Resumen del contenido incluido en la página 1
P3N1-E041-01EN
XG700 Hardware Guide
Resumen del contenido incluido en la página 2
Preface You have purchased the XG700, a compact, 12 port 10 Gigabit Ethernet layer 2 switch that achieves unsurpassed standards of high throughput and low-latency performance. This manual explains the procedures required to install your XG700 and should be read and understood before you start using your XG700. First edition (September 2005) All Rights Reserved, Copyright © PFU LIMITED 2005 Preface 1
Resumen del contenido incluido en la página 3
For Safe Use of the XG700 This manual contains important information to ensure the safe use of your XG700. Be sure to thoroughly read and understand its contents before attempting to use the XG700. After reading, store this manual in a safe place for future reference. PFU has made every effort to ensure the safety of the user and others, and to prevent property damage. When using the XG700, follow the instructions given in this manual. Warning notations Warnings are included throughout this manu
Resumen del contenido incluido en la página 4
This symbol indicates the possibility of serious or fatal injury if the XG700 is WARNING not used properly. For your safety and that of others, please follow these guidelines. Category Warning Danger of Never attempt to disassemble, dismantle, upgrade, or recycle the XG700 by yourself. electric shock Do not place objects on the XG700, as there is a risk of electric shock, fire, and/or damage. or fire Do not install the XG700 where it will be exposed to direct sunlight, close to a heating dev
Resumen del contenido incluido en la página 5
This symbol indicates the possibility of minor or moderate personal injury, as CAUTION well as damage to the XG700 and/or to other users and their property, if the XG700 is not used properly. Category Caution Danger of device Do not place the XG700 on its side or stack up multiple XG700s. Doing so may damage the XG700. damage Do not install the XG700 in an unstable place (such as on a slanted surface or a place subjected to vibrations). Doing so may damage the XG700. Do not place any objects
Resumen del contenido incluido en la página 6
No self maintenance Never attempt to dismantle or modify the XG700 yourself. This is extremely dangerous since the XG700 includes both high voltage and high temperature components. If maintenance is required, contact the vendor's service department. Warning label The following warning label may be found on the rear of XG700. Do not attempt to remove this warning label. If you cannot read the details written in the warning label because of dirt or wear, contact the vendor's service department for
Resumen del contenido incluido en la página 7
Electromagnetic compatibility FCC Class A CE Marking Safety CAN/CSA C22.2 No. 60950, UL60950 and EN60950 Static electricity Under certain conditions, twisted pair cables can become charged with static electricity. Con- necting a statically charged twisted pair cable to a device can cause the device or its LAN port to operate falsely or to become damaged. Use a static removal tool to discharge twisted pair cables to ground immediately before con- necting them to devices. Note that a discharged tw
Resumen del contenido incluido en la página 8
About This Manual This section explains who this manual is aimed at, describes the layout of the manual, and gives a description of the symbols used in this manual. Targeted reader and expected knowledge This manual is written for an administrator who has responsibility for network system configu- ration, maintenance, and management. Understanding the following knowledge is expected. • Basic knowledge of networks, intranets and the internet. • Basic knowledge of system management. • Basic knowle
Resumen del contenido incluido en la página 9
Symbols used in this manual This manual uses the following symbols. This symbol indicates a point that operator should pay attention Attention Attention to. This symbol indicates supplemental information. Note This symbol indicates a section which describes related informa- tion. Refer Refer This symbol means "Danger! You are in a situation that could WARNING result in bodily injury". Before continuing, make yourself aware of the hazards involved and become familiar with common ways of preve
Resumen del contenido incluido en la página 10
Contents Preface .........................................................................................................1 For Safe Use of the XG700 ..........................................................................2 1 Warning notations .............................................................................................. 2 No self maintenance .......................................................................................... 5 Warning label ..............................
Resumen del contenido incluido en la página 11
Appendix............................................................................................. 35 Appendix-A Specifications ...................................................................................36 A.1 Product Specifications ................................................................................ 36 A.2 Installation Specifications ........................................................................... 36 10 Contents
Resumen del contenido incluido en la página 12
Installation This chapter lists the items that should be in the XG700 package, describes the names and functions of the various components of the XG700. 1 1-1 Parts List.................................................................................................12 1-2 XG700 Components ...............................................................................14 1-3 Labels .....................................................................................................17
Resumen del contenido incluido en la página 13
1-1 Parts List Before proceeding, check that all of the following parts were included in your XG700 package. Contact the vendor's service department if any parts are missing and/or the manual has any miss- ing or wrongly collated pages. Keep the hardware guide (this manual) and the CD-ROM in a safe place. 1 2 3 4 5 6 7 8 9 10 11 12 XG700 CD-ROM Power code Serial Cross Cable Hardware Guide (this manual) Rack Mounting Brackets × 2 Rack Mounting Bracket BR Rack Mounting Bracket BL Wrist Strap Rail
Resumen del contenido incluido en la página 14
• Rack Mounting Brackets Brackets for mounting the XG700 in a rack. Attach each rack mounting bracket to the right and left sides of the XG700, and fasten to the rack posts with the rack screws (large). • Rack Mounting Bracket BR A bracket for mounting the XG700 in a rack. Attach the rack mounting bracket BR to the back-right side of the XG700, and 1 fasten to the rail (attached to the back-right rack post) with the rack screws (small). • Rack Mounting Bracket BL A bracket for mounting the XG700
Resumen del contenido incluido en la página 15
1-2 XG700 Components This section explains the names and functions of the various XG700 components, including the various indicator LEDs. XG700 front The following explains the names and functions of the components at the front of the XG700. Dump Switch (Dump) Mng-LAN Speed LED Alarm LED (Alarm) Power LED Serial Port Status LED (Power) Mng-LAN Link LED (Status) Port 11 Port 10 Port 12 Console RS-232 Mng-LAN 1 2 3 4 5 6 7 8 9 10 11 12 Port 1 Port 3 Port 5 Port 7 Port 9 Port 8 Port 2 Port
Resumen del contenido incluido en la página 16
XG700 rear The following explains the names and functions of the components at the rear of the XG700. Power Unit Rear Fan Unit Power Unit Power Switch Power Switch 1 FAN Power Inlet Power Inlet Rear Fan LED Power Unit LED Power Unit LED • Power Switch Used to turn the XG700 on/off. • Power Supply Unit Supplies power to the XG700 (includes an exhaust fan). - Power Supply LED (Green/Orange) Green LED lights when the XG700 is on. Orange LED lights when there is a problem with the Power Supply U
Resumen del contenido incluido en la página 17
Display LEDs There are three main indicator LEDs on the front of the XG700: Power LED, Alarm LED, and Status LED. The following explains the LED display under various conditions. LED XG700 Condition Power Alarm Status Off Off Off Off Starting up Power just turned on On On Off System starting up On Off *1 Blinking System start-up completed On Off *1 On Operable On Off *1 On After shutdown On Off*1 Off *1: If the XG700 is operating normally. If a problem occurs, the front panel LEDs and the LEDs o
Resumen del contenido incluido en la página 18
1-3 Labels A warning sticker, product nameplate, product ID label, and MAC label are to be found in various places on the XG700. 1 Warning Sticker Top view of XG700 Product ID Label MAC Label Product Nameplate Right view of XG700 Warning sticker Obey the following warning: Labels 17
Resumen del contenido incluido en la página 19
Product nameplate This indicates the model, part number, serial number, etc. Rev. Model MODEL. 0 1 2 3 4 5 6 7 8 9 ****** Label Part Number PART NO. PA ***** 0 1 2 3 4 5 6 7 8 9 Serial Number SER NO. P ****** 0 1 2 3 4 5 6 7 8 9 1 50/60Hz **** Kg 100-240V *** **** A/INPUT PFU Limited MADE IN JAPAN a FUJITSU company Product ID Label This indicates the model and serial number. MODEL *****
Resumen del contenido incluido en la página 20
Installation and Operation This chapter explains how the user should proceed from installation to operation of the XG700. 2 2-1 Installation Overview ..............................................................................20 2-2 Installation Procedure.............................................................................21 2-2-1 Installation requirements............................................................21 2-2-2 Installing the XG700 in a rack............................
