Resumen del contenido incluido en la página 1
Table of contents/Safety Instructions
Before Use
MULTIMEDIA PROJECTOR
Setting Up the Projector
Projecting an Image from the Computer
Projecting an Image from AV Equipment
User’s Manual
Useful Functions Available During a Presentation
Setting Up Functions from Menus
Maintenance
Troubleshooting
Appendix
Index
Resumen del contenido incluido en la página 2
Quick Reference – How to start projection Computer 1. Install the projector. P30-31 Install the projector at the desired distance from the screen. 2. Connect the projector. P34-37 Connect the projector and the computer with a cable. 3. Turn on the projector. P38-39 Connect the power cord and turn on the projector. Adjust the height of the projecting image (P41). Select a display language when turning on the projector for the first time (P39). 4. Press the button. P44 Adjust the focus of t
Resumen del contenido incluido en la página 3
AV Equipment 1. Install the projector. P30-31 Install the projector at the desired distance from the screen. Install batteries in the remote control (P27) 2. Connect the projector. P62-66 Connect the projector and the AV equipment with a cable* (see P36, 37 for the instruction on connecting a audio cable). 3. Turn on the projector. P38-39 Connect the power cord and turn on the projector. Adjust the height of the projecting image (P41). Select a display language when turning on the projecto
Resumen del contenido incluido en la página 4
TABLE OF CONTENTS Table of Contents Quick Reference – How to start projection............................................................. 2 Table of Contents................................................................................................... 4 Safety Instructions.................................................................................................. 7 Safety Precautions.....................................................................................................
Resumen del contenido incluido en la página 5
TABLE OF CONTENTS Freezing the Picture ....................................................................................................... 77 Adjusting the Volume ..................................................................................................... 77 Showing the Elapsed Time............................................................................................. 78 Page Up or Down through the Pages .........................................................................
Resumen del contenido incluido en la página 6
TABLE OF CONTENTS Setting Various Function .................................................................................... 107 Setting Auto Setup Function......................................................................................... 107 Selecting the Power Management Mode ..................................................................... 107 Skip the POWER Button Operation .............................................................................. 108 Enabling/Disabling the
Resumen del contenido incluido en la página 7
SAFETY INSTRUCTIONS Safety Instructions Before operating this projector, read this manual thoroughly in order to operate the projector properly. This projector offers many convenient features and functions. Operating the projector properly enables you to manage those features and maintain it in good condition for a long period. Improper operation may result in not only reducing the product-life, but also malfunctions, fire hazards, or other accidents. If your projector is not operating correctl
Resumen del contenido incluido en la página 8
SAFETY INSTRUCTIONS Safety Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This projector projects intense light from the projection lens. Do not stare directly into the lens if possible, as doing so may result in eye damage. Be especially careful that children do not stare directly into the beam. Install the projector in an appropriate position. Installing the projector in an inappropriate position may result in a fire haz
Resumen del contenido incluido en la página 9
SAFETY INSTRUCTIONS READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE. All the safety and operating instructions should be read before beginning to operate the product. Read all of the instructions given here and retain them for later use. Unplug this projector from the AC power supply before cleaning. Do not use liquid or aerosol cleaners on the projector. Use a damp cloth for cleaning. Follow all warnings and instructions marked on the projector. For added protection of the projector during
Resumen del contenido incluido en la página 10
SAFETY INSTRUCTIONS Never push objects of any kind into this projector through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind onto the projector. Do not install the projector near the ventilation duct of air-conditioning equipment. This projector should be operated using only the type of power source indicated on the marking label. If you are not sure of the type of power supplied, consult
Resumen del contenido incluido en la página 11
SAFETY INSTRUCTIONS AC Power Cord Requirement The AC Power Cord supplied with this projector meets the requirements for use in the country you purchased it. AC Power Cord for the United States and Canada: The AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA). Ground The AC Power Cord has a grounding-type AC line plug. This is a safety feature to ensure the plug fits into the power outlet.
Resumen del contenido incluido en la página 12
SAFETY INSTRUCTIONS Federal Communication Commission Notice Multimedia Projector, Model: SX7/SX6/SX60/X700 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to P
Resumen del contenido incluido en la página 13
SAFETY INSTRUCTIONS Lamp Handling Precautions This projector uses a high-pressure mercury lamp which must be handled carefully and correctly as mentioned below. A lamp may explode with a loud sound or burn out due to a shock, scratch, or use beyond its expiry date. The lamp life may differ from lamp to lamp and according to the usage environment. There is no guarantee that all lamps will last for the same period of time. Some lamps may fail in a shorter period of time than other similar lamps.
Resumen del contenido incluido en la página 14
SAFETY INSTRUCTIONS Installation Precautions Ensure that the projector is installed with a minimum distance of 1 m (3.3') from its left, right, rear, and top panels to the neighboring object such as a wall. Installation Install the projector correctly. Incorrect installation may 20° cause troubles and accidents. Do not tilt the projector more than 20 degrees above 20° and below the horizontal. When you want to use your projector pointing up or down, make sure to place the pro- jector straight
Resumen del contenido incluido en la página 15
SAFETY INSTRUCTIONS Features of the Multimedia Projector SX7/SX6/SX60/X700 Thank you for purchasing a Canon projector. The MULTIMEDIA PROJECTOR SX7/SX6/SX60/X700 are high-performance projectors which project the data from the computer and the moving picture from the DVD player to the big screen. Major Features Smooth and Beautiful Imaging Capability Incorporation of AISYS, Canon's unique optical engine, and LCOS (Liquid Crystal On Sili- con) achieves high brightness, high contrast ratio, and sm
Resumen del contenido incluido en la página 16
SAFETY INSTRUCTIONS Supplied Manuals and Symbols Used in This Manual Supplied Manuals User’s Manual (This Document) This is a universal manual for the projector, SX7/SX6/SX60/X700. This manual provides detailed information on how to use the projectors. Read this manual thoroughly to make the most of your projector and ensure safety. Quick Start Guide (Another Document) This guide shows an outline flowchart of the work necessary to start up, adjusting, and turn off the projector. Symbols of Butt
Resumen del contenido incluido en la página 17
Table of contents/Safety Instructions Before Use Setting Up the Projector Projecting an Image from the Computer BEFORE USE Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index
Resumen del contenido incluido en la página 18
BEFORE USE Before Use Supplied Accessories Check whether the following accessories are supplied with the projector. Remote control Batteries (type AAA, two) Computer connection cable for remote control (DVI/Mini D-sub, 15-pin) (1.8m/5.9') [YH7-2052] Power cord (2m/6.6') USB cable (1.8m/5.9') Component cable [YH7-2054] (RCA/Mini D-sub, 15-pin) (0.4m/1.3') [YH7-2084] For Continental Europe For the U.S.A and Canada Carrying bag Lens cap Lens cap strap User’s Manual Quick Start Guide W
Resumen del contenido incluido en la página 19
BEFORE USE Installing the Lens Cap As shown in the illustration on the right, let the lens cap strap through the hole on the lens cap, and then the lens cap strap insertion hole. When the projector is not in use, attach the lens cap to protect the lens from dust and other foreign objects. Putting the Projector in the Carrying Bag As shown in the illustration on the right, put the projector in the carrying bag with its lens faces sideway. Align the lens with the dimple on the cushioning materia
Resumen del contenido incluido en la página 20
BEFORE USE Part Names Main Unit of Projector Front Side Infrared Remote Receiver (P27) Terminals and Connectors Ranging Window Do not place any obstacle between the projector and the screen, as the auto focusing Caution function may fail to operate cor- rectly. Be sure to remove the lens cap during projection. Failure to do so will result in cap deformation Caution or fire hazards. Lens Adjustable Foot Lock Button (P41) Lens Cap (P19) Power Cord Connector (P38) Anti-theft Lock Hole An anti-thef
