Resumen del contenido incluido en la página 1
Pro9000
1080p Laser Hybrid LED
®
Home Theatre DLP Projector
User Guide
IMPORTANT: Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service. Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://www.
viewsonic.com in English, or in specific languages using the Regional selectio
Resumen del contenido incluido en la página 2
Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable prot
Resumen del contenido incluido en la página 3
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this unit near water. 6. Clean with a soft, dry cloth. 7. Do not block any ventilation openings. Install the unit in accordance with the manufac- turer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of
Resumen del contenido incluido en la página 4
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous sub- stances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Actual Substance Concentration Concentration Lead (Pb) 0.1% < 0
Resumen del contenido incluido en la página 5
Copyright Information ® Copyright © ViewSonic Corporation, 2012. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. VESA is a registered trademark of the Video Electronics Standards Association.
Resumen del contenido incluido en la página 6
Notes on the AC Power Cord AC Power Cord must meet the requirement of countries where you use this projector. Please confirm your AC plug type with the graphics below and ensure that the proper AC Power Cord is used. If the supplied AC Power Cord does not match your AC outlet, please contact your sales dealer. This projector is equipped with a grounding type AC line plug. Please ensure that your outlet fits the plug. Do not defeat the safety purpose of this grounding type plug. We highly re
Resumen del contenido incluido en la página 7
Table of Contents OPTIONS ......................................... 33 Introduction 7 OPTIONS | Password ...................... 35 Package Overview ................................. 7 OPTIONS | OSD Settings ................ 36 Product Overview ................................... 8 OPTIONS | PIP Setting .................... 37 Main Unit ............................................ 8 OPTIONS | Others ........................... 38 Control Panel ..................................... 9 Appendices 39
Resumen del contenido incluido en la página 8
AAA Introduction Package Overview Unpack and inspect the box contents to ensure all parts listed below are in the box. If something is missing, please contact our customer service. Projector with lens cap AC Power Cord HDMI Cable POWER ON OFF S-Video Video PC Source HDMI1 HDMI2 Aspect Keystone Volume Eco mode Auto Sync Enter Menu Exit Memory Default User1 User2 Over Scan Magnify Lock RGB Color Gamma CMY Temp Freeze Blank Pattern Color Sleep mode Timer Soft Carrying Bag Remote Control AAA Batter
Resumen del contenido incluido en la página 9
Product Overview Main Unit 3 4 1 5 2 (Front View) 6 7 8 (Rear View) 10 9 10 (Bottom View) 1. Front IR Receiver 6. Connectors Panel 2. Zoom Lens & Lens Cover 7. Kensington Lock 3. Control Panel 8. Power Socket 4. Zoom Ring 9. Security Bar 5. Focus Ring 10. Rubber Elevator Feet 8
Resumen del contenido incluido en la página 10
Control Panel 8 7 6 1 2 3 4 5 1. / Power key & Power LED 2. Top IR Receiver 3. Four directional select keys / Keystone +/- 4. Source key 5. Enter key 6. Lamp LED 7. Temp (Temperature) LED 8. Menu / Exit key 9
Resumen del contenido incluido en la página 11
Connection Ports 1 2 3 4 5 6 7 8 9 10 1. RS232 Connector 2. Composite Video Input Connector 3. S-Video Connector 4. VGA Connector (PC analog signal/HDTV/component video input) 5. HDMI 1 Connector 6. HDMI 2 Connector 7. Audio Input Connector 8. Kensington™ Lock Port 9. Power Socket 10. Audio Output Connector 10
Resumen del contenido incluido en la página 12
Remote Control 4 1. Power ON Power on the projector. 1 POWER 2 2. Power OFF Power off the projector. 5 ON OFF S-Video Video PC 3. S-Video 3 7 Switch to S-Video source. Source HDMI1 HDMI2 6 8 4. Video Switch to composite video Aspect 9 source. Keystone Volume 12 Eco 10 5. PC mode Switch to VGA source. Auto 14 13 Sync 6. Source 18 11 Automatically search for the input sources or select the input source manually. Enter 17 7. HDMI 1 Switch to HDMI 1 source. 8. HDMI 2 Menu Exit 15 1
Resumen del contenido incluido en la página 13
15. Menu Call out the OSD Main menu, back to the previous OSD step, or exit the OSD menu. 16. Exit Exit current OSD page or exit OSD menu. 17. Four Directional Select Keys Press up, down, left, right direction buttons to select items or make adjustments. 18. Enter Activate or confirm the selected OSD function. 19. Memory keys Press the respective button to save the shown and desired OSD function as a memory hot key. 20. Default Reset all settings to factory default. For more detail
Resumen del contenido incluido en la página 14
Installation Connecting to Computer/Notebook Power socket Computer 2 4 5 3 2 1 Notebook 1. Power Cord 4. VGA to DVI-A Cable * 2. VGA Cable 5. Audio Cable * 3. HDMI Cable * Due to the difference in applications for each country, some regions may have different accessories. * Optional accessory 13
Resumen del contenido incluido en la página 15
Connecting to Video Sources DVD player, Set-top box, Power socket S-Video output HDTV receiver 4 3 5 2 6 1 DVD player Audio output 1. Power Cord 4. VGA to HDTV (RCA) Cable * 2. HDMI Cable * 5. Audio Cable * 3. S-Video Cable * 6. Audio Cable * Due to the difference in applications for each country, some regions may have different accessories. * Optional accessory 14
Resumen del contenido incluido en la página 16
Powering On/Off the Projector Powering On the Projector 1. Remove the lens cap. 2. Securely connect the power cord and signal cable. When connected, the Power LED will flash blue. 3. Turn on the projector by pressing “ ” button on the control panel. The Power LED will turn blue. 4. Turn on your source that you want to display on the screen (computer, note- book, video player, etc). The projector will detect the source automatically and will display on the screen. 5. If you connected mult
Resumen del contenido incluido en la página 17
Powering off the Projector 1. Press the “ ” button on the control panel to turn of f the projector . The following message will be displayed on the screen. Press the “ ” button again to confirm. Y ou can also turn of f the projector by pressing the Power o FF button on the remote control. 2. It is now safe to unplug the power cord. LED Indicator Messages Message Lamp LED (Red) Temp LED (Red) Power LED (Blue) Flash On/Of f 100ms Flash On/Of f 100ms Fla
Resumen del contenido incluido en la página 18
Adjusting the Projected Image Adjusting the Projector’s Height The projector is equipped with elevator foot for adjusting the image height. y To raise the image: Use screw in foot to raise the image to the desired height angle and fine-tune the display angle. y To lower the image: Use screw in foot to lower the image to the desired height angle and fine-tune the display angle. Rubber Feet 1 2 17
Resumen del contenido incluido en la página 19
Max screen size 75" Min screen size 63" Adjusting the Projector’s Focus To focus the image, rotate the focus ring until the image is clear. Focus Ring Adjusting Projection Image Size How to optimize screen size and distance Consult the table below to find the optimal screen sizes achievable when the projector is positioned at a desired distance from the screen. Example: If the projector is 2.5 m from the screen, good image quality is possible for image sizes between 63” and 75”. B Height: 109
Resumen del contenido incluido en la página 20
Distance v.s Screen size table Screen size Top Screen size Top Desired (Min zoom) (Max zoom) Distance From base to Diagonal From base to Diagonal (m) W (cm) x H top of image (inch) W (cm) x H top of image (inch) (cm) (cm) (cm) (cm) 1.5 38 83 X 47 54 45 100 X 56 65 1.8 45 100 X 56 65 54 120 X 68 78 2 50 111 X 63 73 60 133 X 75 87 2.3 58 128 X 72 83 69 153 X 86 100 2.5 63 138 X 78 91 75. 167 X 94 109 2.8 70 155 X 88 102 84 187 X 105 122 3 75 167 X 94 109 90 200 X 113 131 3.2
