Manual de instrucciones de Network Instruments SFMFF4040-100

Resumen del contenido incluido en la página 1

User’s Guide
SFMFF4040-100
Optical Line Converter for
Small Form Factor Pluggable (SFP)
Transceiver Modules
The Transition Networks SFMFF4040-100 optical line
converter is designed to accommodate two (2) small
form factor pluggable (SFP) transceiver modules.
The following SFP transceiver modules are compatible with the SFMFF4040-100 converter
and are available from Transition Networks (sold separately).
Port 1 Port 2
SFMFF4040-100 empty empty
Part Number Description
TN-SFP-SX LC, 1000Base-SX,

Resumen del contenido incluido en la página 2

SFMFF4040-100 Optical line converters -- continued Installation -- continued *Typical maximum cable distance. Actual distance is dependent upon the physical Remove SFP Transceiver Modules characteristics of the network. To remove a SFP transceiver module from the SFMFF4040-100 converter: NOTE: Third-party Multi-Source Agreement (MSA) compliant Small Form Factor 1. Swing the handle on the SFP transceiver to the “out” position. Pluggables (SFPs) can be used in the SFMFF4040-100. 2. Carefully pull

Resumen del contenido incluido en la página 3

SFMFF4040-100 Technical Specifications -- continued Operation Power Supply 12VDC, 0.5 Amp (North America) Status LEDs 12VDC, 0.41 Amp (Europe, Japan, Latin America) The SFMFF4040-100 optical line converter is designed to operate without user 12VDC, 1.25 Amp (UK, Australia, New Zealand, South Africa) intervention. Use the status LEDs to view the operation of the converter in the Environment Tmra*: -10° to 60°C (14° to 185°F) network. Storage Temp: -40° to 85°C (14° to 185°F) Humidity: 5 to 95%

Resumen del contenido incluido en la página 4

SFMFF4040-100 Troubleshooting Contact Us If the SFMFF4040-100 converter fails, isolate and correct the failure by Technical support determining the answers to the following questions and taking the indicated Technical support is available 24 hours a day. action: US and Canada: 1-800-260-1312 International: 00-1-952-941-7600 1. Is the PWR (power) LED illuminated? Transition now NO Chat live via the Web with Transition Networks Technical Support. � Ensure that the power adapter is the proper type

Resumen del contenido incluido en la página 5

Compliance Information CISPR22/EN55022 Class A + EN55024; CE Mark FCC regulations This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructio