Resumen del contenido incluido en la página 1
Table of Contents
SETUP | Security ............................... 40
Table of Contents ............................1
SETUP | Advanced ............................ 42
Usage Notice ...................................2
SETUP | Network ............................... 43
Safety Information ...............................2
OPTIONS ...........................................48
Precautions .........................................3
OPTIONS | Advanced ........................ 50
Eye Safety Warnings ....
Resumen del contenido incluido en la página 2
Usage Notice Safety Information The lightning flash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the
Resumen del contenido incluido en la página 3
Usage Notice Precautions Please follow all warnings, precautions and maintenance as recommended in this user’s guide. ▀■ Warning- Do not look into the projector’s lens when the lamp is on. The bright light may hurt and damage your eyes. ▀■ Warning- To reduce the risk of fire or electric shock, do not expose this projector to rain or moisture. ▀■ Warning- Please do not open or disassemble the projector as this may cause electric shock. ▀■ Warning- When replacing the lamp, please allow the
Resumen del contenido incluido en la página 4
Usage Notice Do: Turn off and unplug the power plug from the AC outlet before cleaning the product. Use a soft dry cloth with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Do not: Block the slots and openings on the unit provided for ventilation. Use abrasive cleaners, waxes or solvents to clean the unit. Use under the following conditions: - In extremely hot, c
Resumen del contenido incluido en la página 5
Usage Notice Eye Safety Warnings ▀■ Avoid staring/facing directly into the projector beam at all times. Keep your back to the beam as much as possible. ▀■ When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen. ▀■ In order to minimize the lamp power, use room blinds to reduce ambient light levels. Product Features ▀■ XGA (1024x768) Native resolution / WXGA (1280x800) Native resolution ▀■ HD compatible – 1080p support
Resumen del contenido incluido en la página 6
Introduction Package Overview Unpack and inspect the box contents to ensure all parts listed below are in the box. If something is missing, please contact your nearest customer service center. Projector with lens cap Power Cord 1.8m VGA Cable 1.8m Due to different IR Remote Control 2 × AAA Batteries applications in each country, some regions may have Documentation : different accessories. User’s Manual Warranty Card Quick Start Card WEEE Card (for EMEA only) 6 English
Resumen del contenido incluido en la página 7
Introduction Product Overview Main Unit 12 1 3 11 2 4 5 7 6 AUDIO1-IN HDMI SERVICE RJ-45 (VGA1/VGA2) RS-232 VIDEO S-VIDEO VGA1-IN / SCART / YPbPr VGA-OUT 12V OUT L R AUDIO OUT MIC AUDIO2-IN (S-VIDEO/VIDEO) VGA2-IN / YPbPr 15 5 5 9 8 10 2 13 14 1. Control Panel 9. Focus Lever 2. IR Receivers 10. Lens 3. Cable Cover 11. Ventilation (inlet) 4. Speaker 12. Ventilation (outlet) TM 5. Tilt-Adjustment Feet 13. Kensington Lock Port 6. Mirror Cover 14. Securit
Resumen del contenido incluido en la página 8
Introduction Control Panel 1 2 3 4 5 6 7 8 9 10 1. Lamp LED 2. Temp LED 3. Source 4. Re-Sync 5. Help 6. Power/Standby button and LED 7. Enter 8. Keystone Correction 9. Four Directional Select Keys 10. Menu 8 English
Resumen del contenido incluido en la página 9
Introduction Input/Output Connections 1 2 3 4 5 6 7 8 9 AUDIO1-IN RS-232 VIDEO S-VIDEO HDMI SERVICE RJ-45 (VGA1/VGA2) VGA1-IN / SCART / YPbPr VGA-OUT 12V OUT L R 12V OUT AUDIO OUT MIC AUDIO2-IN (S-VIDEO/VIDEO) VGA2-IN / YPbPr 10 11 14 15 12 13 1. 12V Trigger Relay (12V, 250mA) 2. 3.5mm Mini Jack Audio1 Input for VGA1/VGA2 3. 3pin Mini-din RS232 4. Composite V ideo Input 5. S-V ideo Input Monitor loop 6. VGA1/SCAR T/YPbPr Input through only sup-
Resumen del contenido incluido en la página 10
Introduction Remote Control 1. LED Indicator 2. Power On/Off 1 3. Four Directional Select Keys 2 4. Mouse Right Click 24 5. Page Up 6. Re-Sync 7. Page Down 12 3 8. Volume +/- 13 4 9. 3D 10. AV mute The interface 14 5 is subject to 11. Video model’s specifi- 15 6 12. PC/Mouse control cations. 13. Mouse Left Click 16 7 14. Enter/Help 17 8 15. Source 16. Keystone +/- 18 9 17. Menu 19 10 18. Brightness 20 19. HDMI 11 20. S-Video 21. Numbered keypad (for password input) 21 22 23 22. Free
Resumen del contenido incluido en la página 11
Installation Connecting the Projector Removing and Attaching the Cable Cover Cable Cover 2 1 Procedure for Removing and Attaching the Cable Cover: 1. Unscrew the screw on the cable cover. 1 2. Lift up and remove the cable cover. 2 Install the cable cover by reversing the previous steps. 11 English
Resumen del contenido incluido en la página 12
Installation Connect to Computer/Notebook +12V Output 3 4 MOLEX Audio Output 10 5 6 7 2 AUDIO1-IN RS-232 VIDEO S-VIDEO HDMI SERVICE RJ-45 (VGA1/VGA2) VGA1-IN / SCART / YPbPr VGA-OUT 12V OUT L R AUDIO OUT Due to the MIC AUDIO2-IN (S-VIDEO/VIDEO) VGA2-IN / YPbPr 1 difference in applications for each country, some regions may have different 8 accessories. (*) Optional 9 accessory 1..............................................................
Resumen del contenido incluido en la página 13
Installation Connect to Video Sources S-Video Output Composite Video Output 4 DVD Player, Set-top Box, HDTV receiver +12V Output 12 5 6 1 Audio Output 7 8 AUDIO1-IN RS-232 VIDEO S-VIDEO HDMI SERVICE RJ-45 (VGA1/VGA2) VGA1-IN / SCART / YPbPr VGA-OUT 12V OUT L R 3 AUDIO OUT MIC AUDIO2-IN (S-VIDEO/VIDEO) VGA2-IN / YPbPr 9 2 10 DVD Player, Set-top Box, HDTV receiver Due to the 11 difference in applications 1.......................................
Resumen del contenido incluido en la página 14
Installation Powering the projector On / Off Powering On the Projector 1. Securely connect the power cord and signal cable. When connected, the POWER/STANDBY LED will turn Amber. 2. Turn on the lamp by pressing “ ” button either on the top of the projector or on the remote. The POWER/STANDBY LED will now turn Green. When Power mode The startup screen will display in approximately 10 seconds. (Standby) is set The first time you use the projector, you will be asked to to Eco (<1W), the
Resumen del contenido incluido en la página 15
Installation Powering Off the Projector 1. Press the “ ” button on the remote control or on the control panel to turn off the projector. The following message will be displayed on the screen. Press the “ ” button again to confirm otherwise the message will disappear after 15 seconds. When you press the “ ” button for the second time, the projector will display countdown timer and will shut down. 2. The cooling fans continue to operate for about 10 seconds for cooling cycle and the POWE
Resumen del contenido incluido en la página 16
Installation Adjusting the Projected Image Adjusting the Projector’s Height The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector. 2. Rotate the adjustable ring clockwise to raise the projector or counter clockwise to lower it. Repeat with the remaining feet as needed. Tilt-Adjustment Feet Tilt-Adjustment Ring 16 English
Resumen del contenido incluido en la página 17
Installation Adjusting the Projector’s Focus To focus the image, rotate the focus ring until the image is clear. XGA series: The projector will focus at distances from 1.58 to 2.17 feet (475 to 662 mm). WXGA series: The projector will focus at distances from 1.58 to 2.17 feet (495 to 661 mm). Focus Ring Adjusting Projection Image Size XGA series: Projection Image Size from 63” to 85” (1.60 to 2.16 meters). WXGA series: Projection Image Size from 77” to 100” (1.96 to 2.54 meters
Resumen del contenido incluido en la página 18
Screen Diagonal Installation B=> Vertical distance between lens center and screen center C,E=>Throw distance Screen Center D=>Vertical distance between lens center and bottom of screen (top of screen for ceiling mount) α=> Throwangle Throw Angle (α) Lens Center XGA Screen Size (B) (C) (D) (E) (α) Diagonal Width (W) Height (H) inch mm inch mm inch mm inch mm inch mm inch mm inch mm degree 63 1600 50 1280 38 960 29 749 5 133 11 269 19 475 55.3 65 1651 52 1321 39 991 30 773 6 150 11 277 19
Resumen del contenido incluido en la página 19
User Controls Control Panel & Remote Control Control Panel Using the Control Panel Power/ Refer to the “Power On/Off the Projector” section on pages 14-15. Standby but- ton and LED Indicate the projector’s status. Automatically synchronize the projector to the input RE-SYNC source. Confirm your item selection. Enter SOURCE Press “SOURCE” to select an input signal. Press “Menu” to launch the on-screen display Menu (OSD) menu. To exit OSD, Press “Menu” again. Four Directional Use to select
Resumen del contenido incluido en la página 20
User Controls Remote Control Using the Remote Control Refer to the “Power On/Off the Projector” Power section on pages 14-15. L Button Mouse left click. R Button Mouse right click. Use this button to page up. Page + Page - Use this button to page down. Confirm your item selection. Enter / Help Help Menu (refer to page 22). Source Press “Source” to select an input signal. Automatically synchronizes the projector to Re-SYNC the input source. Four Directional Use to select items or ma
