Resumen del contenido incluido en la página 1
Epson PowerLite 750c/760c Projector
Projection 3.2 to 39.7 feet (1.0 to 12.1 meters)
Projector Parts
distance
Projection Front, rear, upside-down (ceiling mount)
Zoom ring
Focus ring methods
Internal 1 W monaural
Control panel
sound system
Optical aspect 4:3 (horizontal:vertical)
ratio
Zoom ratio 1:1.2
Noise level 35 dB in Low Brightness mode;
40 dB in High Brightness mode
Exhaust air vent
Keystone Automatic (manual adjustment capability
correction ±30° vertical keystone correction)
Foot adjus
Resumen del contenido incluido en la página 2
Epson PowerLite 750c/760c Projector Safety and Approvals Mode Refresh rate (Hz) Resolution United States FCC 47CFR Part15B Class B (DoC) XGA—60 60 1024 × 768 UL60950 Third Edition XGA—70 70 1024 × 768 XGA—75 75 1024 × 768 Canada ICES-003 Class B XGA—85 85 1024 × 768 CSA C22.2 No. 60950 SXGA1—70 70 1152 × 864* CE Marking Directive 73/23/EEC, 89/336/EEC SXGA1—75 75 1152 × 864* SXGA1—85 85 1152 × 864* IEC 60950 Third Edition EN 55022, EN 55024 SXGA2—60 60 1280 × 960* SXGA2—75 75 1280 × 960
Resumen del contenido incluido en la página 3
Epson PowerLite 750c/760c Projector Use the figure below as a guideline to help you determine how Starting Up the Projector far from the screen to place the projector. Image size generally increases with distance, but may vary depending on how you Make sure your projector and other equipment are set up and position the zoom ring and whether you have adjusted the connected correctly. Then turn on the projector, as described image size with other settings. below. If you turn on your connec
Resumen del contenido incluido en la página 4
Epson PowerLite 750c/760c Projector ® ® If you’re using a Macintosh with OS X: ❏ If you’ve connected a Windows -based computer to the projector, you may see a New Hardware Wizard saying You may need to set up your system to display on the projector your computer has found a plug-and-play monitor; if so, screen as well as the LCD screen. Make sure your computer is click Cancel. connected to the projector, then follow these steps: ❏ If you don’t see the image you want, press the Source 1. Fr
Resumen del contenido incluido en la página 5
Epson PowerLite 750c/760c Projector 3. If the projector isn’t level, rotate the Adjusting the Image back foot on the back of the projector. Once you see your image, you may need to make certain If the image is no longer rectangular after adjustments, as described in this section. raising it, see the next section. Focusing and Zooming Your Image Adjusting the Image Shape Rotate the focus ring to sharpen the image. In most cases, you can maintain a square or rectangular image by placing the p
Resumen del contenido incluido en la página 6
Epson PowerLite 750c/760c Projector ❏ Or press the Menu button, select the Setting menu, and To change the color mode, press the Color Mode button on press Enter. the remote control until you see the mode you want. The currently selected setting appears in the upper right corner of the screen. You can also use the projector menu system to select the Color Mode setting in the Image menu. Correcting Computer Images If you’ve connected a computer and the image doesn’t look right, or it doesn’t
Resumen del contenido incluido en la página 7
Epson PowerLite 750c/760c Projector 4. Highlight ON and press Enter. Using the Remote Control 5. Press Esc or Menu to exit. The setting will take effect the next time you plug in the When using the remote control, stand within 20 feet of the projector. projector. Point the remote control either at the projector or at the screen (the projector’s front sensor can detect signals Note: bounced off the screen). Press the button for the function you When Direct Power On is enabled, shut down the
Resumen del contenido incluido en la página 8
Epson PowerLite 750c/760c Projector Follow these steps to replace the AAA alkaline batteries: Using the Remote Control as a Wireless Mouse 1. Turn the remote control over. When you use the remote control as a wireless mouse, you can 2. Press down on the tab on the battery cover as you lift the control your computer or click through slide show-style cover off. ® ® presentations (such as Microsoft PowerPoint ) from up to 20 feet away. Make sure you have connected the USB mouse cable between
Resumen del contenido incluido en la página 9
Epson PowerLite 750c/760c Projector If you assign a password for the projector, a screen appears The password will be requesting the password whenever you plug in and turn on the displayed as ****. After you projector. If you enter the password incorrectly three times in enter the last digit, a succession, the projector’s operation is locked. Disconnect the confirmation screen appears. projector and reconnect it. If you enter the incorrect password Enter the password again. 30 times in a row
Resumen del contenido incluido en la página 10
Epson PowerLite 750c/760c Projector Starting the Projector with a Password Projector Status Lights Note: You must unplug the projector and then plug it back in to enable The lights on top of the projector indicate the projector’s status password protection. and let you know when a problem occurs. When the password function is enabled, you see this screen when you plug in and turn on the projector: Power light Lamp light Temperature light Hold down the Num button on the remote control as you
Resumen del contenido incluido en la página 11
Epson PowerLite 750c/760c Projector Light Status Description Cleaning the Projector Case Red The projector is overheating, which turns the lamp off automatically. Wait until the Turn off the projector and unplug the power cord before you cooling fan stops, then unplug the power clean the case. cord. Plug the power cord back in and press the P Power button. Make sure the To remove dirt or dust, wipe the case with a soft, dry, room temperature is not above 95 °F lint-free cloth. (35 °C),
Resumen del contenido incluido en la página 12
Epson PowerLite 750c/760c Projector 3. If you need to replace the filter, slide it off as shown. 4. Turn the projector over. Press in on the tabs and lift up the lamp cover. 4. Slide the new air filter until it clicks in place. 5. Loosen the two screws holding the lamp in place (you don’t need to remove them). Replacing the Lamp The projection lamp typically lasts for about 2000 hours of use (in High Brightness mode) or 3000 hours (in Low Brightness mode). It is time to replace the lamp whe
Resumen del contenido incluido en la página 13
Epson PowerLite 750c/760c Projector Resetting the Lamp Timer Optional Accessories You must reset the lamp timer after replacing the lamp to clear the Replace the Lamp message. Epson provides the following optional accessories for the Note: projectors. Do not reset the lamp timer if you have not replaced the lamp. If you do, the Lamp Hours will not accurately reflect the number of Product Part number hours that the lamp has been used. Replacement lamp V13H010L32 1. Connect the power cable a
