Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
CONTENTS SAFETY PRECAUTIONS ....................................... 2 ADJUSTING THE DIRECTION OF FEATURES AND FUNCTIONS .............................. 3 AIR CIRCULATION ............................................... 11 NAME OF PARTS ................................................... 4 SWING OPERATION ............................................ 12 PREPARATION ....................................................... 6 ENERGY SAVE OPERATION ............................... 13 OPERATION ...........
Resumen del contenido incluido en la página 3
FEATURES AND FUNCTIONS AUTOMATIC OPERATION l COOLING MODEL Merely press the START/STOP button, and the unit will begin automatic operation in the Cooling or Dry mode as appropriate, in accordance with the thermostat setting and the actual temperature of the room. l HEAT & COOL MODEL (REVERSE CYCLE) Merely press the START/STOP button, and the unit will begin automatic operation in either the Heating, Cooling or Monitor modes as appropriate, in accordance with the thermostat setting and the actual
Resumen del contenido incluido en la página 4
NAME OF PARTS Instructions relating to heating(*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). Fig. 1 1 7 6 5 4 9 0 MANUAL AUTO SWING SWING TIMER OPERATION 3 2 Fig. 2 8 Fig. 4 A Electrical Breaker A B This breaker is installed during the electrical installation. Fig. 3 Fig. 5 F SLEEP TIMER Q C G CLOCK R AUTO COOL MASTER SET SET FAN CLOCK TIMER SLEEP CONTROL TEMP . TIME CONTROL AM ON S U D H PM HM OFF OFF ON TIMER RESET ENERGY SAVE A START AUTO AUTO E STOP I V COOL HIGH DRY MED
Resumen del contenido incluido en la página 5
Fig. 1 Indoor Unit Fig. 5 Remote Control Unit 1 Operating Control Panel (Fig. 2) C SLEEP Button 2 MANUAL AUTO button D MASTER CONTROL Button 3 Remote Control Signal Receiver E SET TEMP./SET TIME Buttons ( ) 4 OPERATION Indicator Light (red) F Signal Transmitter 5 TIMER Indicator Light (green) G TIMER Button 6 SWING Indicator Light (orange) H FAN CONTROL Button (HORIZONTAL SWING) I START/STOP Button 7 SWING Indicator Light (orange) J Battery compartment lid (VERTICAL SWING) Inside of the batter
Resumen del contenido incluido en la página 6
PREPARATION CAUTION! Load Batteries (R03/LR03/AAA× 4) l Take care to prevent infants from accidentally swallowing batteries. Press and slide the battery compartment lid to open it. l When not using the remote control unit 1 for an extended period, remove the batteries to avoid possible leakage and damage to the unit. Insert batteries. l If leaking battery fluid comes in contact 2 Be sure to align the battery polarities ( ) correctly. with your skin, eyes, or mouth, immedi- ately wash with copio
Resumen del contenido incluido en la página 7
OPERATION Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). To Select Mode Operation SLEEP TIMER Press the START/STOP button. 1 The indoor unit’s OPERATION indicator light (red) will be on. The air conditioner will start operating. COOL Press the MASTER CONTROL button to select the de- 2 sired mode. MASTER SET SET FAN CONTROL TEMP . TIME CONTROL Each time the button is pressed, the mode will change in the following order. cc c AUTO COOL DRY d STA
Resumen del contenido incluido en la página 8
OPERATION Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). About Mode Operation AUTO: COOLING MODEL l When the room temperature is 4 °F Cooling Operation higher than the set temperature, the mode will switch between Cooling and Drying. Dry Operation Thermostat control l During the Drying mode operation, the FAN setting should be switched to LOW for a gently cooling effect during which the fan may temporarily stop rotating. 4 °F l If the mode automa
Resumen del contenido incluido en la página 9
TIMER OPERATION Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). Before using the timer function, be sure that the remote control unit is set to the current time (See page 6). To Use the ON timer or OFF timer SLEEP TIMER Press the START/STOP button TIMER ON 1 (if the unit is already operating, proceed to step 2). The indoor unit’s OPERATION indicator light (red) will turn on. MASTER SET SET FAN CONTROL TEMP . TIME CONTROL Press the TIMER button
Resumen del contenido incluido en la página 10
TIMER OPERATION About the PROGRAM timer About the ON timer l The PROGRAM timer allows you to integrate OFF timer l The timer function is designed to bring your room to a and ON timer operations in a single sequence. The se- comfortable temperature by the set time; as a result, the quence can involve one transition from OFF timer to ON unit automatically begins operation before the set time timer, or from ON timer to OFF timer, within a twenty- so that the room reaches the desired temperature by
Resumen del contenido incluido en la página 11
ADJUSTING THE DIRECTION OF AIR CIRCULATION Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). Vertical (up-down) direction of airflow is adjusted by pressing the remote control unit’s AIR FLOW DIRECTION VERTICAL SET button. Horizontal (right-left) direction of airflow is adjusted by pressing the remote control unit’s AIR FLOW DIRECTION HORIZONTAL SET button. DANGER! Vertical Air Direction Adjustment Never place fingers or foreign objects inside Pres
Resumen del contenido incluido en la página 12
SWING OPERATION Begin air conditioner operation before performing this procedure To select Vertical airflow SWING Operation Press the AIR FLOW DIRECTION VERTICAL SWING button . SET SWING SET SWING The SWING indicator light (VERTICAL SWING) (orange) will turn on. TIME TEST In this mode, the UP/DOWN air direction flap will swing automatically to direct the ENERGYADJUST RUN ACL SAVE air flow both up and down. To Stop Vertical airflow SWING Operation Example: When set to vertical swing Press the AI
Resumen del contenido incluido en la página 13
ENERGY SAVE OPERATION Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). The air conditioner can be operated while keeping energy consumption costs down. How To Use the ENERGY SAVE OPERATION SET SWING SET SWING Press the START/STOP button 1 (if the unit is already operating, proceed to step 2). TIME TEST ENERGYADJUST RUN ACL SAVE The indoor unit’s OPERATION indicator light (red) will turn on. Press the MASTER CONTROL button to select the 2 COOL, DRY
Resumen del contenido incluido en la página 14
CLEANING AND CARE l Before cleaning the air conditioner, be sure to turn it off and disconnect the power supply. CAUTION! l Turn off the electrical breaker. Cleaning the Air Filter 3. Re-attach the air filters to the intake grille. 1. Pull the air filters upward to remove them. Remove the air filters by raising its handle while pulling The air filters fit onto the inside of the intake grille. it out towards you. l Dust can be cleaned from the air filter either with a vacuum cleaner, or by washi
Resumen del contenido incluido en la página 15
TROUBLESHOOTING Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). In the event of a malfunction (burning smell, etc.), immediately stop operation, turn off the elec- WARNING! trical breaker, and consult authorized service personnel. Merely turning off the unit’s power switch will not completely disconnect the unit from the power source. Always be sure to turn off the electrical breaker to ensure that power is completely off. Before requesting servic
Resumen del contenido incluido en la página 16
TROUBLESHOOTING Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). Symptom Items to check See Page CHECK ONCE Doesn’t operate at all: l Is the power supply plug disconnected from its outlet? MORE l Has there been a power failure? — l Has a fuse blown out, or a circuit breaker been tripped? l Is the timer operating? 9 to 10 Poor Cooling (or *Heating) l Is the air filter dirty? performance: l Is the air conditioner’s intake grille or outlet port blocke
Resumen del contenido incluido en la página 17
OPERATING TIPS AUTO Restart In Event of Power Interruption l Should the power supply to the air conditioner be inter- l Use of other electrical appliances (electric shaver, etc.) or rupted by a power failure, the air conditioner will restart nearby use of a wireless radio transmitter may cause the automatically in the previously selected mode once the air conditioner to malfunction. In this event, temporarily power is restored. disconnect the power supply, reconnect it, and then use the remote c
Resumen del contenido incluido en la página 18
