Manual de instrucciones de ATEN Technology CS-1004

Manual de instrucciones del aparato ATEN Technology CS-1004

Aparato: ATEN Technology CS-1004
Categoría: Interruptor
Fabricante: ATEN Technology
Tamaño: 0.52 MB
Fecha de añadido: 3/5/2014
Número de páginas: 30
Imprimir el manual

Descargar

¿Cómo se utiliza?

Nuestro propósito es proporcionarte el acceso más rápido posible a los contenidos incluidos en los manuales de instrucciones del aparato ATEN Technology CS-1004. Utilizando la vista previa online, puedes ver rápidamente el índice de contenidos y pasar a la página donde encontrarás la solución a tu problema con ATEN Technology CS-1004.

Para tu comodidad

Si ver los manuales de instrucción de ATEN Technology CS-1004 directamente en esta página no es cómodo para ti, puedes utilizar dos soluciones posibles:

  • Vista en pantalla completa – Para ver cómodamente los manuales de instrucciones (sin descargarlos en tu ordenador) puedes utilizar el modo de vista en pantalla completa. Para activar la vista del manual ATEN Technology CS-1004 en pantalla completa, utiliza el botón Pantalla completa
  • Descargar al ordenador – también puedes descargar el manual de instrucciones de ATEN Technology CS-1004 a tu ordenador y guardarlo en tu colección. Sin embargo, si no quieres ocupar espacio en tu dispositivo, siempre podrás descargarlo de ManualsBase.
ATEN Technology CS-1004 Manual de instrucciones - Online PDF
Advertisement
« Page 1 of 30 »
Advertisement
Versión impresa

Muchas personas prefieren no leer el documento en la pantalla, sino en versión impresa. La opción de impresión también está prevista y puedes utilizarla haciendo clic en el enlace más arriba - Imprimir el manual. No tienes que imprimir el manual completo de ATEN Technology CS-1004, solo las páginas que elijas. Ahorra papel.

Resúmenes

A continuación encontrarás resúmenes de los contenidos incluidos en las páginas posteriores del manual de instrucciones para ATEN Technology CS-1004. Puedes utilizarlos si quieres ver rápidamente el contenido que se encuentra en la siguientes páginas del manual.

Resúmenes de contenidos
Resumen del contenido incluido en la página 1

 

   
2001-01-13

Resumen del contenido incluido en la página 2

2001-01-13

Resumen del contenido incluido en la página 3

 The complete Master View package consists of: One Master View Pro KVM Switch (CS-1004, CS-1008, or CS-1016)   One Power Adapter  One User Manual Check to make sure that the unit was not damaged in shipping. If you encounter a problem, contact your dealer. Read this manual thoroughly and follow the installation and operation procedures carefully to prevent any damage to the unit, and/or any of the devices connected to it. ©Copyright 2000 ATEN International Co., Ltd. Manual Part N

Resumen del contenido incluido en la página 4

 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Hardware Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 PC . . . . . . . . . . . . . .

Resumen del contenido incluido en la página 5

 The Master View Pro KVM Switch is a control unit that allows access to multiple computers from a single console (keyboard, monitor, and mouse). Before the development of the Master View, the only way to control multiple computer configurations from a single console was through a complex and costly network system. Now, with the Master View Pro, you can easily access multiple computers in a cost effective manner. Depending on the model, a Master View Pro can control up to 4, 8, or 16 PCs.

Resumen del contenido incluido en la página 6

   Daisy Chain Up To 31 Additional Units - Control Up to 512 PCs From a Single Console  No Software Required - Computer Selection via Front Panel Switches, Hotkeys or OSD (On Screen Display)  Quick View Scan Mode for Monitoring Selected PCs  PS/2 and Serial Mouse Emulation Provided For System Bootup  Console’s PS/2 Mouse Controls All Connected PCs - Even Those With Serial Mice  Support Microsoft Intellimouse Pro, Logitech FirstMouse, MouseMan. SVGA, VGA and Multisync Monitor Support

Resumen del contenido incluido en la página 7

   Console  A VGA, SVGA, or Multisync monitor capable of the highest resolution that you will be using on any computer in the installation. A PS/2 style mouse   A PS/2 style keyboard PC The following equipment must be installed on each computer: A VGA, SVGA or Multisync card.  Either a 6-pin mini-DIN (PS/2 style), or DB-9 (standard serial), mouse port.   Either a 6-pin mini-DIN (PS/2 style) keyboard port with +5V DC on pin 4 and Ground on pin 3, or a 5-pin DIN (AT style

Resumen del contenido incluido en la página 8

 CS-1016 Front View: * 12 4 3 T The figure shows a CS-1016 model. The only difference between it and the other models is in the number of Port Selection Switches. 1. Status LEDs OnLine: Lights ORANGE to indicate that the PC attached to the corresponding port is up and running Selected: Lights GREEN to indicate the currently selected port. 2. Power SwitchK/M Reset 3. Port Selection Switches  Press a switch to access the computer attached to the corresponding port.  If the keyboard and

Resumen del contenido incluido en la página 9

CS-1016 Rear View: * 1 2 3 45 6 7 T The figure shows a CS-1016 model. The only difference between it and the other models is in the number of Port Selection Switches. 1. Daisy Chain Section If you daisy chain units, the cables plug in here. 2. CPU Port Section The cables that link to the computers plug in here. 3. Power Jack The power adapter plugs in here. 4. DIP Switch SW 1 - 5: Sets the Station No. (see the table on page 23 for details) SW 6: Enables/Disables OSD Hot Key switching (On=Enabled

Resumen del contenido incluido en la página 10

   Before you begin, make sure that power to all the devices (Master View Pro and PCs) you will be connecting up have been turned off. First Stage Installation In a Single Stage installation, there are no additional Master View’s daisy chained down from the first unit. To set up a single stage installation do the following: 1. Set Switches 1 - 5 of the Master View Pro’s DIP Switch to the ON position to set this unit up as the First Station (see the table on page 26 for Dip Switch Stati

Resumen del contenido incluido en la página 11

6. Turn on the power to the Master View. Note: When you turn the unit On, it undergoes a Power On Self Test. If there is a problem, Port LEDs 1 - 4 flash repeatedly according to a pattern that indicates what the problem is: Pattern Indication LEDs 1 - 4 Flash Simultaneously Internal RAM Memory Error LEDs 1 - 4 Flash One After the Other External RAM Memory Error LEDs 1 + 2, and LEDs 3 + 4 Alternately Light and Go Off ROM Test Error If any of these problems occur, turn the Switch Off, then turn it

Resumen del contenido incluido en la página 12

4. Use Daisy chain cable set 2L-1700 (as described in the Hardware Requirements section), to connect from the Chain Out Port of the parent Master View unit to the Chain In Port of the child Master View unit (First Station Out to Second Station In, Second Station Out to Third Station In, etc.). Note: You cannot use the Chain In Port of the First Station Master View, since it is the highest level parent. 5. Plug the power adapter into an AC source; plug the power adapter cable into the Master View

Resumen del contenido incluido en la página 13

  Hot Plugging The Master View Pro supports hot plugging - components can be removed and added back into the installation by unplugging their cables from the CPU ports without the need to shut the unit down. In order for hot plugging to work properly, however, these procedures must be followed: Hot Plugging CPU Ports:  When hot plugging cables from the CPU ports: 1. The cable must be plugged back into the same port it was removed from. 2. After plugging the cable back in, you must perfo

Resumen del contenido incluido en la página 14

Port Selection Controlling all the PCs connected up in your Master View installation from a single console could not be easier. Three methods are available that provide instant access to any PC on the chain: Manual; Hot Key; and OSD.  Manual Simply press the appropriate Port Selection Switch on the Master View’s front panel. After you press the switch, the Selected LED lights to indicate that the port is currently selected. The OSD (see p.18) automatically switches to highlight the computer tha

Resumen del contenido incluido en la página 15

   Since each CPU Port on a Master View installation is assigned a unique Port ID, you can directly access any computer on any level of the installation using the Hot Key port selection method or from the OSD Main Menu by specifying the Port ID that the computer is connected to. The Port ID is made up of two parts: 1. The Station Number - a two digit number which reflects the Master View’s position in the daisy chain sequence, and 2. The Port Number - a one or two digit number whi

Resumen del contenido incluido en la página 16

Port Numbering Table Port Numbering is summarized in the following table: Number of Digits Meaning 4 First two for Station Number; second two for Port Number 3 First two for Station Number; third for Port Number 2 Port Number on the Currently Active Station 1 Port Number on the Currently Active Station 12 CS-1004 / CS-1008 / CS-1016 User Manual 2001-01-13

Resumen del contenido incluido en la página 17

    Hotkey Port Selection Hot key port selection allows you to conveniently access any computer directly form the keyboard, in stead of having to manually select it with a Port Selection switch. Note: Make sure that DIP Switch 6 (located on the Master View’s rear panel), is set to ON to enable the Hot Key feature under OSD. To select a port with the Hotkey method, do the following: 1. Press the left and right Ctrl Keys [Ctrl+Ctrl] and release both of them at the same time. Note: In

Resumen del contenido incluido en la página 18

Hot Key Broadcasting Commands to all attached PCs (to install software or shut down all the PCs, e.g.), can be broadcast from the console’s keyboard with the following Hot Key combinations: [Ctrl] + [Alt] + [1] + [Enter] (to initiate the keyboard broadcast)  A Broadcast symbol appears in front of the Station ID (if the Port ID is currently displayed on the screen), to indicate that Broadcasting is in effect. [Ctrl] + [Alt] + [2] + [Enter] (to end the keyboard broadcast)  When keying in the com

Resumen del contenido incluido en la página 19

!  On Screen Display (OSD), provides a menu driven interface to handle the computer switching procedure. Using OSD is a great deal more convenient - especially in large, daisy chained installations where it is difficult to keep track of which port a particular computer is attached to. All operations start from the OSD Main Menu. To pop up the Main Menu, tap either Ctrl key twice. When you invoke the OSD, a screen similar to the one below appears: OSD always starts in List view, with t

Resumen del contenido incluido en la página 20

OSD Main Menu Headings Heading Explanation This column lists the Port ID numbers (Station Number - Port Number) for SN-PN all the CPU ports on the installation. The simplest method to access a particular computer is move the Highlight Bar to it, then press [Enter]. If a port has been selected for Quick View scanning (see F2 and F4, QV below), an arrowhead displays in this column to indicate so. PC Lists all the computers that are Powered On and are On Line. If a port has been given a name (see F


Manuales de instrucciones similares
# Manual de instrucciones Categoría Descargar
1 ATEN Technology ACS1208 Manual de instrucciones Interruptor 13
2 ATEN Technology ACS-1602 Manual de instrucciones Interruptor 1
3 ATEN Technology AF-241 Manual de instrucciones Interruptor 7
4 ATEN Technology ALTUSEN Hideaway KL9116 Manual de instrucciones Interruptor 27
5 ATEN Technology ACS1216A Manual de instrucciones Interruptor 12
6 ATEN Technology ACS-1208L Manual de instrucciones Interruptor 2
7 ATEN Technology ACS-1714 Manual de instrucciones Interruptor 11
8 ATEN Technology ALTUSCN KH1516I Manual de instrucciones Interruptor 28
9 ATEN Technology ALTUSEN KH1508 Manual de instrucciones Interruptor 10
10 ATEN Technology AS-811P Manual de instrucciones Interruptor 1
11 ATEN Technology ALTUSEN KH2516 Manual de instrucciones Interruptor 2
12 ATEN Technology AS-402PII Manual de instrucciones Interruptor 0
13 ATEN Technology ALTUSEN KM0832 Manual de instrucciones Interruptor 0
14 ATEN Technology AS-8144B Manual de instrucciones Interruptor 1
15 ATEN Technology AS-411S Manual de instrucciones Interruptor 6
16 Sony 4-296-436-11 (2) Manual de instrucciones Interruptor 0
17 3Com 10/100BASE-TX Manual de instrucciones Interruptor 61
18 3Com 2226-SFP Manual de instrucciones Interruptor 688
19 3Com 16985ua.bk Manual de instrucciones Interruptor 10
20 3Com 10BASE-T Manual de instrucciones Interruptor 4