Manual de instrucciones de Tripp Lite SMART2200NET

Resumen del contenido incluido en la página 1

Tripp Lite

1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
Model #: SMART2200NET
Smart Pro UPS System - Intelligent, line-interactive battery backup for network and telecommunications
System

Highlights
2200VA / 2.2kVA line interactive, extended-run tower UPS
Maintains 120V nominal output over an input range of 87 to 140V
Network communications supported via 3 DB9 ports (1 serial / 2 contact
closure)
Input: NEMA 5-15P (120V 15A) / Output

Resumen del contenido incluido en la página 2

Automatic Voltage Regulation (AVR) circuits maintain 120V nominal output over an input voltage range of 87-140V Includes 6 fully protected NEMA 5-15R outlets with 2 single outlet load banks that can be individually powered off and back on again via software interface PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, email notification, event logging and running user defined script commands Offers simultaneous monitoring of up to 3 direct

Resumen del contenido incluido en la página 3

Overvoltage Input voltages between 127 and 140V AC are reduced by 12% correction Direct pass through Input voltages between 110 and 127V AC are passed through unchanged Brownout correction Input voltages between 95 and 105V AC are boosted by 10% Severe brownout Input voltages between 87 and 94V AC are boosted by 22% correction LEDS ALARMS & SWITCHES Front panel LEDs Includes 5 front panel LEDs to indicate BATTERY CHARGE LEVEL, AC LINE POWER STATUS, VOLTAGE REGULATION STATUS, UPS LOAD LEVEL and B

Resumen del contenido incluido en la página 4

Network monitoring Includes 3 built-in DB9 monitoring ports, 1 enabled with RS-232 data communications and 2 with standard contact port closure communications. All interfaces support on battery, low battery and power restored messaging. RS-232 enabled port adds data regarding AC Software and cabling Includes PowerAlert UPS monitoring software for all common network and standalone operating systems. included LINE / BATTERY TRANSFER Transfer time from 2-4 milliseconds line power to battery mode Lo

Resumen del contenido incluido en la página 5

More information, including related products, owner's manuals, and additional technical specifications, can be found online at www.tripplite.com/en/products/model.cfm?txtModelID=40. ©2009 Tripp Lite. All Rights Reserved.