Resumen del contenido incluido en la página 1
FS-S57 COMPACT COMPONENT SYSTEM
MP3
5-CD
COMPACT COMPONENT SYSTEM
FS-S57—Consists of CA-FSS57 and SP-UXS57
5-CD CHANGER, PLAY & EXCHANGE
STANDBY/ON
13 2
VOLUME
AHB PRO
46 5
DISPLAY
DISC PLAY
CLOCK/
SELECT MODE AUX/DVD TREBLE 79 8
TIMER
REPEAT FM/AM BASS
CD 10 +10 SLEEP
BASS DISC UP TREBLE
CD1 CD2 CD3 CD4 CD5
SET DISC DOWN CANCEL
PLAY FM
MODE REPEAT MODE
A.STANDBY DIMMER AHB PRO
RDS
DISPLAY
5-CD CHANGER, PLAY&EXCHANGE
VOLUME
RM-SUXS57R REMOTE CONTROL
PHONES
INSTRUCTIONS
Resumen del contenido incluido en la página 2
Warnings, Cautions and Others Mises en garde, précautions et indications diverses For U.S.A. CAUTION This equipment has been tested and found to comply with the limits RISK OF ELECTRIC SHOCK for a Class B digital device, pursuant to part 15 of the FCC Rules. DO NOT OPEN These limits are designed to provide reasonable protection against harmful interference in a residential installation. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. This equipment generates, uses and can radiate ra
Resumen del contenido incluido en la página 3
1 CLASS 1 LASER PRODUCT 1 PRODUIT LASER CLASSE 1 2 CAUTION: Do not open the top cover. There are no user 2 ATTENTION: N’ouvrez pas le couvercle supérieur. Il n’y a serviceable parts inside the Unit; leave all servicing to aucune pièce réparable par l’utilisateur à l’intérieur de qualified service personnel. l’appareil; confiez toute réparation à un personnel qualifié. 3 CAUTION: Visible and invisible laser radiation when open 3 ATTENTION: Risque de radiations laser visible et invisible and inter
Resumen del contenido incluido en la página 4
Introduction We would like to thank you for purchasing one of our JVC products. Before operating this unit, read this manual carefully and thoroughly to obtain the best possible performance from your unit, and retain this manual for future reference. Power sources About This Manual •When unplugging the unit from the wall outlet, always pull This manual is organized as follows: on the plug, not the AC power cord. • This manual mainly explains operations using the DO NOT handle the AC power cord w
Resumen del contenido incluido en la página 5
Contents Location of the Buttons and Controls ............................. 3 Front Panel ................................................................................ 3 Remote Control ......................................................................... 5 Getting Started .................................................................. 6 Unpacking ................................................................................. 6 Connecting Antennas .....................................
Resumen del contenido incluido en la página 6
5-CD Location of the Buttons and Controls Become familiar with the buttons and controls on your unit. Front Panel 1 2 3 e 4 r 5 t VOLUME AHB PRO 6 DISC PLAY SELECT MODE AUX/DVD TREBLE 7 REPEAT FM/AM BASS y CD 8 CD1 CD2 CD3 CD4 CD5 9 u p q 5-CD CHANGER, PLAY&EXCHANGE PHONES w Front panel See pages in parentheses for details. p Disc eject buttons (10, 15, 16) 1 (standby/on) button and STANDBY/ON lamp CD10, CD20, CD30, CD40, and CD50 (10, 19) •Pressing one of these buttons also turns on the unit an
Resumen del contenido incluido en la página 7
Continued Display window on the front panel 1 2 3 45 6 7 8 AHB PRO DAILY 1 2 3 4 5 AUTO STEREO SLEEP STANDBY MONO CD PRGM RANDOM CD ALL Display window See pages in parentheses for details. 1 CD indicator (15) 2 Disc indicators (15) 3 Disc play mode indicators (18, 19) • PRGM (program), RANDOM, and Repeat mode ( , CD, ALL) 4 AUTO STANDBY indicator (10) 5 (Active Hyper Bass Pro) indicator (11) AHB PRO 6 FM mode indicators (13) • STEREO and MONO 7 Timer indicators • (timer) (9, 20, 21) • SLEEP (
Resumen del contenido incluido en la página 8
Location of the Buttons and Controls (continued) Remote Control See pages in parentheses for details. 1 Number buttons 2 BASS button (12) 3 Multi operation buttons • UP and DOWN • 4, 7, and ¢ 4 SET button (13, 14) 5 Source buttons STANDBY/ON • 3¥8 CD, FM/AM, and AUX 13 2 Pressing one of these buttons also turns on the unit. 8 6 Disc number buttons (16, 17) 46 5 DISPLAY 1 • CD 1, CD 2, CD 3, CD 4, and CD 5 9 CLOCK/ 79 8 Pressing one of these buttons also turns on the unit and TIMER p starts di
Resumen del contenido incluido en la página 9
Getting Started Continued To connect an outdoor FM antenna Unpacking Before connecting it, disconnect the supplied FM antenna. After unpacking, check to be sure that you have all the following items. The number in parentheses indicates the quantity of each Outdoor FM antenna piece supplied. (not supplied) • FM antenna (1) • AM loop antenna (1) • Remote control (1) Coaxial cable (not supplied) • Batteries (2) If any item is missing, consult your dealer immediately. Connecting Antennas FM antenna
Resumen del contenido incluido en la página 10
Getting Started (continued) AM antenna Connecting Speakers To connect speakers You can connect the speakers using the speaker cords. 1 1 ANTENNA 2 3,4 Vinyl-covered wire (not supplied) SPEAKERS RIGHT LEFT 2 Speaker Speaker cord cord AM loop antenna (supplied) 1 Connect the AM loop antenna to the AM LOOP terminals as illustrated. 2 Turn the AM loop antenna until you have the best reception. Right speaker Left speaker To connect an outdoor AM antenna 1 If the cords are covered with insulation, Whe
Resumen del contenido incluido en la página 11
NOW you are ready to plug in the unit and any To remove the speaker grilles The speaker grilles are removable as illustrated below: other connected equipment. IMPORTANT: Holes Projections Be sure to check that all connections have been made before plugging in the power cord. Putting the Batteries into the Remote Control Speaker grille Insert the batteries—R6(SUM-3)/AA(15F)—into the remote control by matching the polarity (+ and –) on the batteries with the + and – marking on the battery compartm
Resumen del contenido incluido en la página 12
Basic and Common Operations To show the clock when the unit is turned on Setting the Clock On the remote control ONLY: Before operating the unit any further, first set the unit’s clock. DISPLAY When you plug in the power cord, “AM 12:00” starts flashing Press DISPLAY. on the display. The clock indication appears on the display. You can set the clock when the unit is either turned on or in To return to the normal display, press DISPLAY standby mode. again. On the remote control ONLY: When playing
Resumen del contenido incluido en la página 13
Continued To turn off the unit automatically (Auto Standby) Turning On the Power Using the Auto Standby function, the unit automatically turns STANDBY/ON To turn on the unit, press STANDBY/ON itself off if no sound comes in for more than 3 minutes when (or on the unit). “CD” is selected as the source. The STANDBY/ON lamp on the unit lights If an operation is done within this 3-minute period, the Auto green. Standby function is canceled temporarily even though no •When you press the source but
Resumen del contenido incluido en la página 14
Basic and Common Operations (continued) Adjusting the Volume Reinforcing the Bass Sound You can adjust the volume level only while the unit is turned The richness and fullness of the bass sound is clearly on. The volume level can be adjusted between maintained regardless of how low you set the volume “VOLUME MIN” and “VOLUME 1” – “VOLUME 40 —Active Hyper Bass Pro. (VOLUME MAX).” •This function also affects the sound from headphones. On the remote control: AHB PRO To get the effect, press AHB PRO
Resumen del contenido incluido en la página 15
Adjusting the Tone Changing the Display Brightness You can adjust the bass level (low frequency range) and the You can change the display brightness only while the unit is treble level (high frequency range) within a range of “–5” to turned on. “+5.” When shipped, each level is set to “+2.” On the remote control ONLY: •This function also affects the sound from headphones. DIMMER Press DIMMER while the unit is turned on. •There is a time limit in doing the following steps. If the • Each time you
Resumen del contenido incluido en la página 16
Listening to FM and AM Broadcasts Tuning in to a Station Presetting Stations You can preset 30 FM and 15 AM stations manually. FM/AM 1 Press FM/AM to select either “FM” In some cases, test frequencies have been already stored or “AM.” for the tuner since the factory examined the tuner preset The unit automatically turns on and tunes in to function before shipment. This is not a malfunction. You the previously received station—either FM or can preset the stations you want into memory by following
Resumen del contenido incluido en la página 17
SET 4 Press SET again. To tune in to a preset station directly using the number “STORED” appears on the display for a buttons while. On the remote control ONLY: 13 2 Pressing the number button(s) allows you to select the preset number you want. 46 5 The tuned station in step 1 is stored in the preset number Ex.: For preset number 5, press 5. 79 8 selected in step 3. For preset number 15, press +10, • Storing a new station on an already assigned number then 5. 10 +10 erases the previously stored
Resumen del contenido incluido en la página 18
Playing Back Discs on the 5-CD Changer This unit has been designed to play back the following Loading Discs discs—CD, CD-R, and CD-RW. You can play back the discs containing the tracks in music CD format or MP3 files in ISO 9660 format. On the unit ONLY: • In this instruction, we call a disc recorded MP3 files “MP3 disc,” and “file” is also referred to as “track.” 1 Press one of the disc eject buttons (CD10 – CD50) for the disc tray you want to load a When playing CD-Rs or CD-RWs disc onto. • Be
Resumen del contenido incluido en la página 19
Continued 3/8 To stop play for a moment, press 3/8 CD. Playing Back All the Entire Discs CD While pausing, the elapsed playing time flashes —Continuous Play on the display. To resume play, press 3/8 CD again. You can play discs continuously. 1 Load discs into the 5-CD Changer. To stop during play, press 7. 2 Select a disc and start playback. On the remote control: To remove discs, press the corresponding disc eject buttons CD 1 Press one of the disc number (CD10 – CD50) on the unit. CD 2 button
Resumen del contenido incluido en la página 20
Playing Back Discs on the 5-CD Changer (continued) To go to another track directly using the number Basic Disc Operations buttons To exchange a disc during playback of another disc On the remote control ONLY: 13 2 On the unit ONLY: Pressing the number button(s) allows you 46 5 Press the disc eject buttons (CD10 – CD50) to eject a disc to start playing the track number on the not currently playing. 79 8 current disc. Ex.: For track number 5, press 5. CD1 CD2 CD3 CD4 CD5 10 +10 For track number 15
