Resumen del contenido incluido en la página 1
â â
EPSON
Programming Guide
For
6 Color
EPSON Stylus Pro 7000
(PM-7000C)
(Level I)
EPSON Imaging Technology Center Page: 1
Revision: 1 (Date: 6/20/00)
Resumen del contenido incluido en la página 2
All Rights Reserved. This publication may only be used for the purposes of research and development of products and services enhancing, enabling, or facilitating existing and future products and services bearing the EPSON trademark, and for providing support to those engaging or intending to engage in such activities. All other uses are unauthorized. No part of this publication may be reproduced, stored in any retrieval system, or transmitted in any form or by any means without the p
Resumen del contenido incluido en la página 3
TABLE OF CONTENTS: CHAPTER 1: INTRODUCTION .............................................................................................................6 1.1 EPSON Stylus Pro 7000...............................................................................................................................................6 CHAPTER 2: PAPER TYPES AND SIZES....................................................................................9 2.1 EPSON Paper Types and Sizes for the Stylus Pr
Resumen del contenido incluido en la página 4
6.9 Set Resolution of Raster image “ESC (D nL nH rL rH v h”..................................................................................... 32 6.10 Set Absolute Vertical Print Position “ESC (V nL nH m1 m2 m3 m4 ”.............................................................. 34 6.11 Set Relative Vertical Print Position “ESC (v nL nH m1 m2 m3 m4”.................................................................. 35 6.12 Set Absolute Horizontal Print Position “ESC ( $ nL nH m1 m2 m3 m4”.
Resumen del contenido incluido en la página 5
LIST OF TABLES: Table 1: The EPSON Stylus Pro 7000 Printer Feature Summary...................................................................... 7 Table 2: Stylus Pro 7000 Throughput.................................................................................................................. 8 Table 3: EPSON Paper Types and Sizes for Stylus Pro 7000 ............................................................................. 9 Table 4: Characteristic Information for Each Paper T
Resumen del contenido incluido en la página 6
This Programming Guide is intended for use in conjunction with the EPSON Standard ESC/P Reference Manual (December 1997) CHAPTER 1: INTRODUCTION This section of the Programming Guide will provide a technical overview of another EPSON’s 6- color large format inkjet printer to facilitate driver development. 1.1 EPSON Stylus Pro 7000 The Stylus Pro 7000 is the follow-up to the six-color large format inkjet printer Stylus Pro 9000 introduced by EPSON. The Stylus Pro 7000, a large forma
Resumen del contenido incluido en la página 7
Table 1: The EPSON Stylus Pro 7000 Printer Feature Summary EPSON Stylus Pro 7000 Print Head 64 black nozzles, 320 color nozzles, 64 nozzles x 3 (CMYLcLm). Same head as Stylus Pro 5000. Interface (s) Parallel, USB and Optional Ethernet Printer ESC/P Raster & Language Remote Mode Resolution 1440(h) x 720(v) Max (dpi) Selectable dot Yes size Ink Type **CMYKLcLm Paper type vs. Resolution Matte Paper ****360, 720 (Roll) Photo Quality ****36
Resumen del contenido incluido en la página 8
Table 2: Stylus Pro 7000 Throughput Throughput A1 Print Time Resolution Print Mode 5 Min. 360dpi x 360dpi Bi-D printing Microweave mode 200cps 8 Min 720dpi x 360dpi Bi-D printing Full overlap mode 300cps 15 Min 720dpi x 720dpi Bi-D printing Full overlap mode 300cps 28 Min 1440dpi x 720dpi Bi-D printing 4 pass 300cps EPSON Imaging Technology Center Page: 8 Revision: 1 (Date: 6/20/00)
Resumen del contenido incluido en la página 9
Stylus Pro 7000 CHAPTER 2: PAPER TYPES AND SIZES 2.1 EPSON Paper Types and Sizes for the Stylus Pro 7000 In addition to the standard plain paper, EPSON provides special paper type in the following sizes: Table 3: EPSON Paper Types and Sizes for Stylus Pro 7000 Paper Size in Paper Size in “mm” Product Code Paper Type/ “inch” Number Subset (U.S.) Plain Paper (Cut sheet) Letter 8.5x11 216x279 √ US B √ 11x17 US C √ 17x22 US D 22x34 √ A4 8.3x11.7
Resumen del contenido incluido en la página 10
Stylus Pro 7000 Table 3: EPSON Paper Types and Sizes for Stylus Pro 7000 - Cont’d Paper Size in Paper Size in “mm” Product Code Paper Type/ “inch” Number Subset (U.S.) *EPSON SEMI GLOSS PAPER – HEAVY WEIGHT (Roll) (Thickness: 0.2mm) SEMI GLOSS √ 24”x82’ 604mm x 25m PAPER - HEAVY WEIGHT *EPSON GLOSSY PAPER – HEAVY WEIGHT (Roll) (Thickness: 0.2mm) GLOSSY PAPER 24”x67.9’ 604mm x 20.7m √ GLOSSY PAPER √ 12.95”x32.81’ 329mm x 10m GLOSSY PAPER √ 8.27”x32.81’ 210m
Resumen del contenido incluido en la página 11
* These names are for U.S. market only. The Worldwide names for these media “Semigloss Photo Paper- Heavy Weight (Roll)” and “Glossy Photo Paper- Heavy Weight (Roll)” respectively. **The surface of Poster Board – Semigloss is same as Semi Gloss Paper-Heavy Weight. Therefore, with the Poster Board media the “Semi Gloss Paper- Heavy Weight” print mode is used. Note: For Roll Paper - The left, right, top and bottom margins of the Stylus Pro 7000 is 3mm, (42 dots). For Cut Sh
Resumen del contenido incluido en la página 12
2.2 Paper Type subject to Path & Page Delay, Cutter Auto OFF Paper Type Path Delay Page Delay Auto Cutter OFF ms S Plain Paper 0 0 - Presentation Matte Paper 0 0 - Glossy Paper-Heavy Weight 0 0 - Semi Gloss Paper-Heavy 0 0 - Weight Photo Quality Ink Jet Paper 0 0 - Photo Paper 0 0 - Photo Quality Glossy Film 0 0 - Poster Board -Semigloss 0 0 OFF Note: If Cut Sheet is selected, Auto Cutter ON can’t be selected. 2.3 Paper Weight EPSON INK JET MEDIA SPECIFICATION TABLE Ba
Resumen del contenido incluido en la página 13
2.4 Characteristic Information for Each Paper Type Mechanism sequence setting, cutter On/Off information, drying time, and paper thickness are following as characteristic information (TBD) Table 4: Characteristic Information for Each Paper Type – ROLL Paper 1.1.1. Set mechanism sequence 1.1.3. Set auto cut 1.1.5. Set drying time 1.1.9. Set paper thickness Paper type SN 03H 00H 00H 01H AC 02H 00H 00h DR 04H 00H 00H 00H PH 02H 00H 00H Plain Paper 00H(Cutter Of
Resumen del contenido incluido en la página 14
CHAPTER 3: PRINTABLE AREAS 3.1 Printable Area – Stylus Pro 7000 Roll Paper d a b c d e a b c e f f Table 6: Printable Area for the EPSON Stylus Pro 7000 – Roll Paper Paper type a b c d e f “Units are in dots Left Printable Right Top Printable Bottom where 1 dot = 1/
Resumen del contenido incluido en la página 15
3.2 Printable Area – Stylus Pro 7000 Cut Sheet Paper d a b c d e a b c e f f Table 7: Printable Area for the EPSON Stylus Pro 7000 – Cut Sheet Paper type a b c d e f “Units are in dots Left Printable Right Top Printable Bottom where 1 dot = 1/360” Margin Width Margin
Resumen del contenido incluido en la página 16
Notes: Left and top Margins: 42 dots (3mm) for both roll paper and cut sheet. Bottom Margin; 42 dots for roll paper, 198 dots (14mm) for cut sheet. (Unit: 360 dpi) The maximum printing width is 604mm. (= 24 inch - 3 mm- 3 mm) The Minimum and Maximum Printing Width for the Roll Paper is 176mm~604mm. The Maximum Printing Height for the Roll Paper is 25m. The Minimum and Maximum Printing Width for the Cut Sheet paper is 176mm~604mm. The Minimum and Maximum Printing Height
Resumen del contenido incluido en la página 17
CHAPTER 4: Printing Mode 4.1 Printing Mode – Stylus Pro 7000 Following table shows ink duty and printing mode for each Media type, Resolution, MicroWeave, Dot Control and Bi-directional ( High Speed) for the EPSON Stylus Pro 7000. These printing modes use the printer MicroWeave. If you do not use the printer MicroWeave, then the command parameters are different. Table 8: Printing mode for the EPSON Stylus Pro 7000 Media type Input Bi-D Resolution M/W Setting Resolution Setting
Resumen del contenido incluido en la página 18
Table 9: Recommended Printer Driver Settings for the EPSON Stylus Pro 7000 Media Media Type Printer Driver Mode Plain Paper Plain Paper Presentation Matte Paper Presentation Matte Paper *GLOSSY PAPER-HEAVY WEIGHT Photo Paper *SEMI GLOSS PAPER- HEAVY WEIGHT Semi Gloss Photo Paper Poster Board-Semigloss Semigloss Photo Paper Glossy Film Roll Glossy Film Photo Glossy Paper Photo Quality Glossy Film Backlight Film Photo Quality Glossy Film These names are for U.S. market only. The
Resumen del contenido incluido en la página 19
CHAPTER 5: COMMAND SEQUENCE FLOW 5.1 Raster Graphics Mode The Raster graphics command controls the following two modes. 1) Non-compressed mode Print data are transferred without compression. This is effective especially for photographs and other data, which yield only a low compression ratio. 2) RLL compression mode Print data are compressed using RLL (run-length limited) compression. This is effective for data with repeated patterns, such as graphics and illustrations.
Resumen del contenido incluido en la página 20
5.2 Command Transfer Sequence The basic commands and command sequence for use with non-compressed mode and RLL compression mode are shown below. Command setting procedure for Non compression mode and Run-length compression mode Table 11: Command sequence flow Forward Setting Items Command cycle Document Unit 1.Initial Setting 1.1 Set remote mode ESC (R 1.1.1 Set Mechanisim Seq. SN 1.1.2 Set paper path PP 1.1.3 Set auto cutting state AC m1=00H, 01H, or 02H 1.1.4 Set no paper
