Resumen del contenido incluido en la página 1
ENG GER FRE SPA ITA TUR
SmartDome Camera User’s Guide
SCC-C6433(P)/C6435(P)
Resumen del contenido incluido en la página 2
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol indicates that dangerous 3. Do not connect multiple cameras to a single voltage consisting a risk of electric adapter. Exceeding the capacity may cause shock is present within this unit. abnormal heat generation or fire. This symbol indicates that there are 4. Sec
Resumen del contenido incluido en la página 3
ENG 9. If this product fails to operate normally, 7. Avoid aiming the camera directly towards contact the nearest service centre. Never extremely bright objects such as sun, disassemble or modify this product as this may damage the CCD image in any way. (SAMSUNG is not liable sensor. for problems caused by unauthorized 8. Apparatus shall not be exposed to modifications or attempted repair.) dripping or splashing and no objects 10. When cleaning, do not spray water filled with liquids, such
Resumen del contenido incluido en la página 4
Important Safety Instructions 1. Read these instructions. 13. Unplug this apparatus. When a cart is used, use caution when moving the 2. Keep these instructions. cart/apparatus combination to avoid 3. Heed all warnings. injury from tip-over. 4. Follow all instructions. 14. Refer all servicing to qualified service 5. Do not use this apparatus near water. personnel. Servicing is required when 6. Clean only with dry cloth. the apparatus has been damaged in any 7. Do not block any ventilation
Resumen del contenido incluido en la página 5
ENG Contents Overview ........................................................................................... 8 About this guide ............................................................................8 Product overview ...........................................................................8 Main features .................................................................................8 Components ...................................................................................8 CH
Resumen del contenido incluido en la página 6
DIGITAL ZOOM ........................................................................39 DISPLAY ZOOM .......................................................................40 DISPLAY P/T ............................................................................41 EXIT .........................................................................................41 Video set ...................................................................................... IRIS ................................
Resumen del contenido incluido en la página 7
ENG AUTO SET ...............................................................................66 AUX OUT CONTROL ...............................................................66 Other set ......................................................................................6 PROPORTIONAL P/T ..............................................................67 TURBO P/T ..............................................................................67 AUTO CAL .........................................
Resumen del contenido incluido en la página 8
Overview Special functions ❚ About this guide WDR to cover the full screen irregardless of its brightness This user guide includes basic instructions for DAY/NIGHT to improve the sensitivity by the product. It is recommended that all users automatic conversion into the black and white read this guide before use. mode at night or in the environment with low This guide is divided as follows: illumination “Overview” introduces the user guide and product White Balance to contro
Resumen del contenido incluido en la página 9
ENG NAMES OF EACH PART Your camera has the following components: 1. Camera Holder Adapter 2. Camera Body 3. Zoom Lens 4. Cover-dome 5. Alarm Output: N/O, COM, N/C, AO-2, AO-1, GND 6. Alarm Input (1~) : AI-8, AI-7, AI-6, AI-5,GND, AI-4, AI-3, AI-2, AI-1, GND 7. RS-45 : TXD+, TXD-, RXD+, RXD- . Power Input : 24V, EARTH, 24V . Video Output
Resumen del contenido incluido en la página 10
Installation ❚ Before installation THINGS TO KEEP IN MIND DURING INSTALLATION AND USE • Do not disassemble the camera on your own. • Always be careful when handling the camera. Do not strike the camera by your fists or shake it. Please be careful not to be careless when storing and operating it. • Do not place or operate the camera in any wet environment such as rain or wet surfaces. • Do not clean the camera with rough sandpaper . Please always use a dry cloth when cleaning it. • Put the cam
Resumen del contenido incluido en la página 11
ENG SETTING COMMUNICATION PROTOCOL Use number 1~4 PIN of SW702 to set communication Protocol. A : SAMSUNG HALF PIN PIN1 PIN PIN PIN B : SAMSUNG FULL Comp A OFF OFF OFF OFF B ON OFF OFF OFF C OFF ON OFF OFF D ON ON OFF OFF E OFF OFF ON OFF F ON OFF ON OFF X100 X10 X1 G OFF ON ON OFF H ON ON ON OFF I OFF OFF OFF ON J ON OFF OFF ON K OFF ON OFF ON L ON ON OFF ON M OFF OFF ON ON N ON OFF ON ON O OFF ON ON ON P ON ON ON ON 10 11
Resumen del contenido incluido en la página 12
BAUD RATE SETTING Use PIN 5 and 6 of SW702. BAUD RATE PIN 5 PIN 6 4800 BPS ON ON 9600 BPS OFF ON 19200 BPS ON OFF 38400 BPS OFF OFF The factory default setting is set to 9600BPS. 1 1
Resumen del contenido incluido en la página 13
ENG SETTING RS-A/RS-8 TERMINA TION As it is shown in the structure map, when Controller and RS-422A/RS-485 is connected, it should be terminated according to the Cable feature of impedance on the each end of the transmitting line to transfer the signals in long distance by controlling the reflection of the signals to the lowest. Division n < Termination TX+(DATA+) Controller SW1-ON TX-(DATA-) RX+ RX- RX+ RX- RX+ RX- RX- RX+ CAM 1 CAM CAM n-1 CAM n
Resumen del contenido incluido en la página 14
n < Division SW1-ON Controller SW-ON Division CAM 1 CAM CAM n-1 CAM n Note A communication error may occur if you connect multiple cameras that are assigned the same address in the network. 1 1
Resumen del contenido incluido en la página 15
ENG ❚ Adapter cable connection SCC-C6 Adapter Board 1 1
Resumen del contenido incluido en la página 16
❚ Cable connection 1. First, connect one end of the BNC video cable connector to the Video Output Terminal (VIDEO OUT). . Then, connect the other end of the connector to the Video Input Terminal of the monitor. Video terminal on the rear of monitor BNC Cable 16 1
Resumen del contenido incluido en la página 17
ENG . Connect the Power Adapter to the Power Cable of the camera. . Adjust the switch on the Power Adapter to the proper voltage. Then, connect the Power Adapter's plug to the Power Connector. Power Selection Switch under the Power Adaptor Power Selection Switch under the Power Adaptor 16 1
Resumen del contenido incluido en la página 18
. Connect the Remote Control Terminal of the camera and the external Controller. Adapter Cable Controller 18 19
Resumen del contenido incluido en la página 19
ENG ❚ Installationprecautions 1. Make sure that the installation site can sufficiently support a minimum of four times the net weight of the SCC-C6435(P)/6433(P) SmartDome camera and other accessories. 2. Install in an area where the space above the ceiling board is over 18 cm (7 in.) high. 3. Use the supplied screws to fasten the camera to the bracket assembly. 4. Keep persons away from the installation area, as there is a risk of falling objects. Also, move valuables to a safe locatio
Resumen del contenido incluido en la página 20
2. WALL MOUNT ADAPTOR ( SADT-104WM) This adaptor is used for installing the SmartDome camera on an indoor wall. 3. HANGING MOUNT ADAPTOR ( SADT-100HM) This adaptor is used for installing the SmartDome camera to an outdoor wall or a ceiling and used with CEILING MOUNT ADAPTOR(SADT-100CM). 20 21
