Resumen del contenido incluido en la página 1
INTEGRATED CIRCUITS
DATA SHEET
TDA2611A
5 W audio power amplifier
November 1982
Product specification
File under Integrated Circuits, IC01
Resumen del contenido incluido en la página 2
Philips Semiconductors Product specification 5 W audio power amplifier TDA2611A The TDA2611A is a monolithic integrated circuit in a 9-lead single in-line (SIL) plastic package with a high supply voltage audio amplifier. Special features are: • possibility for increasing the input impedance • single in-line (SIL) construction for easy mounting • very suitable for application in mains-fed apparatus • extremely low number of external components • thermal protection • well defined open loop gain circ
Resumen del contenido incluido en la página 3
Philips Semiconductors Product specification 5 W audio power amplifier TDA2611A Fig.1 Circuit diagram; pin 3 not connected. RATINGS Limiting values in accordance with the Absolute Maximum System (IEC 134) Supply voltage V max. 35 V P Non-repetitive peak output current I max. 3 A OSM Repetitive peak output current I max. 1,5 A ORM Total power dissipation see derating curves Fig. 2 Storage temperature T - 55 to + 150 °C stg Operating ambient temperature T - 25 to + 150 °C amb November 1982 3
Resumen del contenido incluido en la página 4
Philips Semiconductors Product specification 5 W audio power amplifier TDA2611A Fig.2 Power derating curves. HEATSINK EXAMPLE Assume V = 18 V; R = 8 Ω; T = 60 °C maximum; T = 150 °C (max. for a 4 W application into an 8 Ω load, the P L amb j maximum dissipation is about 2,2 W). The thermal resistance from junction to ambient can be expressed as: 150 – 60 R = R ++ R R== --------------------- - 41 K/W. th j-a th j-tab th tab-h th h-a 22 , Since R = 11 K/W and R = 1 K/W, R = 41 - (11 + 1) = 29 K/W.
Resumen del contenido incluido en la página 5
Philips Semiconductors Product specification 5 W audio power amplifier TDA2611A D.C. CHARACTERISTICS Supply voltage range V 6 to 35 V P Repetitive peak output current I < 1,5 A ORM Total quiescent current at V = 18 V I typ. 25 mA P tot A.C. CHARACTERISTICS T = 25 °C; V = 18 V; R = 8 Ω; f = 1 kHz unless otherwise specified; see also Fig. 3 amb P L A.F. output power at d = 10% tot > 4W V = 18 V; R = 8 Ω P P L o typ. 4,5 W V = 12 V; R = 8 Ω P typ. 1,7 W P L o V = 8,3 V; R = 8 Ω P typ. 0,65 W P L o
Resumen del contenido incluido en la página 6
Philips Semiconductors Product specification 5 W audio power amplifier TDA2611A Fig.3 Test circuit; pin 3 not connected. Fig.4 Total harmonic distortion as a function of output power. November 1982 6
Resumen del contenido incluido en la página 7
Philips Semiconductors Product specification 5 W audio power amplifier TDA2611A Fig.5 Output power as a function of supply voltage. Fig.6 Input impedance as a function of frequency; curve a for C = 1 μF, R = 0 Ω; curve b for C = 1 μF, R = 1 kΩ; circuit of Fig. 3; C2 = 10 pF; typical values. November 1982 7
Resumen del contenido incluido en la página 8
Philips Semiconductors Product specification 5 W audio power amplifier TDA2611A Fig.7 Input impedance as a function of R in circuit of Fig. 3; C = 1 μF; f = 1 kHz. Fig.8 Total harmonic distortion as a function of R in the circuit of Fig. 3; P = 3,5 W; f = 1 kHz. S o November 1982 8
Resumen del contenido incluido en la página 9
Philips Semiconductors Product specification 5 W audio power amplifier TDA2611A Fig.9 Total power dissipation and efficiency as a function of output power. November 1982 9
Resumen del contenido incluido en la página 10
Philips Semiconductors Product specification 5 W audio power amplifier TDA2611A APPLICATION INFORMATION Fig.10 Ceramic pickup amplifier circuit. Fig.11 Total harmonic distortion as a function of output power; ─── with tone control; -- - without tone control; in circuit of Fig. 10; typical values. November 1982 10
Resumen del contenido incluido en la página 11
Philips Semiconductors Product specification 5 W audio power amplifier TDA2611A Fig.12 Frequency characteristics of the circuit of Fig. 10; ───── tone control max. high; -- - tone control min. high; P relative to 0 dB = 3 W; typical values. o Fig.13 Frequency characteristic of the circuit of Fig. 10; volume control at the top; tone control max. high. November 1982 11
Resumen del contenido incluido en la página 12
Philips Semiconductors Product specification 5 W audio power amplifier TDA2611A PACKAGE OUTLINE SIL9MPF: plastic single in-line medium power package with fin; 9 leads SOT110-1 D D 1 q A P P 2 1 A 3 q 2 q 1 A A 4 E pin 1 index c L 19 b Z e Q b w M 2 b 1 0 5 10 mm scale DIMENSIONS (mm are the original dimensions) (1) A 2 Z (1) (1) UNIT A Abc b b D D E eL P P Q q q q w A 3 4 1 2 1 1 1 2 max. max. 18.5 8.7 15.8 1.40 0.67 1.40 0.48 21.8 21.4 6.48 3.9 2.75 3.4 1.75 15.1 4.4 5.9 2.54 mm 3.7 0.25 1.0 17.8
Resumen del contenido incluido en la página 13
Philips Semiconductors Product specification 5 W audio power amplifier TDA2611A SOLDERING The device may be mounted up to the seating plane, but the temperature of the plastic body must not exceed the Introduction specified maximum storage temperature (T ). If the stg max printed-circuit board has been pre-heated, forced cooling There is no soldering method that is ideal for all IC may be necessary immediately after soldering to keep the packages. Wave soldering is often preferred when temperature
