Manual de instrucciones de EverFocus 560 TVL Color Mini Dome Camera ED350

Resumen del contenido incluido en la página 1

EVERFOCUS

1/3” 560 TVL Color Mini Dome Camera
Operation Instructions



Model No. ED350





Please read this manual first for correct installation and operation. This manual should be retained
for future reference. The information in this manual was current when published. The
manufacturer reserves the right to revise and improve its products. All specifications are therefore
subject to change without notice.

PRECAUTIONS

1. Do not install the camera near electric or magn

Resumen del contenido incluido en la página 2

6. Cleaning Do not touch the surface of sensor by hand directly. Use a soft cloth to remove the dirt from the camera body. Use lens tissue or a cotton swab and ethanol to clean the sensor and the camera lens. 7. Do not operate the camera beyond the specified temperature, humidity or power source ratings. Use the camera at temperatures within 0℃ ~ 40℃ (32℉ to 104℉) and humidity between 20%~ 80%. The input power source is 12VDC/24VAC. PREFACE The High Resolution Dome Camera Series a

Resumen del contenido incluido en la página 3

SPECIFICATIONS Pickup Device 1/3'' SONY Super HAD CCD Video Format NTSC or PAL NTSC: 525 TV lines, 60 fields/sec Scanning System PAL: 625 TV lines, 50 fields/sec Picture Elements 768 x 494(NTSC) ; 752 x 582(PAL) Horizontal Resolution 560TVL Sensitivity 0.5Lux/F=1.2 S/N Ratio Over 48dB(AGC off) Electronic Shutter 1/50(1/60)~1/100,000 Vari-focal lens, Auto Iris f=2.9~10mm, F=1.2 Lens Type f=3.8~9.5mm, F=1.2 f=9~22mm. F=1.6 *Lens models and availability vary in different region

Resumen del contenido incluido en la página 4

DIMENSIONS MAJOR PARTS NAME & THEIR FUNCTIONS 6 7 3

Resumen del contenido incluido en la página 5

(1) Camera Cover This cover will protect the camera from dust and damage. (2) Lens This Vari-Focal Lens allows users to adjust the Zoom and Focus manually. (3) Base The camera unit is set in the dome base when it is shipped from the factory. (4) Focus Ring To set the focus, loosen the Focus ring knob first, then turn the ring toward < ∞> or as necessary. When the focus is obtained as desired, tighten the focus ring knob. (5) Zoom Ring Loosen the zoom ring knob, then yo

Resumen del contenido incluido en la página 6

LENS ADJUSTMENT Zoom and focus adjustments After the camera was installed, the zoom and focus of the lens must be adjusted. 1. Loosen the zoom ring knob, and then turn the ring towards or as necessary to obtain the desired view range. W side (Zoom out) The viewing range will be wider and the subject is smaller. T side (Zoom in) The viewing range will be smaller and the subject is larger. 2. Loosen the focus ring knob, then turn the ring towards <∞> or as

Resumen del contenido incluido en la página 7

ADJUSTMENTS 5 3 4 1 2 Audio (Optional) 6 (1) IRIS ALC Adjustment To select light metering method: Turn the IRIS ALC Adjustment VR counterclockwise for Average Metering. Turn the IRIS ALC Adjustment VR clockwise for Peak Metering. (2) IRIS Level Adjustment Brightness Level can be adjusted from the IRIS level VR while using the direct drive lens. Turn counterclockwise to L to get darker picture. Turn clockwise to H to g

Resumen del contenido incluido en la página 8

(3) Flickerless When picture flicker fiercely, turn FL on, then the camera will stabilize the speed of electronic shutter at 1/100(NTSC) or 1/120(PAL) automatically, and reduce the flicker immediately. The default setting is OFF. (4) Auto Gain Control Adjustment AGC ON: The sensitivity increases automatically when the light is low. AGC OFF: A low-noise picture is obtained under a low light condition. (5) Back Light Compensation Adjustment When the background of the subject is

Resumen del contenido incluido en la página 9

INSTALLATION 1. Remove the plastic dome cover. 2. Lossen the two screws of the supporting bracket to remove the camera body. 3. Use four screws to fix the camera base on the ceiling. 4. Put the camera body back to the supporting bracket, then tighten the two screws to fix the camera. 5. Connect the BNC connector of the camera to a color monitor, or other video device through a 75 ohm type coaxial cable with BNC female connector at cable extension. 6. Connect the 12VDC/24VAC regula

Resumen del contenido incluido en la página 10

EverFocus Electronics Corp. Europe Office: Head Office: Albert-Einstein-Strasse 1 12F, No.79 Sec. 1 Shin-Tai Wu Road, D-46446 Emmerich, Germany Hsi-Chih, Taipei, Taiwan TEL: 49-2822-9394-0 TEL: +886-2-26982334 www.everfocus.de FAX: +886-2-26982380 www.everfocus.com.tw China Office: Room B-05D-1, KESHI PLAZA , Shangdi USA L.A. Office: Information Industry Base, 1801 Highland Ave. Unit A Duarte, CA 91010, U.S.A. Haidian District, Beijing China 100085 TEL: +1-626-84