Resumen del contenido incluido en la página 1
Basic Useful
Introduction Easy Start Setup Connections Appendix
Operation Features
DATA PROJECTOR
MODEL
PG-LX3000
PG-LX3500
PG-LW3000
PG-LW3500
OPERATION MANUAL
Resumen del contenido incluido en la página 2
IMPORTANT • For your assistance in reporting the loss or theft of your Projector, please record Model No.: the Model and Serial Number located on the bottom of the projector and retain this Serial No.: information. • Before recycling the packag ing, please ensure that you have checked the con tents of the carton thoroughly against the list of “Supplied accessories” on page 3. SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non
Resumen del contenido incluido en la página 3
Introduction Before using the projector, please read this operation manual carefully. Introduction ENGLISH There are two important reasons for prompt warranty registration of your new SHARP Projec tor, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service and labor warranty applicable to your purchase. 2. CONSUMER PRODUCT SAFETY ACT To ensure that you will promptl
Resumen del contenido incluido en la página 4
INFORMATION This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the operation man
Resumen del contenido incluido en la página 5
Introduction Accessories Supplied accessories Two LR03 batteries RGB cable (“AAA” size, UM/SUM 4, (6 ' (1.8 m)) HP16 or similar) Remote control Power cord* (1) (2) (3) For U.S. and For Europe, For U.K. and Canada, etc. except U.K. Singapore (6 ' (1.8 m)) (6 ' (1.8 m)) (6 ' (1.8 m)) * W hich power cords are supplied along with your projector depends on the region.
Resumen del contenido incluido en la página 6
Contents Preparing Displaying the Black Screen and Introduction Turning Off the Sound Temporarily ....... 29 Resize Mode .......................................... 30 Accessories ............................................3 Contents .................................................4 IMPORTANT SAFEGUARDS ..................6 Useful Features Part Names and Functions ...................10 Top View ................................................ 10 Operating with the Remote Control.
Resumen del contenido incluido en la página 7
Introduction Auto Restart Function ............................. 50 Speaker Setting ...................................... 50 Fan Mode Setting ................................... 50 System Lock Function ............................ 51 Keylock Function .................................... 52 Selecting the Quick Start Menu .............. 52 COMPUTER2 Select .............................. 52 Setting the FUNCTION Button Operation.. 53 STANDBY Mode ..................................... 53 STANDBY Aud
Resumen del contenido incluido en la página 8
IMPORTANT SAFEGUARDS CAUTION: Please read all of these instructions before you operate this product and save these instructions for later use. Electrical energy can perform many useful functions. This product has been engineered and manufactured to assure your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS. In order not to defeat the safeguards incorporated in this product, observe the following basic rule
Resumen del contenido incluido en la página 9
Introduction 15. Overloading 19. Replacement Parts Do not overload wall outlets, extension cords, When replacement parts are required, be or integral convenience receptacles as this sure the service technician has used can result in a risk of fire or electric shock. replace ment parts specified by the manufacturer or have the same 16. Object and Liquid Entry characteristics as the original part. Never push objects of any kind into this Un
Resumen del contenido incluido en la página 10
Observe the following safeguards when setting up your projector. Caution concerning the lamp unit When using the projector in high- ■ Potential hazard of glass particles if lamp altitude areas such as mountains (at ruptures. In case of lamp rupture, contact altitudes of approximately 1,500 your nearest Sharp Authorized Projector meters (4,900 feet) or more) Dealer or Service Center ■ When you use the projector in high-altitude for replacement. areas with thin air, set “Fan Mode” to See
Resumen del contenido incluido en la página 11
Introduction Caution regarding usage of the projector Temperature monitor function ■ If you are not to use the projector for a long time or before moving the projector, make certain you unplug the power cord from the wall outlet, and disconnect any other cables connected to it. ■ If the temperature inside the projector ■ Do not carry the projector by holding the increases, due to blockage of the air vents, lens. or the setting location, the temperature ■ Do not expose the projector to di
Resumen del contenido incluido en la página 12
Part Names and Functions Numbers in Z refer to the main pages in this operation manual where the topic is explained. 1 11 2 12 3 8 4 13 9 5 6 7 10 14 15 16 17 Top View Front View 1 Temperature warning indicator 61 11 Zoom ring 27 Fo r enlarging/reducing the picture. 2 Lamp indicator 61 12 Focus ring 26 3 Power indicator 61 Fo r adjusting the focus. 4 STANDBY/ON button 25 13 Intake vent 60 F or turning the power on and putting the projector into S
Resumen del contenido incluido en la página 13
Introduction 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Rear View (Terminals) 24 8 LAN terminal 1 HDMI terminal 20, 21, 22 Terminal for controlling the projector using Terminal for HDMI input. a computer via network. 2 AUDIO 2 input terminal 21 9 RS-232C terminal 23 Terminal for controlling the projector using 3 VIDEO input terminal 21 a computer. Terminal for connecting video equipment. 10 Exhaus v tent 60 4 COMPUTER/COMPONEN T 1 input 11 Speake r 50 termi
Resumen del contenido incluido en la página 14
Part Names and Functions (Continued) Numbers in Z refer to the main pages in this operation manual where the topic is explained. 1 8 POINTER button 34 For displaying the pointer. 2 9 Adjustment buttons (P/R/O/Q) 39 13 For selecting and adjusting menu items. 3 14 10 EFFECT button 34 4 15 For changing the pointer or spot area. 5 16 11 KEYSTONE button 28 6 17 For entering the Keystone Correction 7 mode. 18 8 12 FUNCTION button 53 9 For operating and executing a function 19
Resumen del contenido incluido en la página 15
Introduction Inserting the Batteries Pull down the tab on the cover and remove the 1 cover towards the direction of the arrow. Insert the batteries. 2 • Insert the batteries making sure the polarities correctly match the m and n marks inside the battery compartment. Insert the lower tab of the cover into the opening, 3 and lower the cover until it clicks in place. Incorrect use of the batteries may cause them to leak or explode. Please follow the precautions below Caution •
Resumen del contenido incluido en la página 16
Easy Start This section shows the basic operation (projector connecting with the computer). For details, see the page described below for each step. Setup and Projection In this section, connection of the projector and the computer is explained using one example. 3 STANDBY button 8 STANDBY/ON 8 button ON button 3 O/Q buttons 6 INPUT buttons 6 6 INPUT buttons Zoom ring 5 4 Adjustment 6 buttons Focus ring 4 (P/R/O/Q) KEYSTONE button 5 HEIGHT 4 ADJUST lever _P. 16 1. Place the project
Resumen del contenido incluido en la página 17
Easy Start 4. Adjust the projected image with the Setup Guide 1 After the projector turns on, the Setup Guide appears. (When “Setup Guide” is set to “On”. See page 49.) 2 Follow the steps in the Setup Guide and adjust the focus, height (angle) and picture size. 3 After adjusting the focus, height (angle) and picture size, press ENTER to finish the Setup Guide. _P. 26 5. Correct trapezoidal distortion Correcting trapezoidal distortion using Keystone Correction. Shrinks Shrinks On the rem
Resumen del contenido incluido en la página 18
254"×159" (646 cm × 404 cm) 240" 180" (610 cm 457 cm) 85"×53" (215 cm × 135 cm) 34"×21" (86 cm × 54 cm) × × × × 80"×60" (203 cm ×152 cm) 32"×24" (81 cm 61 cm) × 170"×106" (431 cm × 269 cm) 160" 120" (406 cm 305 cm) Setting Up the Projector Video Setup If using this projector outside the U.S.A., please change setting to “0 IRE” in Video Setup. (See page 46.) Setting Up the Projector For optimal image quality, position the projector perpendicular to the screen with the projector's feet flat and
Resumen del contenido incluido en la página 19
Setup Screen Size and Projection Distance Screen Note H • Allow a margin of error in the values in the Lens center diagrams below. L [PG-LW3000/PG-LW3500] 16:10 Signal Input (Normal Mode) Picture (Screen) size Projection distance [L] Distance from the lens center χ to the bottom of the image [H] Diag. [ ] Width Height Minimum [L1] Maximum [L2] 37 300" (762 cm) 646 cm (254") 404 cm (159") 10.0 m (32' 9") 12.0 m (39' 6") 7 cm (2 /64") 9 250" (635 cm) 538 cm (212") 337 cm (132") 8.3 m (27' 4") 10
Resumen del contenido incluido en la página 20
Screen Size and Projection Distance (Continued) Screen Note H • Allow a margin of error in the values in the Lens center diagrams below. L [PG-LX3000/PG-LX3500] 4:3 Signal Input (Normal Mode) Picture (Screen) size Projection distance [L] Distance from the lens center χ to the bottom of the image [H] Diag. [ ] Width Height Minimum [L1] Maximum [L2] 23 300" (762 cm) 610 cm (240") 457 cm (180") 11.8 m (38' 9") 14.2 m (46' 5") 17 cm (6 /32") 19 250" (635 cm) 508 cm (200") 381 cm (150") 9.9 m (32'
