Manual de instrucciones de Fujitsu FTP-624MCL303

Resumen del contenido incluido en la página 1

BATTERY DRIVE, MICRO LINE THERMAL PRINTER
2” TYPE MECHANISM AND INTERFACE BOARD
WITH MINIATURE CUTTER
FTP-624MCL303/304/FTP-624DSL113
n OVERVIEW
FTP-624MCL303/304 is a high speed, battery driven thermal
printer with a miniature cutter, printing on 2-inch wide paper
(58mm/60mm). A newly developed, long life, compact, light
weight cutter has been partnered with a FTP-624MCL
mechanism to produce this new product.
The design allows easy maintenance, head cleaning, head
replacement, and cutter repla

Resumen del contenido incluido en la página 2

FTP-624MCL303/304/FTP-624DSL113 n DESIGNATION Item Part number 1 Printer mechanism FTP-624MCL303/304* 2 Interface board (Centronics /RS-232C) FTP624DSL113* LSI Micro Controller Unit FTP-624CU112 Thermal head cable FTP-624Y001 Parallel interface cable FTP-441Y201 Cables Serial interface cable FTP-624Y301 Power cables FTP-621Y401 FTP-621Y601 *1: 303 is for front paper insertion (curl path) and 304 is for rear paper insertion (straight path). *2: Includes ANK+Kanji and Flash Memory. n GENERAL SPECI

Resumen del contenido incluido en la página 3

FTP-624MCL303/304/FTP-624DSL113 (Continued) Item Specifications Voltage: 4.2-8.5 VDC For head Peak current: approx. 2.6 A (conditions: room temp., 7.2 VDC, 64 dots on) Voltage: 4.2-8.5 VDC For motor Peak current: approx. 0.8 A (conditions: room temperature, 7.2 VDC) Power Voltage: 5.0 VDC ± 5% For logic supply Current: 0.2 A maximum For cutter Voltage: 5.0 VDC ± 5% Current: Approximately 5.0A (in-rush) Approximately 1.0A (average) Mechanism 97 (W) × 57 (D) × 38 (H) mm Dimensions

Resumen del contenido incluido en la página 4

FTP-624MCL303/304/FTP-624DSL113 n DIMENSIONS Printer mechanism Unit: mm 4 (Motor) (Sensor)

Resumen del contenido incluido en la página 5

FTP-624MCL303/304/FTP-624DSL113 Interface board 130.8 120.7 105.4 71.1 33.0 5.1 15.2 5.1 CN9 CN10 CN6 CN5 4-ø3.6 CN3 CN11 CN1 CN2 CN4 56.7 5.1 5.1 69.9 86.4 105.4 120.7 17.0 Mounting height 23.6 1.6 5.0 Mounting height Unit: mm 5 88.9 78.7 39.4 5.1 5.1 CN8 39.4 5.1 5.1

Resumen del contenido incluido en la página 6

FTP-624MCL303/304/FTP-624DSL113 n CONNECTOR PIN ASSIGNMENT FOR PRINTER MECHANISM 1. Thermal Head Head side : B16B-PH-K-S-2.2 (J.S.T.) or equivalent Board side : PHR-16 (J.S.T.) or equivalent *1: Symbol: " " means a negative logic signal Thermal head heat sink Head up level Motor 1, 2, 3, ......................................15, 16 Connector Pin No. 2. Motor connectors 3. Sensor connectors Motor side : PHR-4 (J.S.T.) or equivalent Sensor : PHR-5 (J.S.T.) or equivalent Board side

Resumen del contenido incluido en la página 7

FTP-624MCL303/304/FTP-624DSL113 3. Cutter Mech side : EHR-4 (J.S.T.) or equivalent Board side : B4B-EH (J.S.T.) or equivalent n FUNCTION Im tem Ite 1n.T. estprintfunctio 8nCutterabnormalitydetectio 2n.P. aperoutdetectio 9nMotorpowersavingfunctio 3n.P. apernearenddetectio 1n0Markdetectionfunctio 4n.H. eadupdetectio 1n1MCUoperationabnormalitydetectio Thermalheadtemperatureabnormality 5. 1n2.PowerON/OFFsequenceprotectio detection 6n.B. low-outfusedetectio 1n3Motorover-currentprotectio 7n .H.