Manual de instrucciones de Turbosound TSB-110

Resumen del contenido incluido en la página 1

TSB-110
SUB-BASS LOUDSPEAKER

QUICK START GUIDE


















Turbosound Ltd.
Star Road, Partridge Green
West Sussex RH13 8RY England
Tel: +44 (0)1403 711447 Fax: +44 (0)1403 710155
web: www.turbosound.com

Version 1.1 ©Turbosound 8/2008

Resumen del contenido incluido en la página 2

quick start TSB-110 TSB–110 CONFIGURATIONS The TSB-110 is a general purpose band-pass subwoofer designed to add low frequency reinforcement to Turbosound loudspeakers such as the IMPACT50, IMPACT80, TCS-30, TCS-35, TXD-081 and TQ-308. The TSB-110 utilises a dual voice-coil 10” low frequency driver with two configurable 4 ohm voice coils. In its ‘as shipped’ configuration the two inputs and two outputs are set up so that the bass cabinet can be driven by the left and right channel of a

Resumen del contenido incluido en la página 3

quick start TSB-110 Locate the four jumper locations on the circuit board, labelled J1, J2, J3, and J4. The unit is shipped with J2 and J4 connected with J1 and J3 not connected (dual 4 ohm mode). For single 8 ohm operation unplug J2 and J4 and transfer the jumpers to J1 and J3. This connects the two voice coils in series and transfers the input to the left input only (pins 1+ and 1- on the Speakon NL4MP). Note: In single coil mode DO NOT use the right inputs and outputs as this will resul

Resumen del contenido incluido en la página 4

quick start TSB-110 WARRANTY Limited Warranty This Turbosound loudspeaker product is warranted to the original end-user purchaser and all subsequent owners for a period of two (2) years for loudspeakers from the original date of purchase. Warranty Coverage Warranty coverage includes defects in materials and workmanship. It does not include: • damage caused by accident, misuse, abuse, neglect or modification by any person other than an authorised Turbosound representative, • damage c