Resumen del contenido incluido en la página 4
Read all instructions in this guide before assembling or using your vacuum cleaner. WARNING: Your safety is important to us. To reduce the risk of fire, electrical shock, injury to persons or damage when using your vacuum cleaner, follow basic safety precautions including the following: Use your vacuum cleaner only as Keep hair, loose clothing, fingers, and all described in this guide. Use only with parts of body away from openings and Sears recommended attachments. moving parts. Disconnect elec
Resumen del contenido incluido en la página 5
It is important to know your vacuum cleaner's parts and features to assure its proper and safe use. Review these before using your vacuum cleaner. Part Name StyIeNo. Part No. in USA HEPAMedia ExhaustFilter EF-5 20-81102 Primary Filter EF-6 20-81100 Belt UB-13 20-53023 ON/OFF _Retainer Pet Handi Mate TM Dust Bin Release Power Cord Cord Retainer- Upper Cord Dust Extension Wand Release Exhaust Button Filter Dusting Brush Extension Hose (Extension Wand revice inside) _ Tool Guard __ Lower Nozzle Mod
Resumen del contenido incluido en la página 6
Please payspecial attention to these hazard alert boxes, and follow any _ instructions given. WARNING statements alert you to such hazards as fire, electric shock, burns and personal injury. CAUTION statements alert you to such hazards as personal injury and/or property damage. Before assembling the vacuum cleaner, check the PACKING LIST on page 2. Use _WARNING this list to verify that you have received °It the components of your new Kenmore Electrical Shock Hazard vacuum cleaner. DO NOT plug in
Resumen del contenido incluido en la página 7
EXTENSION HOSE ASSEMBLY 1. While aligning tabs on extension hose 2. Rotate extension hose assembly as assembly to corresponding slots in lower shown until it locks into place. hose port, insert extension hose assembly into lower hose port, Extension _" Hose \_ Assemb@y_ 3. Push extension hose handle into Tab _ extension hose holding bracket. Hose Port POWER CORD 1. Make sure that the upper cord hook is rotated in the upright position as shown. 2. Wrap power cord loosely around cord hooks. 3. Loc
Resumen del contenido incluido en la página 8
CAUTION Moving parts! To reduce the risk of personal injury, DO NOT touch the agitator when vacuum cleaner is on. Contacting the agitator while it is rotating can cut, bruise or cause other injuries. Always turn off and unplug from e_ectrlcal outlet before servicing. Use caution when operating near children. POWER CORD 1. Turn the quick release upper cord hook 3. Be sure the power to either side and down to release the cord is locked into the cord retainer. power cord. 4. Plug the polarized powe
Resumen del contenido incluido en la página 9
PiLE HEIGHT SELECTION AND SETTINGS SUGGESTED PILE HEIGHT SETTINGS: To setect o pile height setting: Select a pile height setting by turning the There are five (5) pile height settings on HEIGHT ADJUST knob located on the the vacuum cleaner. You may need to nozzle, raise the height to make some jobs easier, such as scatter rugs and some deep pile Attention: Refer to your carpet carpets, and to prevent the vacuum manufacturer's cleaning cleaner from shutting off. recommendations, Some more delicat
Resumen del contenido incluido en la página 10
ON/OFF BUTTON To turn vacuum cleaner on or off, press the ON//OFF button. CAUTION Do not allow vacuum cleaner to remain in one spot for any length of time when the agitator is turning. Damage to carpet may occur. DUAL MOTOR PROTECTION SYSTEM Thermal Protector = Motor Motor Protector = By=Pass Valve This vacuum cleaner has a motor This vacuum protector Thermal valve which prevents cleaner also motor overheating and damage. If a Motor has a motor Protector clog prevents the normal flow of air to p
Resumen del contenido incluido en la página 11
Carpet edges Guide either side of the nozzle along the walt. _WARNING Personal Injury Hazard Use care if vacuum cleaner is placed on stairs, tf it fails, personal injury or properly damage could result. Cleaning FLOOR/TOOLS SELECTOR VALVE -TOOLS POSITION When using attachmentsn verify that the Floor/Tools Selector Valve is in the Tools position as shown in figure 2. (Figure 2) ATTACHMENT USE TABLE CLEANING AREA Between ATTACHMENT Furniture _ Stairs Cushions _ Drapes_ I/ I/ CREVICE TOOL J I/ DUST
Resumen del contenido incluido en la página 12
i HOW TO USE HOSE AND EXTENSION WAND ] 1. Turn floor/tools The dusting brush, crevice tool and Pet selector knob to the Handi Mate TM can be attached directly to the extension wand. TOOLS position when using tools. Extension Dusting Return selector Brush _ r- Pet Handi knob to FLOOR Wand /_/ MoteT. position when not using attachments. See figure 1 page 9. Wand Crevice Extension 2. This vacuum cleaner is equipped with a built-in extension wand. It is located _-- Extension inside the extension hos
Resumen del contenido incluido en la página 13
ATTACHMENT STORAGE 1. Press button and slide extension wand Attachments should be returned to their back into the extension hose. appropriate locations on the vacuum cleaner. Extension Wand - \ 2 Pet Handi "h- Mote TM Extension Wand Dusting_ Brush Extension Hose _revice Extension Tool 2. Slide extension hose handle down and Floor/Tools into extension S hose holding Valve bracket. 3. Turn Floor/Tools Selector knob to the FLOOR position. See figure 2 page 11. PET HANDI MATE TM U Insert extension a
Resumen del contenido incluido en la página 14
NOTE: Always follow all safety precautions when performing maintenance to the vacuum cleaner. [ VACUUN_ CLEAN ER STORAGF i Place the handle in the upright position. Unplug the cord from the wall. Gather the cord and wrap it loosely around the upper and lower cord hooks. Lock power cord plug onto the power cord. Store the vacuum cleaner in a dry, indoor area, on the floor with the handle locked in Upper the upright position. Hook Cord WARNING Elecfrlcal Shock And Personal injury Hazard Wrapping
Resumen del contenido incluido en la página 15
CLOG REMOVAL 1. Remove dust 2. Cleon and remove any lint or debris /-Dust Bin bin. (See DUST from: Release BIN EMPTYING Burton page 17.) A. Upper suction port B. Lower suction port C. Nozzle suction port D. Selector valve port (on rear) See page 16 for details. A) Upper suction port Lower suction port C) NozzSe suction port D) Selector vaSve port (on rear) -15-
Resumen del contenido incluido en la página 16
CLOG REMOVAL WARNING Electrical Shock And Personal Injury Hazard Disconnect electrical supply before performing maintenance to the vacuum cleaner. Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting. CLOG REMOVAL FLOOR/TOOLS 4. Remove Lower j,f_F__f_----_ SELECTOR VALVE Hose from Selector Valve by squeezing Hose in 1. Remove area shown and valve selector moving side to side cover ring by while pulling. squeezing two (2) release NOTE: Hose is
Resumen del contenido incluido en la página 17
DUST BIN EMPTYING 3. The door will swing WARNING open and the debris will fall into the trash Always unplug power cord from container. electrical outlet before performing any service on vacuum cleaner. 4. Shake the dust bin to release any debris that might hang inside the TO REMOVE DUST BiN dust bin. 1. Grasp the handle on the top of the dust bin. Press the dust bin release 5. After the dust bin button. is empty of debris, firmly close the 2. Lift up and out door. Make sure you to remove dust he
Resumen del contenido incluido en la página 18
FILTER iDENTiFiCATiON This vacuum cleaner has 3 filters that will need to be cleaned and/or replaced on a regular basis. _18_
Resumen del contenido incluido en la página 19
PRIMARY FILTER CLEANING it is recommended to clean filter with 6. Remove primary filter from frame. cold water at least every three (3) months. Check the primary filter frequently and clean when dirty. 1. Turn off and unplug vacuum cleaner. 2. Remove the dust bin. Refer to DUST BIN EMPTYING page 17. Fiffer 3. On the dust /-Dust Bin bin handle, Release push the Button release Z Wash primary (foam) filter with cold button, water only, DO NOT use detergent or soap. Repeat 10 times or until water ru
Resumen del contenido incluido en la página 20
PRE-FILTER CLEANING The pre-filter is located inside the dust 7. Rinse with cold water only, DO NOT bin. Check the pre-filter frequently and use detergent or soap. Allow parts to dry clean when dirty. 24 hours before putting back into vacuum cleaner. NOTE: If necessary, the pre-filter can be removed to be cleaned with water. DO NOT wash pre=filter in the dishwasher. 1. Remove the dust bin as outlined in the DO NOT install parts damp. DUST BIN EMPTYING section. Refer to page 17. TO REPLACE PRE-FI
