Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
58B Table of Contents 1. Safety Instructions ............................................................................. 1 1.1 Work Area Safety .................................................................... 1 1.2 Electrical Safety ....................................................................... 1 1.3 Personal Safety ........................................................................ 2 2. Description, Specifications and Tool Components ..........................
Resumen del contenido incluido en la página 3
Safety Instructions Work Area Safety 1. Safety Instructions IMPORTANT: To prevent electric shock, fire and/or personal injury or damage, read this user ’s manual first and observe the following safety instructions. 1. 6B 1 Work Area Safety 60BAlways perform automotive testing in a safe environment. 61BKeep your work area clean and well lit. Cluttered benches and dark areas may cause accidents. 62BKeep clothing, hair, hands, tools, test equipment, et
Resumen del contenido incluido en la página 4
Safety Instructions Personal Safety 1.3 Personal Safety 75BDo not use the tool while tired or under the influence of drugs, alcohol, or medications. A moment of interruption can result in serious personal injury. D 76B o not over-reach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations. 77BAlways wear safety eye protection that meets ANSI standards. 78BDo not wear
Resumen del contenido incluido en la página 5
Description, Specification and Tool Components Description 2. Description, Specifications and Tool Components 2 9B .1 Description The 83B Inspection Camera is an ideal and powerful tool for inspecting difficult-to-reach areas normally hidden from sight. It is a completely digital platform that features the function of capturing and recording photos and videos either on its internal memory or on removable SD cards (not included). The ergonomic tool not only features a 3.5" full
Resumen del contenido incluido en la página 6
Installation and Connection Description Im 98B age controls 99BZoom, low light vision 98BLighting 99BFully adjustable LED 1m 1103B (3') -- expandable to 6m (19') 102BCable reach w/optional extensions (not included) 98BImager head 99B8.5mm (0.33") 106Bwaterproof 107BImager head and cable to 3m (10') 102BAdditonal ports 103BUSB, video out and earphone ports Main unit: 32° F to 113° F (0° C to 45° C); Operating temp. Cable: 14° F to 176° F (-10°C to 8
Resumen del contenido incluido en la página 7
Installation and Connection Tool Components 2.4 Tool Components 110B Note: Because of continuing improvements, actual product may differ slightly from photo. The Inspection Camera comes with the following items: Fig. 1 1) LCD Screen – Indicates still images and videos. 2) 112BCable – Connects to the tool while in use. 3) 113BCable Connector – Connects the display unit to the imager head and cable. 4) 114BImager Head – Connects to the cable to view real
Resumen del contenido incluido en la página 8
Installation and Connection Tool Components Fig. 2 6) Accessory Magnet – Picks up small metal objects such as dropped rings or screws on the floor. 7) A 117B ccessory Hook – Unclogs obstacles and picks up wires in pipes or confined areas. 8) 118BAccessory Mirror – Helps users look around corners and see inside difficult to reach areas. 12B2.5 Buttons and Ports Fig. 3 A. Power Button – Turns on/off the tool. B. 120BSetting/Back Button – Moves to the
Resumen del contenido incluido en la página 9
Installation and Connection Tool Components E. 124BTrash Can/Reverse Button – Deletes captured photos and videos in the play mode. Pressing again will control the direction of the real-time image and video in the live screen. The real-time image and video will do a horizontal reverse or a vertical reverse. F. LEFT Arrow LED Lighting Adjusting Button – Uses left arrow button to decrease LED brightness in the camera mode. G. RIGHT Arrow LED Lighting Adjusting
Resumen del contenido incluido en la página 10
Installation and Connection Accessories Installation 3. Installation and Connection 14B3.1 312BThe Imager Head and Cable Installation 143BTo use the tool, the imager head and cable must be connected to the display unit. To connect the cable to the display unit, make sure the key and slot (Fig. 4) are properly aligned. Once they are aligned, slide the connecting sleeve up to the threads on the cable, and finger-tighten to hold the connection firmly in place. F
Resumen del contenido incluido en la página 11
Installation and Connection Accessories Installation 3.2 Accessories Installation T 144B he three accessories include a magnet, a hook and a mirror (Fig. 2). All are attached to the imager head in the same manner. Hold the imager head as shown in Fig. 5. Fig. 5 Slip the end of the accessory over the tip of the imager head to fix the accessory as shown in Fig. 6. Fig. 6 9
Resumen del contenido incluido en la página 12
Installation and Connection SD Card Installation 3.3 SD Card Installation NOTE: The SD card slot provides for additional memory. The SD card is optional and not included. Different SD cards can be used to insert into the SD card slot. T145BTo insert an SD card into the SD card slot, make sure the contacts are facing towards the slot and the angled portion of the card is facing down. When the SD card is installed, a small SD card icon will appear at the top ri
Resumen del contenido incluido en la página 13
Installation and Connection Video-Out Cable Connection 3. 16B 5 Video-Out Cable Connection Insert the video-out cable into the video-out port of the tool and the other end of the cable into the video-in port of a TV. The LCD screen will output a high quality real-time image. 16B3.6 Earphone Connection Connect an earphone with microphone (optional, not included) to the earphone port of the tool. Speak into the microphone to record your voice. 11
Resumen del contenido incluido en la página 14
Battery Charging Precautions Battery Charging Safety 4. Battery Charging Precautions IM 146B PORTANT: To reduce the risk of serious injury, read these precautions and the label on the charger carefully before using. Lithium batteries store a large amount of energy and will vent fire or explode if mistreated. 18B4.1 Battery Charging Safety 147BDo not probe charger with conductive objects. 148BDo not use the charger if it has been dropped or damaged in any way. 14
Resumen del contenido incluido en la página 15
Battery Charging Precautions Charger Inspection 4.3 Charger Inspection CAUTION: Before using, inspect the charger and correct any problems. Set up the charger according to these procedures to reduce the risk of injury from electric shock, fire and other causes, and to prevent tool damage. 1) 172BMake sure the charger is unplugged. Inspect the power cord and charger for damage or modifications, or broken, worn, missing, misaligned or binding parts. If any problems
Resumen del contenido incluido en la página 16
Battery Charging Precautions Battery Charging Procedures Fig. 8 There are two means of charging battery: 1) To charge the battery with the charger: Locate the DC power source port of the tool. With dry hands, connect the tool to the charger and plug in the charger to start charging. 2) To charge battery by USB cable: Locate the USB port of the tool. With dry hands, connect the tool to a PC with the USB cable to start charging. The battery will begin charging automatic
Resumen del contenido incluido en la página 17
Operation Instructions Basic Operation 3B5. Operation Instructions 190BIMPORTANT: Always wear safety eye protection to protect your eyes against dirt and other objects. Follow the operation instructions to reduce the risk of injury from electric shock, entanglement and other causes. 5 22B .1 Basic Operation NOTE: When in operation, the cable can be bent into a specific shape. This may help to maneuver the cable into confined areas. 1) Hold the tool with t
Resumen del contenido incluido en la página 18
Operation Instructions Operation Precautions 12) Connect the optional earphone with microphone to the earphone port of the tool. Speak into the microphone to record your voice. 5.2 Operation Precautions 191BUse the tool only as directed. Do not operate the tool unless the user’s manual has been read thoroughly and proper training has been completed. 192BThe display unit is not waterproof. The imager head and cable are waterproof, but not acid-proof or firepro
Resumen del contenido incluido en la página 19
Operation Instructions Tool Inspection breakage and any other condition which may affect its operation. 204BUse only accessories that are recommended by the manufacturer for the tool. 205BDry your hands before operating the tool or charging the battery. A 206B lways use appropriate personal protective equipment while handling and using the tool. Appropriate personal protective equipment always includes safety glasses and gloves, and may include latex
Resumen del contenido incluido en la página 20
Operation Instructions Tool and Work Area Set-Up Turn on the power and make sure the tool starts up as described in the Basic Operation section. 218BIf the tool does not work well after turning it on, have the tool checked by a qualified technician. Any tool that cannot be controlled with the power button is dangerous and must be repaired. 219BNOTE: Please check following methods to avoid injury. 220BFOR WALLS: For inspecting inside walls, shut off the circuit
