Resumen del contenido incluido en la página 1
GigWorks™
MKII-16 Switch
Model MKII-BASE16
Installer’s/User’s Manual
Publication No. 59003-01 Rev. A
Resumen del contenido incluido en la página 2
Ancor Communications Incorporated 6130 Blue Circle Drive Minnetonka, MN 55343 (612) 932-4000 Release Number 01, Revision A ( December, 1998) This release obsoletes all previous releases. The following paragraph does not apply to the United Kingdom or any country where such provisions are inconsistent with local law: THIS PUBLICATION is printed “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
Resumen del contenido incluido en la página 3
Table Of Contents Preface 1 How to Use This Manual 1 Intended Audience 2 Related Materials 2 Ancor Customer Service 3 Safety Notices 3 Communications Statements 6 Laser Safety Information 9 Accessible Parts 1. GigWorks™ MKII-16 Switch Model MKII-BASE16, General Description 1-1 GigWorks™ MKII-16 Switch Model MKII BASE16 General Description 1-1 Major Fibre Channel Port Features 1-2 Major Switch Management Features 1-4 Major Switch Chassis Features 1-5 Fibre Channel Ports 1-8 Front Panel Controls 1
Resumen del contenido incluido en la página 4
Table Of Contents 3. Switch Management 3-1 Introduction 3-1 GigWorks MKII Switch Utilities 3-3 Trivial File Transfer Protocol (TFTP) 3-3 Simple Network Management Protocol (SNMP) 3-4 Ethernet Cabling 3-5 Configuring the Switch Ethernet Port 3-5 Configuring the Ethernet Port Using the Switch Utilities 3-6 Configuring the Ethernet Port Using TFTP 3-7 Managing the Switch Using the GigWorks MKII Switch Utilities 3-7 Loading the Switch Utilities 3-7 Getting Started 3-8 Using the Switch Utilities 3-8
Resumen del contenido incluido en la página 5
Table Of Contents 3-54 Community Types 3-55 Operation Types 3-56 Management Information Bases (MIBs) 3-57 Configuring SNMP 4. Diagnostics/Troubleshooting 4-1 Introduction 4-1 Power Supply Troubleshooting 4-5 Power-On-Self-Test (POST) 4-5 Overview 4-7 Heartbeat LED Blink Patterns 4-7 Normal (all pass) 4-7 Failure Blink Patterns 4-7 Test/Failure Descriptions 4-12 Continuous Test 4-12 Overview 4-13 Procedure 4-15 Fiber Continuity Tests 5. Removal/Replacement Procedures 5-1 Introduction 5-1 Input Fu
Resumen del contenido incluido en la página 6
Table Of Contents Appendix C: Chassis Switch Panel C-1 Chassis Switch Panel C-2 Reset C-2 Force Prom Mode C-2 Watch Dog Timer Disable C-3 Test Mode C-4 Chassis#, Fabric#, Stage#, and Area# Configuration Switches List Of Figures 1-1 Figure 1-1 GigWorks MKII-16 Switch Model MKII-BASE16 1-6 Figure 1-2 Chassis Front 1-7 Figure 1-3 Typical GBIC 1-10 Figure 1-4 Chassis Back 2-2 Figure 2-1 GigWorks MKII-16 Switch Model MKII-BASE16 Chassis Components 2-3 Figure 2-2 Cabinet Mounting Bracket 2-11 Figure 2
Resumen del contenido incluido en la página 7
Preface How to Use This Manual This manual has five sections and three appendixes: • Section 1 is an overview of the GigWorks™ MKII-16 Switch Model MKII- BASE16. It describes indicator lights and all user controls and connections. • Section 2 explains how to install the Switch. • Section 3 contains Switch Management information. • Section 4 contains troubleshooting procedures, explains the Power On Self Test (POST), and Continuous Test. • Section 5 contains removal/replacement procedures for al
Resumen del contenido incluido en la página 8
Preface Related Materials The following manuals and materials are referenced in the text and/or provide additional information. • The following Fibre Channel Standards: Fibre Channel Physical and Signaling Interface (FC-PH) ANSI X3.230- 1994. Arbitrated Loop (FC-AL) ANSI X3.272-1996. The Fibre Channel Standards are available from: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112-5776 Phone: (800) 854-7179 or (303) 397-7956 Fax: (303) 397-2740 Ancor Customer Service P
Resumen del contenido incluido en la página 9
Communications Statements Safety Notices A Danger notice indicates the presence of a hazard that has the potential of causing death or serious personal injury. Danger notices appear on the following pages: 2-5, 2-6, and 5-6 A Warning notice indicates the presence of a hazard that has the potential of causing moderate or minor personal injury. There are no Warning notices in this manual. A Caution notice indicates the presence of a hazard that has the potential of causing damage to the equipment.
Resumen del contenido incluido en la página 10
Communications Statements radioélectriques por les appareils numériques, telles que prescrites par le Réglement sur le brouillage radioélectrique établi par le ministère des Communications du Canada. L'exploitation faite en milieu résidentiel peut entraîner le brouillage des réceptions radio et télé, ce qui obligerait le propriétaire ou l'opérateur à prendre les dispositions nécwssaires pour en éliminer les causes. CE Statement The CE symbol on the equipment indicates that this system complies
Resumen del contenido incluido en la página 11
Communications Statements VCCI Class A Statement Translation: This is a Class A product based on the standard of the Voluntary Control Council For Interference by Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may arise. When such trouble occurs, the user may be required to take corrective actions. GigWorks MKII-16 Switch Model MKII-BASE16 Installer's/User's Manual 59003-01 Rev. A Table Of Contents 5
Resumen del contenido incluido en la página 12
Laser Safety Information Laser Safety Information The GigWorks 1062/16 MKII Switch may use Class 1 lasers to communicate over the fiber optic conductors. The U.S. Department of Health and Human Services (DHHS) does not consider Class 1 lasers to be hazardous. The International Electrotechnical Commission (IEC) requires labeling information that states that the lasers are Class 1. The following notices are given so you understand the laser’s certification and classification, the laser type and th
Resumen del contenido incluido en la página 13
Laser Safety Information Optical GBICs Each optical GBIC is a single communications port. Each communications port consists of a transmitter and receiver optical subassembly. The transmitter subassembly contains internally a semiconductor laser diode of either: 1) the gallium aluminum arsenide (GaAlAs) type emitting in the wavelength range of 770 to 860 nanometers (commonly referred to as Shortwave (SW)) or 2) indium gallium arsenide phosphide (InGaAsP) type emitting in the wavelength range
Resumen del contenido incluido en la página 14
Laser Safety Information Labeling Requirements There are no caution or danger labels required for use of the optical GBIC since it is a Class 1 laser component assembly. Within the U.S., the only laser safety label required is the certification label that already appears on the plastic retainer of the optical GBIC assembly. Outside of the U.S., the IEC 825 laser safety standard requires that the system level product have a Class 1 information label permanently attached and clearly visible whenev
Resumen del contenido incluido en la página 15
Accessible Parts Accessible Parts The only Field Replaceable Units (FRUs) in the GigWorks MKII-16 Switch Model MKII-BASE16 are: • fuses associated with the AC power input, • power supply(s), and • interfaces to the interconnection media called GBICs. Other than these FRUs, there are no accessible parts in the Switch chassis. Removal of the top of the Switch chassis will void the warranty. Refer to Section 4 (Removal Replacement Procedures) for more information. Pièces Accessibles Les pièces
Resumen del contenido incluido en la página 16
GigWorks MKII-16 Switch Model MKII-BASE16 59003-01 Rev. A Installer's/User's Manual 10 Table Of Contents
Resumen del contenido incluido en la página 17
COMMUNICATIONS, INC. Section 1 GigWorks™ MKII-16 Switch Model MKII-BASE16 General Description GigWorks™ MKII-16 Switch Model MKII-BASE16 General Description The Switch is the Fabric component of a Fibre Channel compliant network. Figure 1-1 is an illustration of the Switch. Figure 1-1 GigWorks MKII-16 Switch The Switch uses a two-dimensional switching architecture consisting of space- division and time-division interconnection techniques to implement the Fibre Channel (FC) fabric. Space-div
Resumen del contenido incluido en la página 18
General Description • All ports used as F_Ports support Class 1, Class 2, Class 3, and Intermix Fibre Channel service. Refer to the Reference Information appendix for more information. • All ports support the maximum Fibre Channel frame size (2148 bytes) for all classes of Fibre Channel service. • All ports used as FL_Ports support Class 2, and Class 3 Fibre Channel service. Refer to the Reference Information appendix for more information. • As an option, any or all ports can be Trunk Ports (T_P
Resumen del contenido incluido en la página 19
General Description information about the Web-based Switch management application. Switch management allows you to: • Set up the connection between the Ethernet port on a PC and the Ethernet port on the Switch and track the communication that takes place over this connection • Configure the Switch Management interface with its IP network configuration parameters and SNMP configuration parameters • Configure the Fabric Number of the chassis and Chassis Number • Configure the Chassis Stage Type
Resumen del contenido incluido en la página 20
General Description of these Broadcast Zones. A port will broadcast to all ports in the same Broadcast Zone (or zones) in-which the port is defined. If Hard Zones are enabled, Broadcast Zones may not cross the defined Hard Zone boundaries. • Name Server Zones allow the division of the fabric into as many as 16 zones that define which ports receive Name Server information. A particular port may be defined in one or more of these Broadcast Zones. A port will receive Name Server information for al
