Resumen del contenido incluido en la página 1
ES3628EA
24 10/100 Ports + 4G
L2/L3/L4 Intelligent Switch
Installation Guide
www.edge-core.com
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
Installation Guide 24 10/100 Ports + 4G L2/L3/L4 Intelligent Switch Layer 3 Standalone Switch with 24 100BASE-TX (RJ-45) Ports, 2 1000BASE-T (RJ-45) Ports, and 2 SFP Slots
Resumen del contenido incluido en la página 4
ES3628EA E112007-DT-R01 150200064200A
Resumen del contenido incluido en la página 5
Compliances and Safety Warnings FCC - Class A This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart B of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Op
Resumen del contenido incluido en la página 6
CE Mark Declaration of Conformance for EMI and Safety (EEC) This information technology equipment complies with the requirements of the Council Directive 89/336/EEC on the Approximation of the laws of the Member States relating to Electromagnetic Compatibility and 73/23/EEC for electrical equipment used within certain voltage limits and the Amendment Directive 93/68/EEC. For the evaluation of the compliance with these Directives, the following standards were applied: RFI Emission: • Limit
Resumen del contenido incluido en la página 7
Safety Compliance Warning: Fiber Optic Port Safety When using a fiber optic port, never look at the transmit laser while it is CLASS I powered on. Also, never look directly at the fiber TX port and fiber cable LASER DEVICE ends when they are powered on. Avertissment: Ports pour fibres optiques - sécurité sur le plan optique Ne regardez jamais le laser tant qu'il est sous tension. Ne regardez DISPOSITIF LASER jamais directement le port TX (Transmission) à fibres optiques et les DE CLASSE I em
Resumen del contenido incluido en la página 8
Before making connections, make sure you have the correct cord set. Check it (read the label on the cable) against the following: Power Cord Set U.S.A. and Canada The cord set must be UL-approved and CSA certified. The minimum specifications for the flexible cord are: - No. 18 AWG - not longer than 2 meters, or 16 AWG. - Type SV or SJ - 3-conductor The cord set must have a rated current capacity of at least 10 A The attachment plug must be an earth-grounding type with NEMA 5-15P (15 A, 12
Resumen del contenido incluido en la página 9
France et Pérou uniquement: Ce groupe ne peut pas être alimenté par un dispositif à impédance à la terre. Si vos alimentations sont du type impédance à la terre, ce groupe doit être alimenté par une tension de 230 V (2 P+T) par le biais d’un transformateur d’isolement à rapport 1:1, avec un point secondaire de connexion portant l’appellation Neutre et avec raccordement direct à la terre (masse). Cordon électrique - Il doit être agréé dans le pays d’utilisation Etats-Unis et Le cordon doit a
Resumen del contenido incluido en la página 10
Stromkabel. Dies muss von dem Land, in dem es benutzt wird geprüft werden: Schweiz Dieser Stromstecker muß die SEV/ASE 1011Bestimmungen einhalt- en. Europe Das Netzkabel muß vom Typ HO3VVF3GO.75 (Mindestanforderung) sein und die Aufschrift oder tragen. Der Netzstecker muß die Norm CEE 7/7 erfüllen (”SCHUKO”). Warnings and Cautionary Messages Warning: This product does not contain any serviceable user parts. Warning: Installation and removal of the unit must be carried out by qu
Resumen del contenido incluido en la página 11
Environmental Statement The manufacturer of this product endeavours to sustain an environmentally-friendly policy throughout the entire production process. This is achieved though the following means: • Adherence to national legislation and regulations on environmental production standards. • Conservation of operational resources. • Waste reduction and safe disposal of all harmful un-recyclable by-products. • Recycling of all reusable waste content. • Design of products to maximize recyclable
Resumen del contenido incluido en la página 12
viii
Resumen del contenido incluido en la página 13
Contents Chapter 1: Introduction 1-1 Overview 1-1 Switch Architecture 1-1 Network Management Options 1-2 Description of Hardware 1-2 100BASE-TX and 1000BASE-T Ports 1-2 SFP Slots 1-2 Status LEDs 1-3 Optional Redundant Power Supply 1-4 Power Supply Receptacles 1-4 Features and Benefits 1-5 Connectivity 1-5 Expandability 1-5 Performance 1-5 Management 1-5 Chapter 2: Network Planning 2-1 Introduction to Switching 2-1 Application Examples 2-2 Collapsed Backbone 2-2 Network Aggregation Plan 2-3 Re
Resumen del contenido incluido en la página 14
Contents Chapter 4: Making Network Connections 4-1 Connecting Network Devices 4-1 Twisted-Pair Devices 4-1 Cabling Guidelines 4-1 Connecting to PCs, Servers, Hubs and Switches 4-1 Network Wiring Connections 4-2 Fiber Optic SFP Devices 4-3 Connectivity Rules 4-4 1000BASE-T Cable Requirements 4-4 1000 Mbps Gigabit Ethernet Collision Domain 4-4 100 Mbps Fast Ethernet Collision Domain 4-5 10 Mbps Ethernet Collision Domain 4-5 Cable Labeling and Connection Records 4-5 Appendix A: Troubleshooting A-1
Resumen del contenido incluido en la página 15
Tables Table 1-1 Port Status LEDs 1-3 Table 1-2 System Status LEDs 1-4 Table 3-1 Serial Cable Wiring 3-8 Table 4-1 Maximum 1000BASE-T Gigabit Ethernet Cable Length 4-4 Table 4-2 Maximum 1000BASE-SX Gigabit Ethernet Cable Length 4-4 Table 4-3 Maximum 1000BASE-LX Gigabit Ethernet Cable Length 4-5 Table 4-4 Maximum 1000BASE-LH Gigabit Ethernet Cable Length 4-5 Table 4-5 Maximum Fast Ethernet Cable Length 4-5 Table 4-6 Maximum Ethernet Cable Length 4-5 Table A-1 Troubleshooting Chart A-1 Table A-2 P
Resumen del contenido incluido en la página 16
Figures Figure 1-1 Front and Rear Panels 1-1 Figure 1-2 Port LEDs 1-3 Figure 1-3 System LEDs 1-4 Figure 1-4 Power Supply Receptacles 1-4 Figure 2-1 Collapsed Backbone 2-2 Figure 2-2 Network Aggregation Plan 2-3 Figure 2-3 Remote Connection with Fiber Cable 2-4 Figure 2-4 Making VLAN Connections 2-5 Figure 2-5 IP Routing for Unicast Traffic 2-6 Figure 3-1 RJ-45 Connections 3-2 Figure 3-2 Attaching the Brackets 3-3 Figure 3-3 Installing the Switch in a Rack 3-4 Figure 3-4 Attaching the Adhesive Fe
Resumen del contenido incluido en la página 17
Chapter 1: Introduction Overview The ES3628EA 24 10/100 Ports + 4G L2/L3/L4 Intelligent Switch has 24 100BASE-TX ports, 2 1000BASE-T ports, and 2 SFP transceiver slots. There is also an SNMP-based management agent embedded on the main board. This agent supports both in-band and out-of-band access for managing the switch. This switch can easily tame your network with full support for Spanning Tree Protocol, Multicast Switching, Virtual LANs, and IP routing. It brings order to poorly perform
Resumen del contenido incluido en la página 18
Introduction 1 store-and-forward checking on each packet crossing the switch, routing traffic at wire speed using RIP or OSFP for unicast traffic, and DVMRP or PIM for multicast traffic. Network Management Options This switch contains a comprehensive array of LEDs for “at-a-glance” monitoring of network and port status. It also includes a management agent that allows you to configure or monitor the switch using its embedded management software, or via SNMP applications. To manage the switch
Resumen del contenido incluido en la página 19
Description of Hardware 1 Status LEDs The ES3628EA includes a display panel for key system and port indications that simplify installation and network troubleshooting. The LEDs, which are located on the front panel for easy viewing, are shown below and described in the following table. Port Link and Activity Figure 1-2 Port LEDs Table 1-1 Port Status LEDs LED Condition Status RJ-45 Ports 1-24 Link/Activity On Amber The port has a valid 10 or 100 Mbps link. Flashing Amber Flashing indicates
Resumen del contenido incluido en la página 20
Introduction 1 System Indicators Figure 1-3 System LEDs Table 1-2 System Status LEDs LED Condition Status Power On Green Internal power is operating normally. On Amber Internal Power supply fault. Off Power off or failure. Diag Flashing Green System self-diagnostic test in progress. On Green System self-diagnostic test successfully completed. On Amber System self-diagnostic test has detected a fault. Alternating Fan failure or system overheated. Amber & Green RPS On Green Redundant power supp
