Resumen del contenido incluido en la página 1
Projector
CP-S240/CP-X250
CP-S245/CP-X255
User's Manual – Quick Guide
Thank you for purchasing this projector.
WARNING ►Before using this product, please read the "User's Manual -
Safety Guide" and related manuals to ensure the proper use of this product. After
reading them, store them in a safe place for future reference.
NOTE • The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this
manual.
• T
Resumen del contenido incluido en la página 2
Arrangement Arrangement WARNING ►Install the projector in a suitable environment according to instructions of the "User's Manual - Safety Guide". CAUTION ►This projector has some intake vents also on the bottom. Avoid blocking vents. Put nothing that is sucked or sticks to the bottom of projector. (calculated for a full size screen, ±10%) (b) 4:3 16:9 (c) up (a) (a) (c) down For the model CP-S240/CP-S245 4 : 3 screen 16 : 9 screen (a) Screen (b) Projection distance (c) Screen height (b) Pr
Resumen del contenido incluido en la página 3
Adjusting the projector's elevator Adjusting the projector's elevator CAUTION ►If you press the elevator button without holding the projector, the projector might crash down, overturn, smash your fingers and possibly result in malfunction. To prevent damaging the projector and injuring yourself, always hold the projector whenever using the elevator buttons to adjust the elevator feet. ►Do not incline the projector rightward or leftward. Also do not incline it backward or forward exceeding 9
Resumen del contenido incluido en la página 4
Connecting your devices Connecting your devices Examples of connection with a computer * In the default setting, the AUDIO IN1 port is the audio port for the RGB IN1 and RGB IN2 AUDIO IN2 Y R ports. To change the settings, refer to the AUDIO item in the SETUP menu. CONTROL RGB IN1 RGB IN2 USB AUDIO OUT CB/PB RGB OUT L RGB cable K AUDIO IN1 CR/PR USB cable LINK VIDEO ACT LAN S-VIDEO AUDIO IN2 Y R CONTROL RGB IN1 RGB IN2 USB AUDIO OUT RGB OUT CB/PB L AUDIO IN2 K Y R AUDIO IN1 RGB out Audio out
Resumen del contenido incluido en la página 5
AUDIO IN2 Y R CONTROL RGB IN1 RGB IN2 USB AUDIO OUT CB/PB RGB OUT L K AUDIO IN1 CR/PR VIDEO S-VIDEO AUDIO IN2 Y R CONTROL RGB IN1 RGB IN2 RGB IN2 USB AUDIO OUT RGB OUT CB/PB L K AUDIO IN1 CR/PR VIDEO S-VIDEO Connecting your devices Use the RGB IN OUT switch to select RGB OUT Connecting to a monitor (output) (RGB OUT is selected if the switch is pushed in). AUDIO IN2 Y R CONTROL RGB IN1 RGB OUT RGB in RGB IN2 USB AUDIO OUT CB/PB RGB OUT L K AUDIO IN1 CR/PR VIDEO S-VIDEO RGB cable Connecting to a
Resumen del contenido incluido en la página 6
Putting batteries into the remote control / Connecting the power supply Putting batteries into the remote control WARNING ►Always handle the batteries with care and use them only as directed. Improper use may result in battery explosion, cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environment. • Be sure to use only the batteries specified. Do not use batteries of different types at the same time. Do not mix a new battery with used one. • Make su
Resumen del contenido incluido en la página 7
Operating Operating WARNING ►When the power is on, a strong light is emitted. Do not look into the lens of projector. Also do not peep at the inside of projector through a hole. Turning on the power POWER Set the power switch to the ON position. (Steady orange) 1. POWER POWER Press the STANDBY/ON (projector or 2. remote control) button. (Blinking in green) (Steady green) Displaying To select an input signal, use the button of INPUT (projector), or the buttons 1. of RGB, VIDEO or
Resumen del contenido incluido en la página 8
/ Remote control Control buttons Control buttons LAMP indicator TEMP indicator Cursor buttons POWER indicator ▲,▼,◄,► STANDBY/ON button INPUT button Remote control SEARCH button STANDBY/ON button RGB button AUTO button VIDEO RGB SEARCH VIDEO button BLANK button BLANK ASPECT AUTO ASPECT button PAGE UP button MAGNIFY HOME PAGE UP VOLUME ON HOME button VOLUME button END PAGE DOWN MUTE MAGNIFY OFF MUTE button ON button FREEZE KEYSTONE OFF button PAGE DOWN button END button KEYSTONE button F
Resumen del contenido incluido en la página 9
Lamp Lamp HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. In addition, when the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury to escape from the p
Resumen del contenido incluido en la página 10
Lamp (continued) A lamp has a finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, contact your dealer and tell the lamp type number. Type number = DT00731. Turn the projector off, and unplug the power cord. Allow the lamp to cool for
Resumen del contenido incluido en la página 11
Air filter Air filter WARNING ►Before caring, make sure the power switch is off and the power cable is not plugged in, then allow the projector to cool sufficiently. The care in a high temperature state of the projector could cause an electric shock, a burn and/or malfunction to the projector. ►Use only the air filter of the specified type. Do not use the projector with the air filter and the filter cover removed. It could result in a fire and/or malfunction to the projector. ►The air filter should
Resumen del contenido incluido en la página 12
Air filter (continued) Apply a vacuum cleaner to the air filter 4. and the filter cover. Please replace the air filter when it is damaged or too soiled. Replace the air filter in its original 5. position. Secure the air filter in place by pressing each of the six locations. Make sure there is no dust or dirt Air filter’s remaining after the cover is in place. If any knob dust or dirt remains use a vacuum cleaner to remove it as when placing the filter cover on the air filter. Reattach the fi
Resumen del contenido incluido en la página 13
Replacing Internal Clock battery Replacing Internal Clock battery (for the models CP-S245, CP-X255 only) Consumption of the battery makes the clock not to work correctly. (Please refer to the User’s Manual - Operating Guide.) When the clock is wrong or it has stopped, please replace the battery according to the following procedures. WARNING ►Always handle the batteries with care and use them only as directed. Battery may explode if mistreated. Do not recharge, disassemble or dispose of in
Resumen del contenido incluido en la página 14
About “User’s Manual – Operating Guide” The “User’s Manual - Operating Guide” of this projector is written into the CD-ROM. Before using, please read the following and use the CD-ROM correctly. CAUTION • Only use the CD-ROM in a computer CD drive. The CD-ROM is designed for PC use only. NEVER INSERT THE CD-ROM INTO A NON-COMPUTER CD PLAYER! Inserting the CD-ROM into an incompatible CD drive may produce a loud noise, which in turn MAY RESULT IN EAR AND SPEAKER DAMAGE! • After using CD-ROM, p
