Resumen del contenido incluido en la página 1
T
V
–
M
E
N
U
A
+
T
/
V
B
G
P
O
R
CONTENTS
SAFETY FIRST 2
VIDEO CASSETTE RECORDER
Safety Precautions............................. 2
Some Do's And Don'ts ..................... 4
QUICK SET UP GUIDE 5
CHECK THE CONTENTS .................. 5
INSTALLATION ................................ 6
HR-S9500EK
AUTO SET UP .................................. 8
BASIC OPERATIONS 10
Playback ......................................... 10
Recording ....................................... 12
Video Plus+ Timer Programmi
Resumen del contenido incluido en la página 2
SAFETY FIRST 2 Safety Precautions The rating plate and the safety caution are on the rear of the unit. WARNING: DANGEROUS VOLTAGE INSIDE WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. IMPORTANT n Please read the various precautions on p. 2 – 4 of this instruction manual before installing or operating the recorder. n It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright i
Resumen del contenido incluido en la página 3
3 CAUTION n When you are not using the recorder for a long period of time, it is recommended that you disconnect the power cord from the mains outlet. n Dangerous voltage inside. Refer internal servicing to qualified service personnel. To prevent electric shock or fire hazard, remove the power cord from the mains outlet prior to connecting or disconnecting any signal lead or aerial. The STANDBY/ON button does not completely shut off mains power from the unit, but switches operating current on a
Resumen del contenido incluido en la página 4
SAFETY FIRST (cont.) 4 Some Do's And Don'ts On The Safe Use Of Equipment This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. DO read the operating instructions before you attempt to use the equipment. DO ensure that all electrical connections (including the mains plug, extension leads and interconnec- tions between pieces of equipment) are
Resumen del contenido incluido en la página 5
T V – M E N U A + T / B V G P O R QUICK SET UP GUIDE 5 Dear Customer, Thank you for purchasing this JVC Video Cassette Recorder. Please use this QUICK SET UP GUIDE to help you to set up your video cassette recorder. CHECK THE CONTENTS 1 CHECK ALL THE CONTENTS SHOWN BELOW Video Cassette Recorder VCR TV SAT AUDIO DIGITAL REC LINK TBC/NR ENTER/ TV/VCR ENTREE – –:– – STANDBY/ON TV PROG S-VIDEO VIDEO (MONO)L – AUDIO – R SPATIALIZER 123 INSERT A.DUB 2 PUSH-OPEN 45 6 VPS/PDC DAILY/QTDN. WEEKLY/HEBDO 7
Resumen del contenido incluido en la página 6
QUICK SET UP GUIDE (cont.) 6 INSTALLATION 2 CONNECT VIDEO RECORDER TO TV Place the recorder on a stable, flat surface. Back of TV RF Cable (provided) 21-pin SCART Cable (not provided) Make this TV Aerial Cable connection if (not provided) your TV has a 21-pin AV input Aerial connector connector (SCART) in order to reduce the possibility of interference. 21-pin AV input connector And if you are using a stereo (SCART) TV, you will need this cable in order to enjoy stereo playback of videotapes. Ma
Resumen del contenido incluido en la página 7
7 Back of TV AUDIO IN connectors S-VIDEO IN connector S-Video cable (provided) Audio cable Aerial connector (not provided) Mains outlet Mains Power Cord ANT. IN AV1 OUT AV1 IN/OUT R L S OUT AUDIO OUT COMP. Y/C JLIP RF OUT AV2 IN PAUSE/ R.A. EDIT Back of Recorder RF Cable (provided) S-VIDEO CONNECTION NOTES: To connect to a TV with S-VIDEO/AUDIO IN connectors . . . c You can obtain high-quality S-VHS pictures. 1– Connect the aerial, recorder and TV as per "RF CONNEC- c If your television is not s
Resumen del contenido incluido en la página 8
QUICK SET UP GUIDE (cont.) 8 AUTO SET UP 3 SET THE TUNER CHANNELS, CLOCK, GUIDE PROGRAM NUMBERS AND VIDEO CHANNEL* The Auto Set Up function sets the tuner channels, clock, Video Plus+ assigned Guide Program numbers and the video channel* automatically the first time the button on the recorder or on the remote is pressed to turn on the recorder after the mains power cord has been plugged into a mains outlet. * Useful if you have connected the video recorder to Before performing the following pro
Resumen del contenido incluido en la página 9
9 Auto Set Up results appear on the display panel When both auto channel set and auto clock set have been completed successfully the A correct current time will be displayed after the OK button is pressed in item 3 on page 8. When auto channel set has been completed successfully but auto clock set has not, "(PR)1" B will be displayed after the OK button is pressed in item 3 on page 8. When neither auto channel set nor auto clock set has been completed successfully, "– –:– –" C will be displa
Resumen del contenido incluido en la página 10
PLAY BASIC OPERATIONS 10 The easiest, most basic operation possible with your video recorder is tape playback. Already-recorded signals on a video tape are read by your video recorder and displayed on your TV just like a TV programme. Playback LOAD A CASSETTE Turn on the TV and select the VIDEO channel (or AV mode). Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is 1 point toward the recorder. Don’t apply too much pressure when inser
Resumen del contenido incluido en la página 11
h d % % Þ % r c a r w a r e o s F y a l P n o w i t o l o S m 11 NOTES: Slow Motion c Refer to the SHUTTLE ring illustration below as you read the following procedures. ACTIVATE SLOW-MOTION c To use the remote control's JOG dial or SHUTTLE ring, press JOG/SHUTTLE first so that the button lights. Pressing the PLAYBACK button again turns off the light. During playback or still picture, turn the SHUTTLE ring Still to the right for forward slow motion, or to the left for 1 reverse slow motion (refe
Resumen del contenido incluido en la página 12
PAUSE BASIC OPERATIONS (cont.) 12 TV signals being received by the recorder’s built-in tuner can be recorded onto a video tape. You can “capture” a TV programme using your video recorder. Recording LOAD A CASSETTE Insert a cassette with the record safety tab intact (See Turn on the TV and select the VIDEO channel (or AV mode). below). 1 c The counter is reset to 0:00:00 and the recorder 5 power comes on automatically. 6 CHOOSE A PROGRAMME Press TV PROG +/– or the NUMBER keys to select the 1 pres
Resumen del contenido incluido en la página 13
13 Record One Programme While Watching Another SELECT PRESET TO WATCH Once recording is in progress, all you need to do is to set the preset controls on the TV for the station you 1 wish to view. c The programme selected with the TV’s preset controls appears on the TV screen while the one selected with the recorder's TV PROG buttons is recorded on the tape. Elapsed Recording Time Indication You can check the exact time of a recording. SET COUNTER DISPLAY – –:– – Press – –:– – until a counter rea
Resumen del contenido incluido en la página 14
SP/LP BASIC OPERATIONS (cont.) 14 With Video Plus+, timer programming is greatly simplified because each TV programme has a corresponding code number which your recorder is able to recognise. Video Plus+ ACCESS VIDEO PLUS+ SCREEN Press PROG. VIDEO PLUS+ Timer 1 Programming [0 – 9] = [+/–] : EXPRESS PROGRAMING [PROG] : EXIT Before performing Video Plus+ Timer Programming: c Make sure that the recorder's built-in clock is set The front display panel looks like this: properly. c Insert a cassette
Resumen del contenido incluido en la página 15
% % 15 Satellite Receiver Users SET TAPE SPEED To timer-record a satellite broadcast using Video Plus+: Press SP/LP ( ) to set the tape speed. 1 Set "AV2 SELECT" to the appropriate mode. Z pg. 35 2 Perform steps 1 – 7. 4 3 Set the satellite receiver to the appropriate channel before the selected programme begins. SET PDC MODE 4 Leave the satellite receiver's power on. Press PDC to select "ON" or "OFF". If "VPS/PDC ON" is displayed on the screen or "VPS/ 5 PDC" is lit on the display panel, PDC is
Resumen del contenido incluido en la página 16
PDC SP/LP STOP+/– DATE+/– BASIC OPERATIONS (cont.) 16 If you don’t know the PlusCode number for the programme you wish to record, use the following procedure to set your recorder to timer-record the programme. Express Timer ACCESS VIDEO PLUS+ SCREEN Programming Press PROG. 1 Before performing Express Timer Programming: c Make sure that the recorder's built-in clock is set properly. ACCESS PROGRAMME c Insert a cassette with the safety tab in place. The recorder SCREEN will come on automatically.
Resumen del contenido incluido en la página 17
17 Satellite Receiver Users ENTER PRESET POSITION To timer-record a satellite broadcast using Express Timer Press TV PROG +/– to Programming: – P1 – enter the preset position 1 Set "AV2 SELECT" to the appropriate mode. Z pg. 35 START STOP 6 corresponding to the 2 Perform steps 1 – 10. Enter "L-2" for the preset position 21:00 = 22:00 broadcasting station you in step 6. SP VPS/PDC OFF wish to record. 3 Set the satellite receiver to the appropriate channel DATE TV PROG before the selected programm
Resumen del contenido incluido en la página 18
SP/LP DATE+/– BASIC OPERATIONS (cont.) 18 Check, Cancel And Replace Programmes DISENGAGE TIMER MODE Press ä, then press . 1 123 ACCESS PROGRAMME CHECK 2 45 6 SCREEN/DISPLAY Press . 7 89 PR START STOP CH DATE PDC 1 8:00 10:00 3 24.12 4 2 2 10:00 10:45 2 25.12 0 3 11:30 13:00 1 25.12 4 TV PROG+/– 5 6 START+/– 7 8 1 [ ] : NEXT ACCESS PROGRAMME SCREEN/ OK DISPLAY Press again to check – P1 – more information. Each START STOP time you press , the 3 8:00 = 10:00 next programme's SP VPS/PDC OFF infor
Resumen del contenido incluido en la página 19
% % ADVANCED OPERATIONS 19 S-VHS (Super VHS) and VHS Your recorder can record in either S-VHS or VHS. Recording To record in S-VHS: Perform the steps 1 – 4 below to set "S-VHS" to "AUTO". Then, insert a cassette marked "S-VHS", the S-VHS indicator will According To light on the display panel. The S-VHS recording mode will be selected. To record in VHS: Tape Type Insert a cassette marked "VHS". The VHS recording mode will be automatically selected regardless of the S-VHS mode setting. To record i
Resumen del contenido incluido en la página 20
% % PLAY ADVANCED OPERATIONS (cont.) 20 B.E.S.T. Picture System The B.E.S.T. (Biconditional Equalised Signal Tracking) system Playback/ checks the condition of the tape in use during recording and playback, and compensates to provide the highest-possible recording and playback pictures. The default setting for both recording and playback is “ON”. Recording TURN ON THE RECORDER According To Press . 1 Tape Charac- ACCESS MAIN MENU SCREEN teristics Press MENU. Turn on the TV and select the VIDEO ch
