Manual de instrucciones de IBM 4100

Resumen del contenido incluido en la página 1

Table Of Contents

Infoprint 4100-HD1/HD2 and 4100-PD1/PD2 Printers (4100-HD1/HD2 and 4100-PD1/PD2)
Printable Area
Media Specifications
Attachments

Previous Page | Next Page Contents Glossary Index IBM Printing Systems Printers >
Infoprint 4100-HD1/HD2 and 4100-PD1/PD2 Printers (4100-HD1/HD2 and
4100-PD1/PD2)
This chapter describes Infoprint 4100-HD1/HD2 and Infoprint 4100-PD1/PD2 printer characteristics. The Infoprint 4100-
HD1/HD2 and 4100-PD1/PD2 printers are channel-attached or LAN-attach

Resumen del contenido incluido en la página 2

Datastreams IPDS Form type Continuous Number of input bins Up to 16 inch (406 mm) stack of paper (box) Number of output bins Up to 14 inch (356 mm) stack of paper Finisher attachment n/a Manual forms feed n/a Envelope printing n/a 1 MICR printing yes Duplex printing yes 1 Color yes Adjust print-quality levels yes Print resolution 480 dpi 600 dpi Maximum printing rates for letter (8.5 x 11 inches) inches per second 35 inches per minute 2100 2 Maximum printing rates for letter in pages per mi

Resumen del contenido incluido en la página 3

Previous Page | Next Page Contents Glossary Index IBM Printing Systems Printers > Infoprint 4100-HD1/HD2 and 4100-PD1/PD2 Printers (4100-HD1/HD2 and 4100-PD1/PD2) > Printable Area The printer can print to the horizontal page perforations and within ½-inch (12.7 mm) of either vertical (tractor hole) edge of the form. See Figure 46. With tractorless paper, the printer can print to ½-inch (12.7 mm) from either edge of the form without print quality degradation. Print quality may be degraded when pr

Resumen del contenido incluido en la página 4

Media weights: The following paper weights are supported: Duplex pinless for Infoprint 4100-PD1/PD2 supports paper weights between 12 and 28 pounds (45 and 105 gsm) bond are supported. Post-processing equipment is required for paper weights less than 16 pounds. Duplex pinless for Infoprint 4100-HD1/HD2 supports paper weights between 12 and 42 pounds (45 and 157.5 gsm) bond are supported. Post-processing equipment is required for paper weights less than 16 pounds. Duplex pinfeed for Infoprint 410

Resumen del contenido incluido en la página 5

selected RS/6000 and AS/400 models. The Infoprint 4100-HD1/HD2 -PD1/PD2 printer is connected to the host Token- Ring through the IBM Token-Ring cabling via the Token Ring High-performance adapter, which is contained in the AFCCU. The control unit can be attached to either a 16Mbit/sec or a 4Mbit/sec Token-Ring LAN. The TCP/IP Token- Ring Attachment will attach to the following devices: 8228 Token Ring Multistation Access Unit attached to an AS/400 or RS/6000 processor 8230 Token Ring Network Con