Resumen del contenido incluido en la página 1
Ceramic glass induction hob
ZKT 651 D
Installation and Operating Instructions
g
Resumen del contenido incluido en la página 2
Dear Customer, Please read these user instructions carefully and keep them to refer to later. Please pass the user instructions on to any future owner of the appliance. The following symbols are used in the text: 1 Safety instructions Warning! Notes that concern your personal safety. Important! Notes that show how to avoid damage to the appliance. 3 Useful tips and hints 2 Environmental information 2
Resumen del contenido incluido en la página 3
Contents Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Description of the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Cooking surface layout . . . . . .
Resumen del contenido incluido en la página 4
Operating Instructions 1 Safety instructions Safety during use 3 Please comply with these instructions. If you do not, any damage resulting is not covered Remove stickers and film from the glass ceramic. by the warranty. There is the risk of burns from the appliance if used carelessly. 5 This appliance conforms with the following EU Cables from electrical appliances must not touch Directives: the hot surface of the appliance or hot cookware. – 73/23/EEC dated 19.02.1973 Low Voltage Direc-
Resumen del contenido incluido en la página 5
Description of the Appliance Cooking surface layout Induction cooking zone 1800 W Induction cooking zone 1400W Induction cooking zone 2200W Control panel Induction cooking zone 1800 W with power function 3000W with power function 2300 W Control panel layout Cooking zone indicators Power function Timer function Heat setting selection Timer display Lock On/Off Display with power indicator Timer 5
Resumen del contenido incluido en la página 6
Touch Control sensor fields The appliance is operated using Touch Control sen- sor fields. Functions are controlled by touching sen- sor fields and confirmed by displays and acoustic signals. Touch the sensor fields from above, without covering other sensor fields. Sensor field Function On / Off Switches appliance on and off Increase settings Increasing heat setting/time Decrease settings Decreasing heat setting/time Timer Timer selection Lock Locking/unlocking the control panel Power Swit
Resumen del contenido incluido en la página 7
Operating the appliance 3 Use the induction cooking zones with suitable cookware. Switching the appliance on and off Control panel Display Pilot light Switch on Touch for 2 seconds ¾ / h lights up Switch off Touch for 1 second h / none goes out 3 After switching on, within approx. 10 seconds a heat setting or a function must be set, other- wise the appliance automatically switches it- self off. Selecting the heat setting Control panel Display Increase Touch u to Ç / p Decrease Touch Ç to ¾
Resumen del contenido incluido en la página 8
Using the automatic warm-up function Step Control panel Display 1. Setting the level Ç / pÇ / p 2. Place to one side for a moment Ç / p 3. touch a 4. touch in order to set the desired cooking setting Æ until ¿ / u after 3 seconds a All cooking zones are equipped with an automatic warm-up function. The automatic warm-up function sets the cooking zone to the highest setting for a certain period of time and then automatically switch- es back to the cooking setting that was originally set. 3 I
Resumen del contenido incluido en la página 9
Locking/unlocking the control panel The control panel, with the exception of the “On/Off” sensor field, can be locked at any time in order to prevent the settings being changed e.g. by wiping over the panel with a cloth. Control panel Display Switch on Touch l (for 5 seconds) Switch off Touch previously set heat setting 3 When you switch the appliance off, the locking function is automatically switched off. Using the child safety device The child safety device prevents unintentional use of the
Resumen del contenido incluido en la página 10
Switching the power function on and off The power function makes more power available to the induction cooking zones, e.g. to bring a large quantity of water to the boil quickly. The power function is activated for 10 minutes. After that the induction cooking zone automatically switches back to heat setting 9. Control panel Display Switch on Touch p Switch off Touch Ç Touch Ç Power Management The cooking zones have a maximum power available to them. If this power range is exceeded by switc
Resumen del contenido incluido en la página 11
Using the timer All cooking zones can use each use one of the two timer functions at the same time. Function Condition Outcome after the time has elapsed Automatic cut-out a heat setting is set acoustic signal 00 flashes Cooking zone switches off Countdown timer cooking zones not in use acoustic signal 00 flashes 3 If a cooking zone is switched off, the timer function set is also switched off. 3 If a heat setting is set on this cooking zone in addition to a countdown timer, the cooking zone i
Resumen del contenido incluido en la página 12
Setting the time Step Control panel field Display 1. Select cooking zone Pilot light of the cooking zone selected flashes 2. Touch or for the cooking 00 to 99 minutes zone selected After a few seconds the pilot light flashes more slowly. The time is set. The time counts down. Switching off the timer function Step Control panel field Display 1. Select cooking zone Pilot light of the cooking zone selected flashes faster The time remaining is displayed 2. Touch for the cooking zone se- T
Resumen del contenido incluido en la página 13
Safety cut-out Cooking surface If after switching on the cooking surface, a heat setting is not set for a cooking zone within approx. 10 seconds, the cooking surface automatically switches itself off. If one or more sensor fields are covered for longer than approx. 10 seconds, e.g. by a pan placed upon it, a signal sounds and the cooking surface switches off automatically. If all cooking zones are switched off, the cooking surface automatically switches itself off after ap- prox. 10 second
Resumen del contenido incluido en la página 14
Tips on cooking and frying 3 Information about acrylamides According to the latest scientific research, in- tensive browning of food, especially in prod- ucts containing starch, may present a health risk due to acrylamide. Therefore we recom- mend cooking at low temperatures and not browning foods too much. Cookware for induction cooking zones Cookware made of suitable Steel, enamelled steel yes Cast iron yes Stainless steel if appropriately labelled by the manufacturer Aluminium, copper, brass
Resumen del contenido incluido en la página 15
Tips on energy saving 2 Place cookware on the cooking zone before it is switched on. 2 If possible, always place a lid on the cook- ware. Examples of cooking applications The information given in the following table is for guidance only. Heat Cooking suitable for Cook time Tips/Hints setting process 0Off position Keeping V Keeping cooked foods warm as required Cover food warm Hollandaise sauce, Melting 5-25 mins. Stir occasionally melting butter, chocolate, gelatine 1-2 Solidifying Fluffy omel
Resumen del contenido incluido en la página 16
Cleaning and care 1 Take care! Risk of burns from residual heat. 1 Important Sharp objects and abrasive clean- ing materials will damage the appliance. Clean with water and washing up liquid. 1 Important Residues from cleaning agents will damage the appliance. Remove residues with water and washing up liquid. Cleaning the appliance after each use 1.Wipe the appliance with a damp cloth and a little washing up liquid. 2.Rub the appliance dry using a clean cloth. Removing deposits 1.Place the scrap
Resumen del contenido incluido en la página 17
What to do if… Problem Possible cause Remedy The cooking zones will not switch More than 10 seconds have passed Switch the appliance on again. on or are not functioning since the appliance was switched on The lock is switched on l Switch off the lock (See the section “Locking/unlocking the control panel”) The child safety device is switched Deactivate the child safety device on l (See the section “Child safety de- vice”) Several sensor fields were touched Only touch one sensor field at the s
Resumen del contenido incluido en la página 18
If you are unable to remedy the problem by fol- lowing the above suggestions, please contact your local Service Force Centre. 1 Warning! Repairs to the appliance are only to be carried out by qualified service engineers. Considerable danger to the user may result from improper repairs. 3 If the appliance has been wrongly operated, the visit from the service technician or dealer may not take place free of charge, even during the warranty period. Disposal 2 Packaging material The packaging materi
Resumen del contenido incluido en la página 19
Installation Instructions Safety instructions The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.) Installation may only be carried out by a qualified electrician. The minimum distances to other appliances and units are to be observed. A protective floor must be installed under the ap- pliance. The cut surfaces of the worktop are to be protected against moisture using a sui
Resumen del contenido incluido en la página 20
Sticking on the seal Clean the worktop in the area of the cut-out sec- tion. Stick the one-sided self-adhesive sealing tape supplied all the way round the lower edge of the cooking surface along the outer edge of the glass ceramic panel. Do not stretch it. The cut ends should lie in the middle of one side. When you have cut it to length (add a few mm), press the two ends flush up against one another. 20
