Resumen del contenido incluido en la página 1
3-619-676-13 (1)
Network Camera
User’s Guide
Software Version 1.4
SNC-VL10N/VL10P
© 2002 Sony Corporation
Resumen del contenido incluido en la página 2
If you have any questions about this product, you may Owner's Record call: The model and serial numbers are located at the bottom. Sony's Business Information Center (BIC) at Record these numbers in the spaces provided below. 1-800-686-SONY (7669) Refer to these numbers whenever you call upon your Sony dealer regarding this product. or Write to: Sony Customer Information Services Center Model No. ____________________ 6900-29, Daniels Parkway, PMB 330 Serial No. ____________________ Fort Mye
Resumen del contenido incluido en la página 3
NOTICE TO USERS © 2002 Sony Corporation. All rights reserved. This manual or the software described herein, in whole or in part, may not be reproduced, translated or reduced to any machine readable form without prior written approval from Sony Corporation. SONY CORPORATION PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL, THE SOFTWARE OR OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WIT
Resumen del contenido incluido en la página 4
Lower Half of Sensor I/O Setting Page ............26 Table of Contents Others Assigning the IP Address to the Camera Using Overview ARP Commands ...................................................28 How to Use This Manual ...................................... 5 Assigning the IP Address .................................28 Precautions ............................................................. 5 Confirming the Setup ........................................28 Connecting the Camera to a Network
Resumen del contenido incluido en la página 5
Overview Precautions Operating or storage location Avoid operating or storing the camera in the following How to Use This Manual locations: Extremely hot or cold places (Operating temperature: This manual explains how to operate the SNC-VL10N/ -10°C to +50°C [14°F to 122°F]) VL10P Network Camera from a client PC. Exposed to direct sunlight for a long time, or close to This manual is written to be read on the computer heating equipment (e.g., near heaters) display. Close to sources of
Resumen del contenido incluido en la página 6
Other Functions on Login Page Operating the Camera Reset button Resets to the user name and password before typing. The Operating the Camera section explains how to Behind Firewall check box monitor the image from the camera using the Web If a firewall is on the network where the camera is browser. For setting the camera, see “Administrating the installed and you access the camera from outside the Camera” on page 13. firewall, select this check box. Then the “Firewall Viewer” opens to all
Resumen del contenido incluido en la página 7
Menu Section Configuration of Main Viewer Page FAQ When you log in with an access right other than Displays the FAQ page. Administrator, the Main Viewer page is displayed. See “When You Have Trouble — FAQ Page” on page When you log in as Administrator, select Home on the 12. Menu page (page 13) to display the Main Viewer page. This section briefly explains the functions of the parts and controls on the Main Viewer page. For a detailed Logoff explanation on each part or control, see the
Resumen del contenido incluido en la página 8
Image Control Section Monitoring the Image Image Size from the Camera Selects the image size. See “Selecting the image size” on page 9. Expansion About Viewers Selects the image expansion ratio. See “Expanding the image” on page 9. The Network Camera uses Wavelet algorithm to compress and transmit images. Therefore, in order to Frame Rate view images from the camera, you need to download Selects the frame rate to transmit images. See “Selecting the frame rate” on page 9. Active-X Control or
Resumen del contenido incluido en la página 9
Using an OS other than Windows such as Controlling the Monitor Image from Macintosh, UNIX and Linux or Netscape the Image Control Section Navigator Ver. 6.0 You can control the monitor image from the image Java Applet viewer is necessary. When you log in the control section on the viewer page. camera for the first time, click Java Applet on the Login page or the Main Viewer page to start the Java Applet Image control section viewer. (See “Controlling the Monitor Image Using the Java Ap
Resumen del contenido incluido en la página 10
selected in the Frame Rate box. In this case, contact See “Configuring the Sensor I/O Port — Sensor I/O your authorized Sony dealer. Setting Page” on page 25. Note Displaying the monitor image in monochrome Sensor 1 and Sensor 2 are disabled for the users whose access right is None. Select the Monochrome check box. By removing the check mark, the color monitor image is restored. Controlling the Monitor Image Freezing the monitor image Using the Menu Select the Singleshot check box. The m
Resumen del contenido incluido en la página 11
Focus Area Image Quality Use this function to focus on a portion of the monitor Selects the image quality from Level 0 to Level 9. A image by masking over the other portion. The focused higher level gives a higher quality image but the frame portion is called “forcus area.” By masking the image, rate becomes lower. the transmitting data size reduces and a higher frame rate is obtained. Note Image Quality does not appear in the menu when you Focus area view the monitor image using the Fir
Resumen del contenido incluido en la página 12
Controlling the Monitor Image Changing the Access Using the Java Applet Viewer Right — Re-login Page When you use an OS other than Windows, such as Macintosh, UNIX and Linux, click Java Applet on the Click Logoff in the menu control section of the viewer, Login page or the Main Viewer page. The Java Applet and the Re-login page is displayed. viewer starts. Use this page when you want to log in the camera again The image control section of the Java Applet viewer is as a user with a diffe
Resumen del contenido incluido en la página 13
Administrating the Camera Configuration of Menu Page The Administrating the Camera section explains how to set the functions of the camera by the Administrator. When you log in as Administrator, Welcome to SNC- For monitoring the camera image, see “Operating the VL10 Administration Page (Menu page) is displayed. Camera” on page 6. This section briefly explains the functions of the parts and controls on the Menu page. For a detailed explanation on each part or control, see the specified p
Resumen del contenido incluido en la página 14
Security Displays the Security Setting page. Configuring the System See “Setting the Security — Security Setting Page” on page 19. — System Setting Page Camera When you click System in the menu section, the System Displays the Camera Setting page. Setting page appears. See “Setting the Camera — Camera Setting Page” on Use this page to perform the principal settings of this page 20. unit. SMTP Displays the SMTP Setting page. See “Sending Images via E-mail at Alarm — SMTP Setting Page” on pa
Resumen del contenido incluido en la página 15
System(PC) Current Date&Time Displays the date and time set on your computer. Setting the User When you want to synchronize the camera’s date and time with the date and time setting of the computer, — User Setting Page operate as follows: When you click User in the menu section, the User Click Time Synchronization, and “Applied, OK” Setting page appears. window appears. Click OK to change the date and time Use this page to set the user names and passwords of on SNC-VL10 Current Date&Time
Resumen del contenido incluido en la página 16
Camera&Sensor Allows monitoring of the camera image and alarm Configuring the Network output by clicking Sensor 1 and Sensor 2 on the viewer page, and setting the camera on the Camera Setting — Network Setting Page page. When you click Network in the menu section, the Network Setting page appears. The access right for Administrator is fixed to All, Use this page to configure the network to connect the allowing access to all the functions of the software. camera and the computer. You can c
Resumen del contenido incluido en la página 17
xDSL Select MTU Size Select this option when you use a Digital Subscriber Select the MTU (Maximum Transmission Unit) from Line such as ADSL, VDSL and SDSL. the drop-down list: 1500 Bytes, 1300 Bytes, 1100 See page 18 for xDSL setting. Bytes, 900 Bytes, 700 Bytes or 500 Bytes. PSTN DNS1 Server IP Address Select this option when you use a conventional analog Type the IP address of DNS1 (Domain Name Server 1). telephone line. See page 18 for PSTN setting. DNS2 Server IP Address Type the IP add
Resumen del contenido incluido en la página 18
xDSL Interface PSTN Interface This menu is displayed when Select Network Interface This menu is displayed when Select Network Interface is set to xDSL. is set to PSTN. For setting the items in the LAN menu, see “LAN” on For setting the items in the LAN menu, see “LAN” on page 17. page 17. Network Type Displays the protocol being used for the xDSL connection or PPPoE (Point-to-Point Protocol over Ethernet). MAC Address Displays the MAC address of the camera. MAC Address Displays the MAC addre
Resumen del contenido incluido en la página 19
Disable/Enable Select Enable when you want to encrypt the image, or Setting the Security Disable when you do not want to perform the encryption. — Security Setting Page When you click Security in the menu section, the Encryption PIN Number Security Setting page appears. Type a PIN (Personal Identification Number) to allow Use this page to limit the computers that can access the displaying the monitor image of up to 11 characters. camera or encrypt the monitor image. When Image Encryption Mod
Resumen del contenido incluido en la página 20
Calibration Parameters Adjusts the image from the camera. Type the Setting the Camera adjustment value in each box. The adjustment range for — Camera Setting Page each item is displayed on the right of the box. Brightness (The users having the “Camera&Sensor” access right Adjust the brightness. can also access this page.) When you click Camera in the menu section, the Contrast Camera Setting page appears. Adjust the contrast. Use this page to set the functions of the camera. Hue Adjust t
