Manual de instrucciones de Lucas Industries LPT-PR0312

Resumen del contenido incluido en la página 1

Plunge Router manual 9/7/07 16:14 Page 1
Parts diagram
LPT-PR0312
Plunge Router
Guarantee
Your Lucas Power Tool is a
quality product made to high
Plunge Router
manufacturing standards. It is
guaranteed for domestic use
against manufacturing defects for
Oberfräse
a period of 36 months from the
date of purchase.
To claim this extended warranty
Fresadora electrónica modelo
you need to register on our
website. If your product fails due
to a defect in material or
Défonceuse à piston
construction

Resumen del contenido incluido en la página 2

Plunge Router manual 9/7/07 16:14 Page 3 General safety precautions 14. Unplug tool before performing regular Using your Lucas Plunge Router 1. Install the desired plunge bit maintenance and cleaning. Note: To reduce the risk of injury, fire, and related Before attempting to insert or remove a router bit, 2. Unlock (lift) the router height locking lever accidents, follow these IMPORTANT safety tips. 15. Keep your mind on the job at hand and stay unplug the tool from the wall socket. next to

Resumen del contenido incluido en la página 3

Plunge Router manual 9/7/07 16:14 Page 5 After the first pass, rotate the stop setting to the Operation Fig. 6 TRIM-GUIDE: next tallest stop and continue until the desired Place the router base on the work piece while Use the trim guide for optimum curve cutting or depth is achieved. keeping the bit free and away from the material. trimming. The guide roller ensures perfectly Regulate the upper limit of the router body by Switch the tool on and wait until it reaches full contoured cuts. rotat

Resumen del contenido incluido en la página 4

Plunge Router manual 9/7/07 16:14 Page 7 STENCIL BOARD GUIDE: To replace brushes, remove the plastic brush No. Part Name Qty No. Part Name holder cover with a slotted screwdriver. Remove 1 Pan Head Screw 2 45 Switch Safety Button The stencil board guide provides a sleeve for the the old brushes and thoroughly clean out the router bit so that the router can move easily within 2 Tall cap 1 46 Trigger Switch brush apertures. Replace with new brushes and the stencil guide (Fig. 10/11). 3 Brush ho