Resumen del contenido incluido en la página 1
AV3,AVM3/AVT3,AVL3 VDE
NEW SUBMINIATURE
AV (FS•FS-T)
SWITCHES
WITH HIGH PRECISION
SWITCHES
FEATURES
• Consistent quality and high • 2 lever pivot positions available for
precision through sophisticated applications where low operating
automatic fabrication system —O.P.: force is required
8.4±0.3 mm (O.P.of conventional
subminiature switches: 8.4±0.5)
TYPICAL
• Flux-resistant construction with
integrally molded terminals
APPLICATIONS
• Solder terminal; Self-standing,
FS FS-T
• Communicat
Resumen del contenido incluido en la página 2
AV3,AVM3/AVT3,AVL3 ORDERING INFORMATION 1.FS switches Ex. AV 3 2 0 2 3 Type of Operating force by Lever International Version Terminals Actuators Contacts switch pin plunger, max. position standard AV3(FS) 3: Standard 1: Solder terminal with guard 0: Pin plunger 0: 0.25 N Nil: Standard Nil: AgNi alloy 3: UL/CSA/ switch 2: Solder terminal without guard 1: Short hinge (Gold-clad [11: forward] 61: Gold-clad VDE/ 3: Solder terminal with opposite lever contact only) triple layer*
Resumen del contenido incluido en la página 3
AV3,AVM3/AVT3,AVL3 APPLICABLE CURRENT RANGE Rating O.F. Type Contact 1mA 100mA 3A 5A 0.25 N 0.49 N 0.98 N 1.47 N Silver alloy contact Standard version Gold-clad triple layer contact type Silver alloy contact Long life version Gold-clad triple layer contact type Remark: For high capacity contact rating up to 10.1 A, please refer to PS (AVM3P) switches catalog. PRODUCT TYPES 1. FS switches (In-line terminal type) Standard type Part No. Operating force, Self-standing solder terminal Internationa
Resumen del contenido incluido en la página 4
AV3,AVM3/AVT3,AVL3 Part No. Operating force, Actuator Max. Right angle terminal Left angle terminal .110 Quick-connect 0.49N AV36023 AV37023 AV38023 Pin plunger 0.98N AV36043 AV37043 AV38043 0.20N AV36123 AV37123 AV38123 Short hinge lever 0.39N AV36143 AV37143 AV38143 0.16N AV36223 AV37223 AV38223 Hinge lever 0.34N AV36243 AV37243 AV38243 AgNi alloy contact type 0.12N AV36323 AV37323 AV38323 Long hinge lever 0.25N AV36343 AV37343 AV38343 0.16N AV36423 AV37423 AV38423 Simulated roller lever 0.3
Resumen del contenido incluido en la página 5
AV3,AVM3/AVT3,AVL3 2. FS-T switches (Cross-line terminal type) Standard type Part No. Operating force, Actuator Solder terminal without .110 Quick-connect Max. PC terminal guard terminal 0.49N AVT32023 AVT34023 AVT38023 Pin plunger 0.98N AVT32043 AVT34043 AVT38043 0.20N AVT32123 AVT34123 AVT38123 Short hinge lever 0.39N AVT32143 AVT34143 AVT38143 0.16N AVT32223 AVT34223 AVT38223 Hinge lever 0.34N AVT32243 AVT34243 AVT38243 AgNi alloy contact type 0.12N AVT32323 AVT34323 AVT38323 Long hinge le
Resumen del contenido incluido en la página 6
AV3,AVM3/AVT3,AVL3 3. FS switches (In-line terminal type) Long life version Part No. Operating force, Self-standing solder terminal Internationally Actuator Self-standing Max. common pitch With opposite PC terminal Without guard With guard PC terminal side guard Pin plunger 1.47N AVM32053 AVM31053 AVM33053 AVM34053 AVM35053 Short hinge lever 0.59N AVM32153 AVM31153 AVM33153 AVM34153 AVM35153 Hinge lever 0.54N AVM32253 AVM31253 AVM33253 AVM34253 AVM35253 AgNi alloy contact type Long hinge le
Resumen del contenido incluido en la página 7
AV3,AVM3/AVT3,AVL3 SPECIFICATIONS 1.Contact rating Standard version Long life version Gold-clad contact Gold-clad contact type type AgNi alloy contact type AgNi alloy contact type Voltage Triple layer Triple layer Resistive load Inductive load Resistive load Resistive load Inductive load Resistive load (cosφ]1) (cosφ]0.6-0.7) (cosφ]1) (cosφ]1) (cosφ]0.6-0.7) (cosφ]1) 125V AC 3A 2A 0.1A 5A 3A 0.1A 250V AC 3A 2A 0.1A 5A 3A 0.1A 30V DC 3A 2A 0.1A 5A 3A 0.1A 125V DC 0.4A 0.05A — 0.4A 0.05A — Remar
Resumen del contenido incluido en la página 8
AV3,AVM3/AVT3,AVL3 3) Hinge lever 4th digit number of O.F.max. R.F.min. P.T.max. M.D.max. O.T.max. O.P. Part No. 0 0.078N 0.003N Distance from mounting holes: 8.8±0.8mm 2 0.16N 0.015N Distance from stand-off: 2.8mm 0.8mm 1.2mm FS 12.2±0.9mm 4 0.34N 0.029N FS-T 12.1±0.9mm 5 0.54N 0.034N 4) Long hinge lever 4th digit number of O.F.max. R.F.min. P.T.max. M.D.max. O.T.max. O.P. Part No. 0— — Distance from mounting holes: 8.8±1.2mm 2 0.12N 0.012N Distance from stand-off: 3.5mm 1.0mm 1.6mm FS 12.2±1
Resumen del contenido incluido en la página 9
AV3,AVM3/AVT3,AVL3 mm General tolerance: ±0.25 1-(2) Solder terminal (with guard) NO C NC 8.0 24.0 Dimensions other than drawn above is same as guardless type. 1-(3) Solder terminal (with opposite side guard) 8.0 24.0 Dimensions other than drawn above is same as guardless type. 1-(4) Self-standing PC terminal PC board pattern Pin plunger ±0.3 ±0.05 3-1.2 dia. 7.6 4.0 ( ) P.T. 0.6 max. 1.8 ±0.1 8.7 ±0.1 15.4 ( ) O.P. 7.7 ±0.3 6.7 8.4 ( ) ±0.2 O.P. +0.1 1.85 2.4 ±0.4 -0.05 11.8 NO ±0.12 C NC ±0.15
Resumen del contenido incluido en la página 10
AV3,AVM3/AVT3,AVL3 mm General tolerance: ±0.25 Long hinge lever ( ) P.T. 4.0 3.5 max. ±0.4 13.1 Pretravel, Max. mm 3.5 ( ) Movement differential, Max. mm 1.0 O.P. ±1.2 8.8 ( ) O.P. ±1.3 Overtravel, Min. mm 1.6 12.2 NO Distance from mounting C NC 8.8±1.2 hole, mm Operating position Distance from standoff, 12.2±1.3 mm Simulated roller lever (P.T.) ±0.4 4.0 6.3 2.8 max. R2.5 Pretravel, Max. mm 2.8 Movement differential, Max. mm 0.8 (O.P.) ±0.8 11.65 ( ) O.P. Overtravel, Min. mm 1.2 ±0.9 15.05 Di
Resumen del contenido incluido en la página 11
AV3,AVM3/AVT3,AVL3 mm General tolerance: ±0.25 1-(7) Left angle terminal PC board pattern (P.T.) 4.0 0.6max. 3-1.5±0.05 dia. (O.P.) 8.4±0.3 7.62±0.1 7.62±0.1 2.4 5.08±0.2 3.4±0.15 6.4 R0.5 0.5 (2.8) (4.0) 7.62±0.1 7.62±0.1 19.8±0.3 1-(8) .110 Quick-connect terminal 4.0 NO C NC ±0.15 3.4 ±0.15 7.1 11.0 ±0.1 5.5 ±0.1 2.5 ±0.1 6-C0.6 ±0.1 ±0.1 2.8 0.5 ±0.05 9.5 3-1.2 dia. ±0.15 7.6 0 5.2 4.0 -0.15 ±0.15 15.2 ±0.2 6.4 ±0.3 19.8 Dimensions other than drawn above is same as self-standing PC board term
Resumen del contenido incluido en la página 12
1.8 dia. AV3,AVM3/AVT3,AVL3 mm General tolerance: ±0.25 Hinge lever ±0.4 (P.T.) 4.0 12.85 7.15 2.8 max. Pretravel, Max. mm 2.8 ( ) O.P. Movement differential, Max. mm 0.8 ±0.8 8.8 Overtravel, Min. mm 1.2 NO C NC Distance from mounting 8.8±0.8 hole, mm Operating position Distance from standoff, 12.1±0.9 mm Long hinge lever (P.T.) 3.5 max. ±0.4 4.0 13.1 Pretravel, Max. mm 3.5 ( ) O.P. ±1.2 Movement differential, Max. mm 1.0 8.8 Overtravel, Min. mm 1.6 NO C NC Distance from mounting 8.8±1.2 hol
Resumen del contenido incluido en la página 13
AV3,AVM3/AVT3,AVL3 mm General tolerance: ±0.25 2-(3) .110 Quick-connect terminal (P.T.) ±0.3 4.0 7.6 0.6 max. (O.P.) +0.1 ±0.3 2.4 7.7 -0.05 6.7 8.4 NO C NC 2.4 3.3 +0.1 2.4 -0.05 dia. 11.0 ±0.1 5.5 ±0.15 7.1 ±0.1 2.5 ±0.05 ±0.1 1.2 dia. 0.5 2.8 ±0.1 9.5 8.8 ±0.2 6.4 16.1 ±0.3 19.8 As for the dimensions of lever types, dimensions other than terminals are same as self-standing solder terminal. NOTES 1.Regarding fastening of switch body 2.Soldering operation 6.Cautions regarding use In fastening t
