Resumen del contenido incluido en la página 1
10-in-1 Remote Control
KH 2159
10-in-1 Remote Control
Operating manual
Univerzálny diaľkový ovládač
Návod na používanie
Univerzalni daljinski upravljač
Upute za uporabu
KOMPERNASS GMBH
BURGSTRASSE 21 ⋅ D-44867 BOCHUM
www.kompernass.com
ID-Nr.: KH2159-06/10-V1
CV_KH 2159 - DT-53628.indd 9 30.06.2010 13:04:10
Resumen del contenido incluido en la página 2
KH 2159
Resumen del contenido incluido en la página 3
INDEX PAGE Important safety instructions 2 Device summary 3 Initial use 4 Unpacking the device/checking the package contents 4 Inserting the batteries 4 Operating components 5 LCD display 5 Buttons 6 SETUP - System settings 9 Code Setup (Programming the remote control) 11 Programming by brand code search 11 Programming by manual code input 12 Programming by automatic code search 12 System-Setup 14 Setting the time 14 Setting the date 14 Adjust contrast 15 Background Illumination 15 Setting t
Resumen del contenido incluido en la página 4
UNIVERSAL REMOTE CONTROL KH2159 This documentation is copyright protected. All rights includ- ing those of photographic reproduction, duplication and distribution by means of particular methods (for example data processing, data carriers and data networks), wholly or partially as well as substantive and technical changes are reserved. Read the operating instructions carefully before using the de- vice for the first time and preserve this booklet for later refer- ence. Pass this manual on to
Resumen del contenido incluido en la página 5
• Explosion hazard! Non-rechargeable batteries must never be recharged. • Do not open the batteries or short-circuit them. • Battery acid leaking from a battery can cause inflamma- tion of the skin. In event of contact with the skin, rinse with large amounts of water. If the liquid comes into contact with your eyes, rinse thoroughly with water, do not rub and immediately consult a doctor. Attention! The Universal remote control contains an infrared diode of laser class 1. In order to avoi
Resumen del contenido incluido en la página 6
Tips: • The functions described here pertain to the theoretically ideal circumstance that the button structure of the respec- tive original remote control is identical to this universal remote control. This only occurs, however, in rare cases. If, therefore, not all of the original remote control's functions can be reproduced it is not due to a dificiency in the Uni- versal remote control. • All the brand names used in these instructions or in the accompanying code list are trademarks of
Resumen del contenido incluido en la página 7
1. Open the battery compartment cover 2! in the direction of the arrow. 2. Insert the batteries as shown in the diagram and close the battery compartment. The LCD display q is activated as long as batteries are installed. The following diagram shows the LCD display q after the batteries have been installed or changed. Note: If no LCD display q is visible check the polarity of the batteries or install new ones. Operating components LCD display The LCD display q is divided into fi
Resumen del contenido incluido en la página 8
MON = Monday Tue = Tuesday WED = Wednesday THU = Thursday FRI = Friday SAT = Saturday SUN = Sunday Standard display: The standard readout of the LCD display q consists of the details for the relevent device, for example, "TV", the initial for the day of the week and the time of day indicator. Buttons Note: All the functions described here can, of course, only be used if they are supported by the device being controlled. /ALL OFF button. w Switch device on/off. hold down for approx.
Resumen del contenido incluido en la página 9
"S" button r H old down for 3 seconds to access the SETUP menu, press briefly to superimpose the date and/or to open access to addi- tional functions such as EPG or PIP. Arrow buttons t Mo ve up, right, left and down in menus. EXIT button y Move a level backward in the menu. P +/— buttons u Change the reception channel. MACRO button i MACRO button i followed by a number button o 1-6 activates a previously saved chain of commands. Number buttons o Enter programme and device code
Resumen del contenido incluido en la página 10
Note: • The teletext function is only available in the European TV mode and your TV device must have a teletext module. • In addition the P +/- buttons u control the following teletext functions: P + Leaf one page forward P — Leaf one page backwards Record/playback buttons f The playback buttons f control devices such as DVD/CD players and video recorders: Start playback ASPECT Image format switching with TV operation. Record Stop Playback/Record/Wind Pause playback Rewind Wind forw
Resumen del contenido incluido en la página 11
SETUP - System settings In the system settings you undertake the following: • Programming the remote control to the devices to be con- trolled • Setting the time of day, date, display contrast, background illumination, volume, lock function as well as system reset. • Timer settings • The "learning" of designated button commands • Setting up Macros • Assigning favourites On the following page you can see a summary of the menu structure. - 9 - BDA_KH 2159 - DT-53628_en.indd 9 08.07.2010 18
Resumen del contenido incluido en la página 12
- 10 - BDA_KH 2159 - DT-53628_en.indd 10 08.07.2010 18:06:19
Resumen del contenido incluido en la página 13
Code Setup (Programming the remote control) 3 Programming methods are available for the remote control: Programming by brand code search, by automatic code search and by direct code input (manual). First you should use the brand code search since this method is the fastest way of programming if the manufacturer of your de- vice is itemized in the code list. As second is recommended the direct code input followed by the automatic code search. Programming by brand code search With this method
Resumen del contenido incluido en la página 14
9. If most of the buttons function press the OK button l to save the setting. In the LCD display q "OK" appears. Subsequently the menu will close automatically. 10. If, however, none or only a few of the buttons function select with the or button t the next code and test again as described in step 8. 11. With the EXIT button y you will move one level upwards in the menu. Repeat these operational steps for all devices that you would like to control with the remote control. Programming b
Resumen del contenido incluido en la página 15
1. Press the device button e for the device that is to be con- trolled (i.e. VCR). 2. Switch the device that is to be controlled with the remote control on. With VCR/DVD/CD devices please insert a tape and/or disc. 3. Hold down the S button r for a little longer than 3 sec- onds. 4. In the LCD display q "CODE SETUP" appears. Press the OK button l. "ENTER CODE" now appears in the LCD display q. Press the or button t until "SEARCH CODE" is shown in the LCD display q. Point the remote con
Resumen del contenido incluido en la página 16
System-Setup Setting the time The LCD display q shows you the time of day. You set this as follows: 1. Hold down the S button r for a little longer than 3 seconds. The notice "CODE SETUP" appears. If appox. 15 seconds passes without an entry the device exits the menu and returns to the standard display. 2. With the or button t select "SYSTEM SETUP" and confirm with the OK button l. 3. In the LCD display q "TIME SETUP" appears. Confirm with the OK button l. The LCD display q now shows
Resumen del contenido incluido en la página 17
Adjust contrast You can set the display's contrast as follows: 1. Hold down the S button r for a little longer than 3 sec- onds. The notice "CODE SETUP" appears. 2. With the or button t select "SYSTEM SETUP" and confirm with the OK button l. 3. With the or button t select "CONTRAST SETUP" and confirm with the OK button l. 4. In the LCD display q the contrast value now blinks which you can set with the or button t. Display readout: 0 = highest contrast: 15 = lowest contrast 5.
Resumen del contenido incluido en la página 18
6. If the specified device is equipped with a volume control, “SUCCESS” will be displayed briefly and the menu will close. From now on the volume control functions on the device just specified. 7. If this device is not equipped with its own volume control the URC will not allow this selection and shows “VOLUME ERROR”. Even then the menu will close. The volume con- trol will then continue to function on the former device. You can also deactivate the global volume control for specific device
Resumen del contenido incluido en la página 19
System reset Via this function you can reset the URC to its factory default settings. Thereby all settings made by you will be deleted. 1. Hold down the S button r for a little longer than 3 sec- onds. The notice "CODE SETUP" appears. 2. With the or button t select "SYSTEM SETUP" and confirm with the OK button l. 3. With the or button t select "SYSTEM RESET" and confirm with the OK button l. 4. In the LCD display q now appears "CONFIRM RESET". Confirm the reset with the OK button l.
Resumen del contenido incluido en la página 20
3. Now the hour of the time of day, to which the desired button combinations are to be carried out, blinks. Set with the or button t the desired hour and press for con- firmation the OK button l. 4. Now the minutes of the time of day, to which the desired button combinations are to be carried out, blinks. Set with the or button t the desired minutes and press for confirmation the OK button l. 5. In the LCD display q you will see "TIMER X KEY" (X stands for the desired timer). Now p
