenador – también puedes descargar el manual de instrucciones de MGE UPS Systems PULSAR M 3000 RT 3U a tu ordenador y guardarlo en tu colección. Sin embargo, si no quieres ocupar espacio en tu dispositivo, siempre podrás descargarlo de ManualsBase.
MGE UPS Systems PULSAR M 3000 RT 3U Manual de instrucciones - Online PDF
Advertisement
« Page 1 of 24 »
Advertisement
Versión impresa

Muchas personas prefieren no leer el documento en la pantalla, sino en versión impresa. La opción de impresión también está prevista y puedes utilizarla haciendo clic en el enlace más arriba - Imprimir el manual. No tienes que imprimir el manual completo de MGE UPS Systems PULSAR M 3000 RT 3U, solo las páginas que elijas. Ahorra papel.

Resúmenes

A continuación encontrarás resúmenes de los contenidos incluidos en las páginas posteriores del manual de instrucciones para MGE UPS Systems PULSAR M 3000 RT 3U. Puedes utilizarlos si quieres ver rápidamente el contenido que se encuentra en la siguientes páginas del manual.

Resúmenes de contenidos
Resumen del contenido incluido en la página 1

www.mgeups.com
Pulsar M
2200 RT 2U
2200 RT 3U
3000 RT 2U
3000 RT 3U
3000 RT 3U XL
EXB RT 3U
Installation and user
manual
34003641FR/AA - Page 1

































Resumen del contenido incluido en la página 2

34007776EN/AB - Page 2

Resumen del contenido incluido en la página 3

Introduction Thank you for selecting an MGE UPS SYSTEMS product to protect your electrical equipment. The Pulsar M range has been designed with the utmost care. We recommend that you take the time to read this manual to take full advantage of the many features of your UPS (Uninterruptible Power System). Before installing Pulsar M, please read the booklet on the required safety instructions. Then follow the indications in this manual. To discover the entire range of MGE UPS SYSTEMS products an

Resumen del contenido incluido en la página 4

Introduction Pictograms Important instructions that must always be followed. Information, advice, help. Visual indication. Action. Audio signal. In the illustrations on the following pages, the symbols below are used: LED off LED on LED flashing 34007776EN/AB - Page 4

Resumen del contenido incluido en la página 5

Contents 1. Presentation 1.1 Standard positions ...................................................................................................................... 6 Tower position................................................................................................................................ 6 Rack position ................................................................................................................................. 6 1.2 Rear panels.........................

Resumen del contenido incluido en la página 6

1. Presentation 1.1 Standard positions Tower position Dimensions (H x W x D) in mm Pulsar M 2200 RT 2U 440 x 86 x 640 Pulsar M 2200 RT 3U 440 x 131 x 490 Pulsar M 3000 RT 2U 440 x 86 x 640 Pulsar M 3000 RT 3U 440 x 131 x 490 Pulsar M 3000 RT 3U XL 440 x 131 x 490 Pulsar M EXB RT 3U 440 x 131 x 490 Weights in kg Pulsar M 2200 RT 2U 31 Pulsar M 2200 RT 3U 30 Pulsar M 3000 RT 2U 31 Pulsar M 3000 RT 3U 30 Pulsar M 3000 RT 3U XL 17 Pulsar M EXB RT 3U 42 Rack position 34007776EN/AB - Page 6

Resumen del contenido incluido en la página 7

1. Presentation 1.2 Rear panels Pulsar M 2200 / 3000 (1) USB communication port    (2) RS232 communication port (3) Connector for automatic recognition of an additional battery module (4) Slot for optional communication card (5) Connector for remote ON/OFF and RPO (Remote Power Off) control (6) Connector for additional battery module       (7) 16 A outlet for connection of equipment (8) Two groups of 2 programmable outlets for connection of equipment (9) Groups of 4 outlet

Resumen del contenido incluido en la página 8

2. Installation 2.1 Unpacking and contents check                  !"         (30) Pulsar M 2200 or 3000 UPS Elements supplied depending on the version or optional (31) connection cable to AC-power source (38) Mounting kit for 19-inch bays (32) 2 connection cables for the protected equipment (39) 2 supports for the upright position (2U version only) (33) RS232 communications cable (40)

Resumen del contenido incluido en la página 9

2. Installation 2.2 Installation in tower position       2.3 Installation in rack position It is advised to first install the battery module, then the power module above. Follow steps 1 to 4 for module mounting on the rails.          The rails and necessary hardware are supplied by MGE UPS SYSTEMS. 34007776EN/AB - Page 9

Resumen del contenido incluido en la página 10

2. Installation 2.4 Communication ports Connection of RS232 or USB communication port (optional) The RS232 and USB communication ports cannot operate simultaneously. 1 - Connect the RS232 (33) or USB (34) communication cable to the serial or USB  port on the computer equipment. 2 - Connect the other end of the communication cable (33) or (34) to the USB (1) or RS232 (2) communication port on the  UPS. The UPS can now communicate with MGE UPS SYSTEMS power management softw

Resumen del contenido incluido en la página 11

2. Installation 2.5 Connections with a FlexPDU (Power Distribution Unit) module (optional) 1 - Connect the UPS socket (10) to the AC-  power source using the cable (31) supplied. 2 - Connect the input socket on the FlexPDU module (48) to the UPS outlet (7) using the cable (41) supplied. The cable and the connectors are marked in red.    3 - Connect the equipment to the outlets (45), (46) and (47) on the FlexPDU module. These outlets differ, depending on the version of the FlexPDU

Resumen del contenido incluido en la página 12

2. Installation HotSwap MBP-module operation The HotSwap MBP module has a rotary switch (53) with two positions: Normal - the load is supplied by the UPS, Bypass - the load is supplied directly by the AC-power source.    UPS start-up with the HotSwap MBP module 1 - Check that the UPS is correctly connected to the HotSwap MBP module. 2 - Set switch (53) to the Normal position. 3 - Start the UPS by pressing the ON/OFF button (27) on the UPS control panel. The load is supplied by the U

Resumen del contenido incluido en la página 13

3. Operation 3.1 Start-up and normal operation For the initial start, AC power must be present to detect any wiring errors. Subsequently, the UPS can start even if AC power is not present. Press button (27) for approximately 1 second.  ◗ The buzzer beeps once and all the LEDs go ON simultaneously.  ◗ The buzzer then beeps twice during the self-test, then button (27)  remains ON, indicating that the load outputs are supplied. The connected devices are protected by the UPS. ◗

Resumen del contenido incluido en la página 14

3. Operation End of battery backup time ◗ All the LEDs go OFF. ◗ The audio alarms stops. The UPS is completely shut down. 3.3 Return of AC power Following an outage, the UPS restarts automatically when AC power returns (unless the restart function was disabled via UPS personalisation) and the load is again supplied. 3.4 UPS shutdown  Press button (27) for approximately 2 seconds.   The devices connected to the UPS are no longer supplied.   3.5 Using the UPS remote c

Resumen del contenido incluido en la página 15

3. Operation Contact open: shut down of UPS - Contact closed: start-up of UPS (UPS connected to the network and network energized) Note: local On/Off control via button (27) has priority over the remote control order. Contact open: shut down of UPS - To return to normal operation, deactivate the external remote shut down contact and restart the UPS using button (27). 4 - Plug connector (5) into the back of the UPS. 5 - Connect and restart the UPS according to the previously descri

Resumen del contenido incluido en la página 16

4. Access to measurements and personalisation data 4.1 Display menus arrangement   ./0&      , .  /              / " "/                   4.2 Access to measurements Press the scroll button (25) to access any status conditions and alarms, then the measurements for voltage, current, frequency, power output and battery backup

Resumen del contenido incluido en la página 17

4. Access to measurements and personalisation data Output personalisation Function Factory setting Other available settings Comments (1) Output voltage 230 Volts AC 200/208/220/240 Volts AC (1) Frequency converter Disabled Enabled The connected devices are never transferred to the bypass. (1) Output frequency Automatic selection 50 or 60 Hz User selectable only if the frequency-converter function is enabled. Transfer to the bypass AC Bypass AC power must Bypass AC power may be (1) input be

Resumen del contenido incluido en la página 18

5. Maintenance 5.1 Troubleshooting If LED (21) or (22) is ON, a fault or an alarm has occurred. Use the escape button (24) to stop the audio alarm. Indication Diagnostic Correction 1 The UPS does not start, The AC input power is not Check the UPS is correctly the alphanumeric display indicates: connected or is connected to the connected to the AC input power. COLD START NOK UPS output. CHECK AC WIRING 2 LED (22) is ON, the SWF LED (11) at Phase inversion on AC input power. ◗ In an earthed-ne

Resumen del contenido incluido en la página 19

5. Maintenance Troubleshooting a UPS equipped with the HotSwap MBP module Indication Diagnostic Correction 10 The load is no longer supplied when ◗ The protected devices are Check the wiring between the UPS the rotary switch (49) on the HotSwap connected to the UPS output and the HotSwap MBP module (see MBP module is set to the Bypass instead of to the HotSwap MBP section 2.6). position. module. ◗ The AC-power cord is connected to the UPS input instead of to the HotSwap MBP module. 11

Resumen del contenido incluido en la página 20

5. Maintenance D - Remove the metal protection cover in front of the battery (two screws).  E - Pull the plastic tab to remove the battery block and replace it. 1 Mounting the new battery module Carry out the above instructions in reverse order. ◗ To ensure safety and high performance, use only batteries supplied by MGE UPS SYSTEMS. ◗ Take care to firmly press together the two parts of the connector during remounting. 5.3 Maintenance on a UPS equipped with the HotSwap MBP


Manuales de instrucciones similares
# Manual de instrucciones Categoría Descargar
1 MGE UPS Systems 11+ Manual de instrucciones Cargador 46
2 MGE UPS Systems 1100 Tower Manual de instrucciones Cargador 21
3 MGE UPS Systems 1200 Manual de instrucciones Cargador 27
4 MGE UPS Systems 1100 Manual de instrucciones Cargador 64
5 MGE UPS Systems 1100 Rack Manual de instrucciones Cargador 21
6 MGE UPS Systems 14+ Manual de instrucciones Cargador 40
7 MGE UPS Systems 1500 Rack Manual de instrucciones Cargador 18
8 MGE UPS Systems 12280 kVA Manual de instrucciones Cargador 0
9 MGE UPS Systems 2000 Manual de instrucciones Cargador 31
10 MGE UPS Systems 12 kVA Manual de instrucciones Cargador 7
11 MGE UPS Systems 1500 Tower Manual de instrucciones Cargador 16
12 MGE UPS Systems 1500C Manual de instrucciones Cargador 35
13 MGE UPS Systems 18/280 kVA Manual de instrucciones Cargador 4
14 MGE UPS Systems 2000 RT 2U Manual de instrucciones Cargador 59
15 MGE UPS Systems 300 Manual de instrucciones Cargador 82
16 Sony AC U50A Manual de instrucciones Cargador 5
17 Sony AC LS1 Manual de instrucciones Cargador 2
18 Sony NP-FM30 Manual de instrucciones Cargador 35
19 Sony NP FX101 Manual de instrucciones Cargador 1
20 Sony NH-AAA-DA Manual de instrucciones Cargador 2