Resumen del contenido incluido en la página 17
Specifications VIDEO Number of Channels 16 Modulation Type Pulse code modulation, 8-bit resolution Video Input (FT8316)/ 1.0 Vp-p, 75 ohms; NTSC, PAL, and SECAM Video Output (FR8316) Bandwidth 6.5 MHz Gain Unity Crosstalk -50 dB typical at 3.58 MHz Differential Gain <1% Differential Phase <1.2° Tilt <1% Signal-to-Noise Ratio >60 dB (CCIR weighted) GENERAL Operating Temperature -40° to 167°F (-40° to 75°C) Input Power Requirements 12 VDC or 24 VAC, 900 mA LED Indicators Power Video Prese
Resumen del contenido incluido en la página 18
OPTICAL POWER BUDGET AND TRANSMISSION DISTANCE Model No. Optical Maximum Compatible Power Transmission Transmitter Receiver Wavelength Budget Distance Multimode (62.5/125 µm) † ‡ FT8316MSTR FR8316MSTR 1275 nm 18 dB* 1 km (0.6 mi) 1300 nm Single-Mode (9/125 µm) § FT8316SSTR FR8316SSTR 1275 nm 18 dB* 26 km (16.1 mi) 1300 nm § FT8316SFCR FR8316SFCR 1275 nm 18 dB* 26 km (16.1 mi) 1300 nm * Optical power budget is 15 dB when operating temperature range is -40° to 0°C. † W
Resumen del contenido incluido en la página 19
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FR/FT/FS Series fiber optic products and TW3000 Series unshielded twisted pair transmission products. ® • Three years on Genex Series products (multiplexers, server, and keyboard). ® • Three years on Camclosure and fixed camera m
Resumen del contenido incluido en la página 20
Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.com ISO9001 United States Canada United Kingdom The Netherlands Singapore Spain Scandinavia France Middle East | | | | | | | |
Resumen del contenido incluido en la página 1
INST ALLA TION
FT8316/FR8316
Fiber Transmitter
and Receiver
Sixteen-Channel Digitally Encoded
Video
C2603M (6/06)
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 4
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of
Resumen del contenido incluido en la página 5
The product and/or manual may bear the following marks: This symbol indicates that dangerous voltage constituting a risk of electric shock is present CAUTION: within this unit. RISK OF ELECTRIC SHOCK. This symbol indicates that there are important DO NOT OPEN. operating and maintenance instructions in the literature accompanying this unit. C2603M (6/06) 5
Resumen del contenido incluido en la página 6
Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RADIO AND TELEVISION INTERFERENCE This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
Resumen del contenido incluido en la página 7
Product Overview DESCRIPTION The FT8316/FR8316 fiber transmitter and receiver provide the ability to transmit up to 16 composite video channels over one optical fiber (refer to Figure 1). SIXTEEN SIXTEEN VIDEO VIDEO OUTPUTS INPUTS FT8316 FR8316 TRANSMITTER RECEIVER ONE FIBER Figure 1. Sixteen-Channel Video FT8316 Transmitter and FR8316 Receiver Features of the FT8316/FR8316 fiber optic transmission system include the following: • 8-bit digitally encoded video for
Resumen del contenido incluido en la página 8
MODELS The FT8316/FR8316 fiber transmitter and receiver consist of the following series of models: Multimode Models:* FT8316MSTR Sixteen-channel fiber optic video transmitter; multimode, ST connector FR8316MSTR Sixteen-channel fiber optic video receiver; multimode, ST connector Single-Mode Models:* FT8316SSTR Sixteen-channel fiber optic video transmitter; single-mode, ST connector FR8316SSTR Sixteen-channel fiber optic video receiver; single-mode, ST connector FT8316SFCR Sixteen-channe
Resumen del contenido incluido en la página 9
FRONT PANEL The front panel of the FT8316 transmitter and FR8316 receiver provides LED indicators that a llow you to monitor signal status, laser status (transmitter only), and operating power. The following sections provide a view of the front panel of the transmitter and receiver. FRONT PANEL - FT8316 TRANSMITTER Figure 2 illustrates the front panel of the FT8316 transmitter. 16 12 8 4 15 7 11 3 14 10 6 2 13 9 5 1 Figure 2. Front Panel of FT8316 Transmitter
Resumen del contenido incluido en la página 10
FRONT PANEL - FR8316 RECEIVER Figure 3 illustrates the front panel of the FR8316 receiver. 16 12 8 4 15 11 7 3 14 10 6 2 1 13 9 5 Figure 3. Front Panel of FR8316 Receiver VIDEO PRESENT LEDs 1-16 OPTIC FAULT LED, optical signal status indicator, channels 1-8 OPTIC FAULT LED, optical signal status indicator, channels 9-16 NOTE: As indicated above, the two Optic Fault LEDs operate independently of one another. One Optic Fault LED indicates optical signal status fo
Resumen del contenido incluido en la página 11
REAR PANEL Connections to the FT8316 transmitter and FR8316 receiver are made to the rear panel of the modules (refer to Figure 4). 4 8 12 16 3 7 11 15 2 6 10 14 1 5 9 13 Figure 4. Rear Panel of FT8316 Transmitter and FR8316 Receiver RACK POWER/ALARM CONNECTOR, 4-pin connector for power/alarm connection of rack- mounted module STAND-ALONE POWER CONNECTOR, 2-pin connector for power connection of stand-alone module; removable mating connector with screw terminals
Resumen del contenido incluido en la página 12
Installation PACKAGE CONTENTS The following items are supplied: 1 FT8316 transmitter or FR8316 receiver 1 Regulated switching power supply with either of the following: • Four plug adapters (North American, Australian, U.K., and European); 100-240 VAC, 50-60 Hz input, 12 VDC (25 W) output or • Three power cords (North American, U.K., and European); 100-240 VAC, 47-63 Hz input, 12 VDC (24 W) output 1 FT8316/FR8316 Fiber Transmitter and Receiver Installation manual (
Resumen del contenido incluido en la página 13
CONNECTIONS Connections to the FT8316 transmitter and FR8316 receiver are made on the rear panel of the modules and consist of the following: • Power connection NOTES: – A 12 VDC or 24 VAC power supply can be used to power the transmitter/receiver when used as a stand-alone module. A 12 VDC power supply is provided. If a 24 VAC power supply is used, the power supply must be a Listed Direct Plug-In Power Unit marked as Class 2 and rated as 24 VAC, 1 A (minimum output). – I
Resumen del contenido incluido en la página 14
Troubleshooting LED indicators on the front panel of the FT8316 transmitter and FR8316 receiver (refer to Figure 2 and to Figure 3, respectively) allow you to monitor signal status, laser status (transmitter only), and operating power. Table A provides information about the front-panel indicators and associated troubleshooting guidelines. Table A. Troubleshooting with Front-Panel Indicators Indicator Color Meaning Possible Cause Corrective Action Power LED (Pelco badge) Blue Pelc
Resumen del contenido incluido en la página 15
Table A. Troubleshooting with Front-Panel Indicators (Continued) Indicator Color Meaning Possible Cause Corrective Action Video Present LED (Continued) Red on receiver Incoming video Optical signal is not being Refer to the Optic Fault LED - signal is not present received from the trans- Receiver section in this on the channel. mitter. Optic Fault LED is table. also red. Video source is not Check power connection to powered on. the video source. Video source is not Check BNC
Resumen del contenido incluido en la página 16
Table A. Troubleshooting with Front-Panel Indicators (Continued) Indicator Color Meaning Possible Cause Corrective Action Optic Fault LED - Receiver Green The optical signal is – No action required. being received from the transmitter. Red The optical signal is Transmitter is not powered Check power connections. not being received on. Replace power supply if from the transmitter. necessary. Fiber optic cable is not Check fiber optic connected. connections. Fiber optic cable conne
