Resumen del contenido incluido en la página 1
OWNER’S MANUAL
3LCD DATA PROJECTOR
TLP-S10 (SVGA)
Others Maintenance Operations Preparations Before Using
Resumen del contenido incluido en la página 2
Before Using SAFETY PRECAUTIONS IMPORTANT SAFETY INSTRUCTIONS The lightning flash with arrowhead symbol, within CAUTION:PLEASE READ AND OBSERVE ALL WARNINGS AND an equilateral triangle, is intended to alert the user INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND THOSE to the presence of uninsulated "dangerous voltage" MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE within the product's enclosure that may be of REFERENCE. sufficient magnitude to constitute a risk of electric This set has been
Resumen del contenido incluido en la página 3
IMPORTANT SAFETY INSTRUCTIONS (Continued) 5. Heat 8. Power-Cord Protection 11. Object and Liquid Entry 14. Attachments The product should be situated Power-supply cords should be Never push objects of any kind Do not use attachments not away from heat sources such as routed so that they are not likely to into this product through openings recommended by the product radiators, heat registers, stoves, or be walked on or pinched by items as they may touch dangerous manufacturer as they may cause o
Resumen del contenido incluido en la página 4
IMPORTANT SAFETY INSTRUCTIONS (Continued) 16. Damage Requiring Service 18. Servicing 21. Do not leave thermal- Unplug this product from the wall Do not attempt to service this paper documents or easily outlet and refer servicing to product yourself as opening or deformed items on top of qualified service personnel under removing covers may expose you the unit or near the air the following conditions: to dangerous voltage or other exhaust for long periods a) When the power-supply cord or hazards
Resumen del contenido incluido en la página 5
LABEL LOCATIONS POWER SUPPLY CORD SELECTION If your line voltage is 220 to 240V, use one of the following types of cable. Plug Plug MODEL NO. / configuration Plug type Line voltage configuration Plug type Line voltage RATING Label Australian 200 – 240V WARNING Label EURO 220 – 240V 240V 10A Switzerland 200 – 240V UK 220 – 240V 240V 6A Use a 5A fuse which is approved by ASTA SERIAL NO. Label North American 200 – 240V MANUFACTURED; or BSI to BSI362. 240V SERIAL NO. Always replace the fuse cover a
Resumen del contenido incluido en la página 6
IMPORTANT PRECAUTIONS (Continued) EXEMPTION CLAUSES • Toshiba Corporation bears no responsibility in the case of damages arising from natural Avoid Volatile Liquid disaster such as earthquakes, lightning, etc., fire not liable to Toshiba Corporation, Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or operating by third parties, other accidents, or use under abnormal conditions including plastic products touching the unit for a long time. They will leav
Resumen del contenido incluido en la página 7
CONTENTS Before Using Others SAFETY PRECAUTIONS ................................................................................ 2 Trouble indications ......................................................................................... 35 IMPORTANT SAFETY INSTRUCTIONS ......................................................... 3 Before calling service personnel .................................................................... 36 LABEL LOCATIONS .............................................
Resumen del contenido incluido en la página 8
Preparations Checking the package contents Names of each part on the main unit Please make sure that the following items are included in the box, along with the main unit. If (4) (3) (2) (1) (10) any item is missing, please contact the store immediately where you purchased the product. (4) (1) (4) (7) (9) (5) (8) (2) (5) (8) (5) (6) (7) (1) (11)(12)(13) (11) (14)(15)(16)(17)(18)(19) (3) (6) (9) COMPUTER- VIDEO AUDIO MONITOR ( Y/PB/PR ) VIDEO S-VIDEO CONTROL (10) (See note) (1) Remote control
Resumen del contenido incluido en la página 9
Approx. 5m Approx. 5m Names of each part on the control panel and remote control Preparing and using the remote control Control panel Remote Control Loading dry-cell batteries Operating the remote into the remote control control CLASS 1 LED PRODUCT Remote control transmitter q Remove the battery cover. Point the remote control toward the projector’s infrared remote sensor, ON/ STANDBY CALL and press a button on the remote (1) (15) KEYSTONE AUTOSET control. (3) (4) • Operating the projector f
Resumen del contenido incluido en la página 10
Placement Connection Placement Styles Before connection As shown in the figures below, this device can be placed in 4 different styles. • Read the owner’s manual of the device to connect to the projector. The factory setting is “floor-mounted front projection.” Set the placement style in the • Some types of computer cannot be used or connected to this projector. p.30 p.38 default setting menu , in accordance with your needs. Check for an RGB output terminal, supported signal , etc. • Turn off th
Resumen del contenido incluido en la página 11
Operations Turning the power on and off Connecting the power cord Turning the power off Insert the power cord connector into the AC IN socket of the projector. 1 1 Press the ON/STANDBY button. A message appears on the screen, confirming that you wish to shut off the power. This Insert the power cord plug into a wall or other power outlet. 2 message will disappear after a moment. (This operation is no longer valid after the When the power cord is plugged in, the following message disappears.) thr
Resumen del contenido incluido en la página 12
Basic operations 5 Turn on the power. Projector placement angle adjustments 1 p.20 Turn on the power by following the instructions in “Turning on the power” . The placement angle and the height of the projected image can be adjusted by the foot adjuster. 2 Select the language and the lamp power (When using the 1 q Lift up the front of the projector to first time). the desired angle, then press the foot adjuster release button. When the projector is used for the first time after purchase, menu fo
Resumen del contenido incluido en la página 13
Using handy features Using auto setting (Auto setting) Correcting the keystone distortion (Keystone) p.23 This function sets up the projector to the optimum state for When the foot adjuster is used to change the Remote Control panel each type of the input signal by using simple operations. Control projection angle, the picture will undergo keystone (trap- Remote FAN TEMP LAMP ON ON/ STANDBY CALL Control panel Control ezoidal) distortion. 1 Press the AUTO SET button. INPUT ON / STANDBY KEYST
Resumen del contenido incluido en la página 14
Using handy features (Continued) Cutting off the picture and sound temporarily (Mute) Enlarging the picture size (Resize) When you want to project the images of another projector, overhead The image being projected can be enlarged. projector, etc. temporarily, this projector’s images and sound can be 1 Press the remote control’s RESIZE button. turned off. The enlargement ratio is increased each time the RESIZE button is pressed. Remote Press the remote control’s MUTE button. Control The pi
Resumen del contenido incluido en la página 15
Using handy features (Continued) Using the menus You can call up on-screen menus, and conduct a number of adjustments and settings using Displaying Information [Status display] p.16 the operation buttons on the control panel (main unit side) and remote control. This displays information about the input signal, lamp use time, etc. Press the button twice (or press the CALL button on the remote How to use the menus control once). The menu shown below is only for operation instructions and mig
Resumen del contenido incluido en la página 16
Using the menu (Continued) The display setting menu The image adjustment menu Use this menu to adjust image-related items. Use this menu to set screen display-related items. Items that can be adjusted are marked with “Yes”, and those that cannot are marked with “No”. Description Item Item Description Computer Y/PB/PR Video S-video Screen size Contrast Lower Higher Yes Y es Yes Y es (Full): Display with LCD panel’s resolution Brightness Darker Brighter Yes Y es Yes Y es (Thru): Display wi
Resumen del contenido incluido en la página 17
Maintenance Air filter cleaning Lens and main unit cleaning The air filter prevents dust and debris from getting inside the projector. Never run the WARNING projector with the filter removed. It is recommended that the air filter is cleaned regularly. • The icon message “Check the air filter for dirt.” is displayed every 100 hours. (If the • Request cleaning and maintenance of a ceiling-mounted unit from your projector usage time exceeds 100 hours, this message is displayed for 30 seconds when
Resumen del contenido incluido en la página 18
Others Lamp replacement (Continued) Trouble indications The indicator lights inform you of internal abnormalities. Remove the lamp cover. 3 1 FAN TEMP LAMP ON Loosen the 2 screws, then pull up to the 3 No power direction of the arrow with your fingers on the ⇒ Problem with projector (Off) area shown in the figure to remove the lamp • Unplug the power cord, and contact your dealer. cover. 2 FAN TEMP LAMP ON Lamp went out during use, or won’t come on ⇒ Lamp temperature is high so that it is diffic
Resumen del contenido incluido en la página 19
Before calling service personnel Specifications If you think something is wrong, check the followings before contacting customer service. List of general specifications p.35 Please see “Trouble indications” as well. Item Specification If This Happens Check Consumption Power 220 W Weight 2.2 kg • Is the power cord plugged in? Is it connected to the projector? No power p.35 External Dimensions 303 × 84 × 206 mm (W × H × D) • Is the lamp cover loose? (including protruding parts) p.35 • Is the
Resumen del contenido incluido en la página 20
Specifications (Continued) List of supported signals (RGB signals) List of supported signals (Y/PB/PR signals) This projector supports the following RGB signals. Note, however, that depending on the Signal format fh(kHz) fv(Hz) computer model, the screen may show flicker or streaking. Please adjust the projector if 480i(525i)@60Hz 15.73 59.94 this happens. 480p(525p)@60Hz 31.47 59.94 p.24 (Press the AUTO SET button, and adjust automatically or manually. ) 576i(625i)@50Hz 15.63 50.00 576p(6
