Resumen del contenido incluido en la página 1
TS-E24mm f/3.5L TS-E24mm f/3.5L
TS-E45mm f/2.8 TS-E45mm f/2.8
TS-E90mm f/2.8 TS-E90mm f/2.8
E EN NG G
Instructions
C OP Y
Resumen del contenido incluido en la página 2
02-7544_ENG 10.2.13 9:42 AM Page 1 Thank you for purchasing a Canon product. Features Canon’s TS-E lenses are tilt-shift lenses designed for EOS cameras. The tilt-shift 1. The lens can be tilted up to ±8° and shifted up to ±11mm. mechanism enables photographers to control the depth of field and the area photographed 2. The tilt and shift functions can be used singly or in combination. and to correct image distortion, making it possible to take sophisticated pictures that 3. The lens can be rot
Resumen del contenido incluido en la página 3
02-7544_ENG 10.2.13 9:42 AM Page 2 a Safety Precautions This device complies with Part 15 of the FCC Rules. Operation is a Safety Precautions subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any ● Do not look at the sun or a bright light source interference received, including interference that may cause through the lens or camera. Doing so could result in undesired operation. loss of vision. Looking at the sun directl
Resumen del contenido incluido en la página 4
02-7544_ENG 10.2.13 9:42 AM Page 3 Nomenclature Tilt scale (→ 7) Infrared index (→ 11) Distance index Distance scale (→ 5, 11) Tilt index Depth-of-Field scale (→ 11) Lens mount index (→ 5) Tilt knob (→ 7) Contacts Shift knob (→ 9) Shift index Shift scale (→ 9) For detailed information, reference page numbers are provided in parentheses (→ **). ENG-3 C OP Y
Resumen del contenido incluido en la página 5
02-7544_ENG 10.2.13 9:42 AM Page 4 Nomenclature Tilt index Tilt scale (→ 7) Tilt lock knob (→ 7) Focusing ring (→ 5) Hood mount (→ 13) Shift index Rotation lock release button (→ 10) Lens Shift scale (→ 9) Shift lock knob (→ 9) Filter mounting thread (→ 14) For detailed information, reference page numbers are provided in parentheses (→ **). ENG-4 C OP Y
Resumen del contenido incluido en la página 6
02-7544_ENG 10.2.13 9:42 AM Page 5 1. Mounting and Detaching the Lens 2. Focusing See your camera’s instructions for details on mounting and detaching the lens. ● When mounting or detaching the lens, always ensure that the tilt and shift scales are set to the “0” position. ● After detaching the lens, place the lens with the rear end up to prevent the lens surface and contacts from getting scratched. ● If the contacts get soiled, scratched, or have Focus a TS-E lens by turning the focusing rin
Resumen del contenido incluido en la página 7
02-7544_ENG 10.2.13 9:42 AM Page 6 3. Tilt Function Tilting inclines the lens relative to the image plane. When the tilt scale is set to the “0” position, the focusing and imaging planes are parallel. However, tilting puts the focusing plane at an angle to the imaging plane. ● Example 1 ● Example 2 To shoot so that all of an extensive subject is in focus, you must normally use a small aperture to obtain a large depth of field. But tilting allows you to keep all of the subject in focus even whe
Resumen del contenido incluido en la página 8
02-7544_ENG 10.2.13 9:42 AM Page 7 Using Tilt Loosen the tilt lock knob by Turn the tilt knob to adjust Turn the tilt lock knob in the turning it in the direction of the amount of tilt. Focus the direction of the arrow to lock the arrow. shot by turning the focusing the amount of tilt for the ring. shot. ● When you tilt the lens, sharp portions of the tilt mechanism are exposed and care should be taken to avoid touching these portions. ● If you use the tilt and shift functions on the TS-E24mm
Resumen del contenido incluido en la página 9
02-7544_ENG 10.2.13 9:42 AM Page 8 4. Shift Function Shifting moves the optical axis of the lens in parallel off the center of the imaging plane. Shift can be used to good effect in the situations shown below. ● If you photograph a subject such as a ● When you are shooting a reflective building with a normal lens, the top of subject, you can move the camera to a the building tapers away. But by placing position where the camera does not the camera parallel to the building and appear in the sho
Resumen del contenido incluido en la página 10
02-7544_ENG 10.2.13 9:42 AM Page 9 Using Shift Loosen the shift lock knob Turn the shift knob to adjust Turn the shift lock knob in by turning it in the direction the amount of shift. Focus the direction of the arrow to of the arrow. the shot by turning the lock the amount of shift for focusing ring. the shot. ● When you shift the lens, sharp portions of the shift mechanism are exposed and care should be taken to avoid touching these portions. ● If you use the tilt and shift functions on the T
Resumen del contenido incluido en la página 11
02-7544_ENG 10.2.13 9:42 AM Page 10 5. Rotation The rotation function enables you to change the direction of tilt or shift by rotating the tilt-shift mechanism. With the lens mounted on the camera, push the rotation lock release button towards the mount and then turn the tilt-shift mechanism. ● The mechanism can be rotated through ±90°. The lens clicks every 30° and locks in place in the 90° position. ● When rotating the lens, set the tilt and shift scales to the “0” position. ● Note that rota
Resumen del contenido incluido en la página 12
02-7544_ENG 10.2.13 9:42 AM Page 11 6. Depth-of-Field Scale 7. Infrared Index (TS-E24mm f/3.5L) (TS-E24mm f/3.5L) The depth of field is the distance in front of and The infrared index corrects the focus setting behind the plane of focus on the subject that when using monochrome infrared film. Focus on appears sharp. The depth of field is indicated by the subject in MF, then adjust the distance the area between the depth-of-field scale lines setting by moving the focusing ring to the below the
Resumen del contenido incluido en la página 13
02-7544_ENG 10.2.13 9:42 AM Page 12 8. TS-E Tripod Adapter (Sold Separately) 9. Exposure With some camera models, the tilt, shift and Shots can be taken using AE (automatic exposure) as long as the tilt and shift scales are rotation functions can no longer be used when the camera is mounted directly on a tripod. set to the “0” position. The use of AE is not recommended when the When this happens, fit the optional TS-E tripod adapter into the tripod mount socket on the lens is tilted or shifted
Resumen del contenido incluido en la página 14
02-7544_ENG 10.2.13 9:42 AM Page 13 10. Hoods The EW-75B II, EW-79B II and ES-65 III lens hoods can keep unwanted light out of the lens, and also protects the lens from rain, snow, and dust. Attach the hood using the following procedure. TS-E24mm f/3.5L Turn the hood in the direction of the arrow to attach it securely. TS-E45mm f/2.8 • TS-E90mm f/2.8 1 1) Pressing the buttons on the base of the hood inwards, 2 push the hood onto the hood mount on the lens. 2) Release the buttons so that the ca
Resumen del contenido incluido en la página 15
02-7544_ENG 10.2.13 9:42 AM Page 14 Hoods 11. Filters (Sold Separately) You can attach filters to the filter mounting ● Part of the picture may be blocked if the hood is not attached properly. thread on the front of the lens. ● When attaching or detaching the hood, grasp ● Only one filter may be attached. the base of the hood to turn it. To prevent ● Use a polarizing Canon filter. deformation, do not grasp the rim of the hood to ● To adjust the polarizing filter, first remove the turn it. lens
Resumen del contenido incluido en la página 16
02-7544_ENG 10.2.13 9:42 AM Page 15 12. Extension Tubes 13. Close-up Lenses (Sold Separately) (Sold Separately) You can attach extension tube EF12 II or EF25 Attaching a 250D or 500D close-up lens enables II for magnified shots. The shooting distance close-up photography. Compatibility with close- and magnification are shown below. up lenses is as follows. TS-E24mm f/3.5L TS-E24mm f/3.5L • 250D: Cannot be used Focusing Distance Magnification (×) • 500D (72mm): 0.19 to 0.05× Range (mm) Close L
Resumen del contenido incluido en la página 17
02-7544_ENG 10.2.13 9:42 AM Page 16 Specifications TS-E24mm f/3.5L TS-E45mm f/2.8 TS-E90mm f/2.8 Focal Length/Aperture 24mm f/3.5 45mm f/2.8 90mm f/2.8 Lens Construction 9 groups, 11 elements 9 groups, 10 elements 5 groups, 6 elements Minimum Aperture f/22 f/22 f/32 Diagonal 84° 51° 27° Angle of View Vertical 53° 30° 15° 11’ (Normal) Horizontal 74° 44° 22° 37’ Min. Focusing Distance 0.3m (1.0ft.) 0.4m (1.3ft.) 0.5m (1.6ft.) Max. Magnification 0.14× 0.16× 0.29× 173 × 263mm 150 × 226mm 82 × 123m
Resumen del contenido incluido en la página 18
02-7544_ENG 12.7.11 11:16 AM Page 17 Specifications TS-E24mm f/3.5L TS-E45mm f/2.8 TS-E90mm f/2.8 Filter Diameter 72mm 58mm Max. Diameter and Length 78 × 86.7mm (3.1 × 3.4inch) 81 × 90.1mm (3.2 × 3.5inch) 73.6 × 88mm (2.9 × 3.5inch) Weight 570g (18.4oz) 645g (20.8oz) 565g (18.2oz) Hood EW-75B II EW-79B II ES-65 III Lens Cap E-72/E-72 II E-58/E-58 II Case LP1216 LP1016 ● The lens length is measured from the mount surface to the front end of the lens. Add 21.5 mm to include the E-58/E-72 lens ca
Resumen del contenido incluido en la página 19
00-8522(7544)H4_CID_Ver3.3 12.7.11 11:35 AM ページ 1 CT1-8522-004 1208SZ © CANON INC. 2006 C OP Y
