Manual de instrucciones de Panasonic AJ-D455

Resumen del contenido incluido en la página 1

Panasonic Broadcast




AJ-D455
Menu Information

Resumen del contenido incluido en la página 2

Setup (default settings) The unit’s major settings are performed by making selections on menus. The setting menus appear on the TV monitor when the TV monitor and VIDEO OUT 3 connector in the unit's connector area are hooked up. The menus can be output to the SDI OUT 3 connector as well when the AJ-YA455P component serial interface board is used. Changing the settings Press the MENU button. 1 The setup menu appears on the TV monitor and setup menu No. appears on the counter display. (If the setu

Resumen del contenido incluido en la página 3

Setup menus This unit can store up to 5 user files (user 1 to user 5) containing different menu settings, and these files can be selected and used. Changing the file Press the MENU button. 1 2 Hold down the FILE button and press the cursor button to switch to the next user file. Hold down the FILE button and press the cursor button to switch to the previous user file. SYSTEM USER 1 USER 2 USER 3 USER 4 USER 5 USER FILE Each user file contains the following items. • BASIC • OPERATION • INTERFAC

Resumen del contenido incluido en la página 4

Lock mode can be set to protect the settings in the system files and user files (USER2 – USER5). Settings can no longer be changed when this mode is set. To set and release the lock mode for the system files and user files use setup item No. 30 (MENU LOCK) and setup menu item No. A03 (MENU LOCK), respectively. Setting and releasing the lock mode. Press the MENU button. 1 2 While holding down the FILE button, press the or button, and select the file for which the lock mode is to be set or relea

Resumen del contenido incluido en la página 5

Setup menus The contents of the USER2 – USER5 files can be copied (loaded) into the USER1 file. In addition, the contents of the USER1 file can be copied (saved) to the USER2 – USER5 files. Load or save USER1 USER2 Settings can be locked. Load or save USER3 Settings can be locked. Load or save USER4 Settings can be locked. Load or save USER5 Settings can be locked. Loading a user file Press the MENU button. 1 2 While holding down the FILE button, press the or button, and select USER1. Press th

Resumen del contenido incluido en la página 6

Saving a user file Press the MENU button. 1 2 While holding down the FILE button, press the or button, and select USER1. Press the or button and move the cursor ( ) on the menu screen to setup item 3 ∗ No. A01 (SAVE). SETUP-MENU MENU NO.A00 - 0000 723 DV PB ATT OFF A00 LOAD USER2 A01 SAVE USER2 ∗ A02 P.ON LOAD OFF END 4 Press the or button and select the user file into which the USER1 contents are to be saved. User files which have been set to

Resumen del contenido incluido en la página 7

Setup menus SYSTEM menu Item Setting Superimposed Superimposed Description No. No. display display System phase rough adjustment: 90° units 00 SYS SC 0000 0 COAR. 0001 90 If setting operation is performed, the setting value does not 0002 180 return to factory (default) setting. 0003 270 System phase fine adjustment: Variable range ±45° or more 01 SYS SC 0000 –127 .. .. –: advanced .. FINE +: delayed 0127 0 .. .. .. If setting operation is performed, the setting v

Resumen del contenido incluido en la página 8

SYSTEM menu (continued) Item Setting Superimposed Superimposed Description No. No. display display For setting the chroma level. 18 CHROMA 0000 –127 .. .. The maximum amount by which the level can be varied is from .. LEVEL –3 to +3 dB. 0127 0 .. .. .. 0255 128 For adjusting the system phase offset: 4.48 µ s steps 21 SYS H 0000 –3 0: –13.4 µ s OFFSET 0001 –2 1: –8.96 µ s 0002 –1 2: –4.48 µ s 0003 0 3: 0 0004 4 4: +4.48 µ s 0005 5 5: +8.96 µ s 0006 6 6: +13.4 µ s

Resumen del contenido incluido en la página 9

Setup menus USER menu Item Setting Superimposed Superimposed Description No. No. display display This sets the preroll time which can be set from 0 to 15 seconds 000 P-ROLL 0000 0S .. .. in 1-second increments. .. TIME 0005 5S .. .. The unit will not operate if the preroll time is set to 0 seconds .. when the unit is set to automatic editing (PREVIEW, AUTO 0015 15S EDIT COMMAND) from an external controller. This sets the position of the characters on the horizontal plane 00

Resumen del contenido incluido en la página 10

USER menu (continued) Item Setting Superimposed Superimposed Description No. No. display display This selects the 12 or 24 hour display for the CTL counter. 005 TAPE 0000 ±12h 0: 12 hour display TIMER 0001 24h 1: 24 hour display This selects the display type for the super display output to the 007 CHARA 0000 WHITE VIDEO OUT 3/SERIAL OUT 3* connector as well as for TYPE 0001 W/OUT displays such as the setting menu, etc. 0: White characters against a black background. 1: White character

Resumen del contenido incluido en la página 11

Setup menus USER menu Item Setting Superimposed Superimposed Description No. No. display display This sets the maximum speed for shuttle operations. 101 SHTL MAX 0000 ×16 0: 16× normal speed 0001 ×32 1: 32× normal speed 0002 ×60 2: 60× normal speed When a DV or DVCAM cassette is used, the 32× speed will be set even if “×60” has been selected as this item’s setting. This sets the maximum speed for FF and REW operations. 102 FF. REW 0000 ×32 0: 32× normal speed MAX 0001 ×60 1:

Resumen del contenido incluido en la página 12

USER menu (continued) Item Setting Superimposed Superimposed Description No. No. display display This selects whether the VTR is to stop automatically when 113 MEMORY 0000 OFF the counter value reaches “0” during a fast forwarding or STOP 0001 ON rewinding operation in the CTL mode. 0: The VTR does not stop. 1: The VTR stops automatically. 1. The stop mode concerned is either the stop or the still- picture mode depending on the setup menu No. 313 (AFTER CUE-UP) setting. 2.

Resumen del contenido incluido en la página 13

Setup menus USER menu Item Setting Superimposed Superimposed Description No. No. display display This selects whether the 9-Pin connector functions when the 201 9P SEL 0000 OFF REMOTE/LOCAL switch has been set to REMOTE. 0001 ON 0: Do not function 1: Function This selects the ID information which is returned to the 202 ID SEL 0000 OTHER controller. 0001 DVCPRO 0: 20 25H 0002 ORIG 1: DVCPRO’s, own ID is returned (F0 33H). 2: The unit’s own ID (A0 3CH) is returned. Set “

Resumen del contenido incluido en la página 14

USER menu Item Setting Superimposed Superimposed Description No. No. display display This selects STD or NON-STD in accordance with the com- 303 STD/ 0000 AUTO posite input signal. NON-STD 0001 STD 0: Standard/non-standard signals are automatically identified 0002 N-STD and processed. 1: Standard signals are processed. (Forced STD) 2: Non-standard signals are processed. (Forced NON-STD) This selects the video signal processing. 304 SERVO 0000 AUTO 0: Servo is synchronized with the inp

Resumen del contenido incluido en la página 15

Setup menus USER menu (continued) Item Setting Superimposed Superimposed Description No. No. display display This selects the mode after cue-up operation is complete. 313 AFTER 0000 STOP 0: STOP mode CUE-UP 0001 STILL1 1: SHTL STILL mode 0002 STILL2 2: VAR STILL mode This selects the connection with the AJ-YA752 audio memory 315 AUD MEM 0000 OFF unit. UNIT 0001 MODE1 0: When the audio memory unit is not going to be used 0002 MODE2 1: When a voice-over operation is to be conduct

Resumen del contenido incluido en la página 16

USER menu (continued) Item Setting Superimposed Superimposed Description No. No. display display This sets the maximum JOG FWD speed. 320 JOG FWD 0000 +4.1 0: +4.1× (+3.1×) speed MAX 0001 +1.85 1: +1.85× (+1.85×) speed 0002 +1 2: +1× (+1×) speed • The speeds in parentheses apply when a DV or DVCAM cassette is used. • At any speed setting other than 0 (+4.1×), the phase cannot be synchronized from an editing controller which synchro- nizes the phase using the JOG command. This

Resumen del contenido incluido en la página 17

Setup menus USER menu Item Setting Superimposed Superimposed Description No. No. display display This selects the length of time until tape protection mode is 400 STILL 0000 0.5s established when a DVCPRO tape is inserted and the unit is TIMER 0001 5s in STOP or STILL mode. 0002 10s (Unit: s = second, min = minute) 0003 20s 0004 30s 0005 40s 0006 50s 0007 1min 0008 2min This selects the operation during the tape protection mode 401 SRC 0000 STEP when the unit is left standing in t

Resumen del contenido incluido en la página 18

USER menu Item Setting Superimposed Superimposed Description No. No. display display This sets the position where the VITC signal is to be inserted. 500 VITC 0000 10L .. .. (The same line as for VITC POS-2 in 501 cannot be .. POS-1 selected.) 0006 16L .. .. .. 0010 20L This sets the position where the VITC signal is to be inserted. 501 VITC 0000 10L .. .. (The same line as for VITC POS-1 in 500 cannot be .. POS-2 selected.) 0008 18L .. .. .. 0010 20L This selects whether to

Resumen del contenido incluido en la página 19

Setup menus USER menu (continued) Item Setting Superimposed Superimposed Description No. No. display display This selects the DF/NDF mode for CTL and TCG. 509 DF MODE 0000 DF 0: Drop frame mode. 0001 NDF 1: Non-drop frame mode. No. 509 is valid when the CONTROL is LOCAL or LOCAL ENA of item 004 to “ENA”. This selects the time code generator run mode. 510 RUN MODE 0000 REC 0: Generator runs only during recording. 0001 FREE 1: Generator runs during usual operation.

Resumen del contenido incluido en la página 20

USER menu