Resumen del contenido incluido en la página 1
R
NETWORK 1275 Danner Dr Tel:330-562-7070
TECHNOLOGIES Aurora, OH 44202 Fax:330-562-1999
www.nti1.com
NTI INCORPORATED
UNIMUX-USBV-2 (2-Port USB KVM Switch)
INSTALLATION / USER GUIDE
MAN027 Rev Date 1/14/2003
Resumen del contenido incluido en la página 2
WARRANTY INFORMATION The warranty period on this product (parts and labor) is one (1) year from the date of purchase. Please contact Network Technologies Inc at (800) 742-8324 (800-RGB-TECH) in the US and Canada or (330) 562-7070 (worldwide) for information regarding repairs and/or returns. A return authorization number is required for all repairs/returns. COPYRIGHT Copyright © 2003 by Network Technologies Inc. All rights reserved. No part of this publication may be reproduced, stored in a
Resumen del contenido incluido en la página 3
INTRODUCTION INTRODUCTION The UNIMUX-USBV-2 (formerly referred to as KEEMUX-USBV-2U) USB KVM switch allows one user to access two USB CPUs with only one USB keyboard, USB mouse, and 15HD VGA monitor. Internal microprocessors allow both CPUs to boot simultaneously and error-free. Port selection is accomplished by a front panel push button or commands typed on the keyboard. Types of User Input Devices Supported: ® • USB keyboard with Windows layout • USB keyboard with SUN layout • USB keyboard w
Resumen del contenido incluido en la página 4
FEATURES AND FUNCTIONS FEATURES AND FUNCTIONS 1. 5VDC- connection jack for the AC adapter 2. USB DEVICES- USB type A female receptacles- for connection of user USB device(s) 3. CPU Status/Mode LEDs- for visual indication of switch conn
Resumen del contenido incluido en la página 5
INSTALLATION INSTALLATION 1. It is not necessary to turn OFF power to either of the CPUs that will be connected to the UNIMUX-USBV-2 USB KVM switch before connecting or disconnecting any cables. NOTE: If a CPU needs to identify a keyboard, it will be necessary to power ON the CPU after it is connected to the UNIMUX-USBV-2 USB KVM switch and only after the keyboard is connected and the UNIMUX-USBV-2 USB KVM switch is powered ON. 2. Connect a USB keyboard to a femal
Resumen del contenido incluido en la página 6
5. Using a USB-AB-x-MM cable connect the USB type A device port of a USB CPU to the USB type B port labeled "CPU 1" on the UNIMUX-USBV-2 USB KVM switch. 6. Using a VEXT-xx-MM connect the video port of the same USB CPU connected in step 5 to the female 15HD port labeled "VIDEO 1" on the UNIMUX-USBV-2 USB KVM switch . Be sure to tighten the two screws on the cable connector to the UNIMUX-USBV-2 USB KVM switch securely. 7. Repeat steps 5 and 6 for connecting a second USB
Resumen del contenido incluido en la página 7
POWER-UP SEQUENCE The UNIMUX-USBV-2 USB KVM switch can be powered at any time. The CPUs can be powered at any time although if a CPU needs a keyboard and/or mouse at power-ON it should be powered after connecting to and powering-ON the UNIMUX-USBV-2 USB KVM switch. USB devices (keyboard and mouse) can be hot plugged to and from the UNIMUX-USBV-2 USB KVM switch at any time. Remember, the last attached device is the active one. USING THE NTI SWITCH USING THE NTI SWITCH The NTI UNIMUX-USBV-2
Resumen del contenido incluido en la página 8
Command Mode Function: Keystroke: KEY SYMBOLS LEGEND: (select the next higher port Increment Port I or ex. 01 02) or PRESS EITHER KEY CHORDED SEQUENCE- PRESS CONSECUTIVELY + AND KEEP KEYS PRESSED UNTIL ALL ARE PRESSED. (select the next lower port Decrement Port - PRESS CONSECUTIVELY D or ex. 02 01) (When toggled to ON, Scan Mode will be indicated the LED for only the active CPU Toggle Scan Mode flashing ON and OFF .) S ON and OFF (xxx from 002 to 255. ie. t002 (0-2) (0-9) (
Resumen del contenido incluido en la página 9
Scan Mode Scan Mode is indicated by a flashing CPU port LED. In Scan Mode the switch scans back and forth between ports making the CPU connected to the port with the flashing LED active. That connected port will remain active while in use. When the connected port becomes idle for the user selected time out period (default time is 5 seconds), the UNIMUX-USBV-2 USB KVM switch will connect to the other CPU port. See Command Mode section on page 5 for configuring the scan time out period. Fig.
Resumen del contenido incluido en la página 10
KEYBOARD FEATURES KEYBOARD FEATURES The keyboard configuration of each CPU is saved in the NTI UNIMUX-USBV-2 USB KVM switch. For example, if the CPU attached to Port 2 had CAPS LOCK and NUM LOCK selected the last time that CPU was accessed, then they will automatically be set when that CPU is accessed again. (See Fig. 4 on page 9 for reference.) Keyboard-To-Computer Translation The NTI UNIMUX-USBV-2 USB KVM switch enables a mixture of otherwise incompatible peripheral computer components to be
Resumen del contenido incluido en la página 11
Fig. 4 ( #
$ # 7 # 5 # 7 ( " 5 # 7 3 3 ( " ! ! ! " ! # ! 9 ' 7 $ ! # 7 & ! # !
" 7 1 ! ( #
$ 4 # 7 # 5 # 7 ' (
Resumen del contenido incluido en la página 12
It is also possible to configure the UNIMUX-USBV-2 USB KVM switch to emulate a specific international Sun keyboard regardless of what actual keyboard is connected. This is recommended when the CPU needs the layout code (i.e. a SUN CPU) and the keyboard doesn't have an explicit layout code (i.e. some Windows keyboards). To do this, manually set the UNIMUX-USBV-2 USB KVM switch to indicate the international keyboard identification number to the CPU using the following procedure; 1.
Resumen del contenido incluido en la página 13
TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS USB Type B USB Type A VGA Video Pin # Signal Pin # Signal Pin # Signal Pin # Signal 1RED 9NC 1+VCC 1 +VCC 2 GREEN 10 GND 2- DATA 2- DATA 3BLUE 11 ID0 3+DATA 3+DATA 4ID2 12 ID1 4GND 4GND 5TST 13 HS 6RED GND 14 VS 7 GREEN GND 15 ID3 8BLUE GND Mating face of a 15HD female Mating face of a USB Type B Female Mating face of a USB Type A Female VGA VIDEO 51 4 3 2 21 10 9
Resumen del contenido incluido en la página 14
MODEL NO: UNIMUX-USBV-2 SERIAL NO.: DATE: INSPECTED BY: 12
